Home
last modified time | relevance | path

Searched +full:board +full:- +full:delay +full:- +full:ps (Results 1 – 25 of 64) sorted by relevance

123

/linux/Documentation/devicetree/bindings/mtd/
H A Dcdns,hp-nfc.yaml1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/mtd/cdns,hp-nfc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
13 - $ref: nand-controller.yaml
18 - const: cdns,hp-nfc
22 - description: Controller register set
23 - description: Slave DMA data port register set
25 reg-names:
[all …]
/linux/Documentation/devicetree/bindings/memory-controllers/
H A Dmvebu-devbus.txt9 - compatible: Armada 370/XP SoC are supported using the
10 "marvell,mvebu-devbus" compatible string.
13 "marvell,orion-devbus" compatible string.
15 - reg: A resource specifier for the register space.
20 - #address-cells: Must be set to 1
21 - #size-cells: Must be set to 1
22 - ranges: Must be set up to reflect the memory layout with four
23 integer values for each chip-select line in use:
28 - devbus,keep-config This property can optionally be used to keep
37 - devbus,turn-off-ps: Defines the time during which the controller does not
[all …]
/linux/Documentation/devicetree/bindings/net/
H A Drenesas,etheravb.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sergei Shtylyov <sergei.shtylyov@gmail.com>
15 - items:
16 - enum:
17 - renesas,etheravb-r8a7742 # RZ/G1H
18 - renesas,etheravb-r8a7743 # RZ/G1M
19 - renesas,etheravb-r8a7744 # RZ/G1N
20 - renesas,etheravb-r8a7745 # RZ/G1E
[all …]
/linux/arch/arm/boot/dts/intel/socfpga/
H A Dsocfpga_cyclone5_vining_fpga.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR X11)
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
12 compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
16 stdout-path = "serial0:115200n8";
34 gpio-keys {
35 compatible = "gpio-keys";
68 regulator-usb-nrst {
69 compatible = "regulator-fixed";
70 regulator-name = "usb_nrst";
[all …]
H A Dsocfpga_cyclone5_sodia.dts1 // SPDX-License-Identifier: GPL-2.0+
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
11 model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
12 compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga";
16 stdout-path = "serial0:115200n8";
30 compatible = "regulator-fixed";
31 regulator-name = "3.3V";
32 regulator-min-microvolt = <3300000>;
33 regulator-max-microvolt = <3300000>;
[all …]
/linux/arch/arm64/boot/dts/renesas/
H A Dr8a77970-v3msk.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the V3M Starter Kit board
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
14 model = "Renesas V3M Starter Kit board";
27 stdout-path = "serial0:115200n8";
30 hdmi-out {
31 compatible = "hdmi-connector";
36 remote-endpoint = <&adv7511_out>;
41 lvds-decoder {
[all …]
H A Dr8a77970-eagle.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the Eagle board with R-Car V3M
5 * Copyright (C) 2016-2017 Renesas Electronics Corp.
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
14 model = "Renesas Eagle board based on r8a77970";
29 stdout-path = "serial0:115200n8";
32 d1p8: regulator-fixed {
33 compatible = "regulator-fixed";
34 regulator-name = "fixed-1.8V";
[all …]
H A Dgray-hawk-single.dtsi1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 * Device Tree Source for the Gray Hawk Single board
6 * Copyright (C) 2024-2025 Glider bv
11 * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture
28 #include <dt-bindings/gpio/gpio.h>
29 #include <dt-bindings/input/input.h>
30 #include <dt-bindings/leds/common.h>
31 #include <dt-bindings/media/video-interfaces.h>
34 model = "Renesas Gray Hawk Single board";
35 compatible = "renesas,gray-hawk-single";
[all …]
H A Dulcb.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the R-Car Gen3 ULCB board
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/input/input.h>
18 model = "Renesas R-Car Gen3 ULCB board";
37 stdout-path = "serial0:115200n8";
40 audio_clkout: audio-clkout {
43 * but needed to avoid cs2000/rcar_sound probe dead-lock
45 compatible = "fixed-clock";
46 #clock-cells = <0>;
[all …]
H A Dwhite-hawk-cpu-common.dtsi1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
27 stdout-path = "serial0:921600n8";
30 sn65dsi86_refclk: clk-x6 {
31 compatible = "fixed-clock";
32 #clock-cells = <0>;
33 clock-frequency = <38400000>;
37 compatible = "gpio-keys";
[all …]
H A Ddraak.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the Draak board
5 * Copyright (C) 2016-2018 Renesas Electronics Corp.
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
13 model = "Renesas Draak board";
21 audio_clkout: audio-clkout {
24 * but needed to avoid cs2000/rcar_sound probe dead-lock
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
[all …]
H A Debisu.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the Ebisu/Ebisu-4D board
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
12 model = "Renesas Ebisu board";
33 stdout-path = "serial0:115200n8";
36 audio_clkout: audio-clkout {
39 * but needed to avoid cs2000/rcar_sound probe dead-lock
41 compatible = "fixed-clock";
42 #clock-cells = <0>;
[all …]
/linux/arch/riscv/boot/dts/starfive/
H A Djh7100-starfive-visionfive-v1.dts1 // SPDX-License-Identifier: GPL-2.0 OR MIT
7 /dts-v1/;
8 #include "jh7100-common.dtsi"
12 compatible = "starfive,visionfive-v1", "starfive,jh7100";
14 gpio-restart {
15 compatible = "gpio-restart";
22 phy-handle = <&phy>;
26 * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires
27 * manual adjustment of the RX internal delay to work properly. The default
28 * RX delay provided by the driver (1.95ns) is too high, but applying a 50%
[all …]
/linux/arch/arm/boot/dts/marvell/
H A Darmada-385-atl-x530.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
3 * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board.
4 (x530/AT-GS980MX)
9 /dts-v1/;
10 #include "armada-385.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
15 model = "x530/AT-GS980MX";
19 stdout-path = "serial1:115200n8";
32 internal-regs {
34 pinctrl-names = "default";
[all …]
/linux/include/linux/platform_data/
H A Dpxa_sdhci.h1 /* SPDX-License-Identifier: GPL-2.0-only */
8 * PXA Platform - SDHCI platform data definitions
17 /* card always wired to host, like on-chip emmc */
19 /* Board design supports 8-bit data on SD/SDIO BUS */
23 * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
26 * mmp2: each step is roughly 100ps, 5bits width
30 * 1: choose feedback clk + delay value
/linux/arch/arm/boot/dts/ti/omap/
H A Domap2420-n8x0-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
11 stdout-path = &uart3;
16 compatible = "i2c-cbus-gpio";
21 #address-cells = <1>;
22 #size-cells = <0>;
25 interrupt-parent = <&gpio4>;
34 clock-frequency = <400000>;
44 clock-frequency = <400000>;
50 /* gpio-irq for dma: 26 */
53 #address-cells = <1>;
[all …]
/linux/arch/arm/boot/dts/allwinner/
H A Dsun8i-a83t-bananapi-m3.dts2 * Copyright 2017 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun8i-a83t.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
51 model = "Banana Pi BPI-M3";
52 compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
60 stdout-path = "serial0:115200n8";
64 compatible = "hdmi-connector";
[all …]
/linux/arch/arm/boot/dts/nxp/imx/
H A Dimx6qp-prtwd3.dts1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
7 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
12 model = "Protonic WD3 board";
16 stdout-path = &uart4;
29 clock_ksz8081: clock-ksz8081 {
30 compatible = "fixed-clock";
31 #clock-cells = <0>;
32 clock-frequency = <50000000>;
35 clock_ksz9031: clock-ksz9031 {
[all …]
/linux/arch/arm/boot/dts/microchip/
H A Dat91-sama5d3_ksz9477_evb.dts1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 /dts-v1/;
9 model = "EVB-KSZ9477";
10 compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
14 stdout-path = &dbgu;
17 reg_3v3: regulator-3v3 {
18 compatible = "regulator-fixed";
19 regulator-name = "3v3";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
[all …]
/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mm-venice-gw7903.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
16 model = "Gateworks Venice GW7903 i.MX8MM board";
17 compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
27 stdout-path = &uart2;
35 gpio-keys {
[all …]
H A Dimx8mp-skov-reva.dtsi1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 #include "imx8mp-nominal.dtsi"
6 #include <dt-bindings/leds/common.h>
27 compatible = "pwm-backlight";
28 pinctrl-0 = <&pinctrl_backlight>;
30 power-supply = <&reg_24v>;
31 enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
32 brightness-levels = <0 255>;
33 num-interpolated-steps = <17>;
34 default-brightness-level = <8>;
[all …]
/linux/drivers/net/ethernet/amd/
H A Dau1000_eth.c1 // SPDX-License-Identifier: GPL-2.0-only
6 * Copyright 2001-2003, 2006 MontaVista Software Inc.
8 * Added ethtool/mii-tool support,
11 * or riemer@riemer-nt.de: fixed the link beat detection with
14 * converted to use linux-2.6.x's PHY framework
22 #include <linux/dma-mapping.h>
38 #include <linux/delay.h>
67 #define DRV_DESC "Au1xxx on-chip Ethernet driver"
202 * make sure there's no out-of-order writes, and that all writes
207 * board-specific configurations
[all …]
/linux/drivers/mtd/nand/raw/
H A Dmpc5121_nfc.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2004-2008 Freescale Semiconductor, Inc.
17 #include <linux/delay.h>
127 return in_be16(prv->regs + reg); in nfc_read()
136 out_be16(prv->regs + reg, val); in nfc_write()
207 wake_up(&prv->irq_waitq); in mpc5121_nfc_irq()
221 rv = wait_event_timeout(prv->irq_waitq, in mpc5121_nfc_done()
225 dev_warn(prv->dev, in mpc5121_nfc_done()
236 u32 pagemask = chip->pagemask; in mpc5121_nfc_addr_cycle()
238 if (column != -1) { in mpc5121_nfc_addr_cycle()
[all …]
/linux/arch/arm64/boot/dts/allwinner/
H A Dsun50i-a64-olinuxino.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 /dts-v1/;
6 #include "sun50i-a64.dtsi"
7 #include "sun50i-a64-cpu-opp.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
12 model = "Olimex A64-Olinuxino";
13 compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
21 stdout-path = "serial0:115200n8";
24 hdmi-connector {
25 compatible = "hdmi-connector";
[all …]
/linux/drivers/ata/
H A Data_piix.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * ata_piix.c - Intel PATA/SATA controllers
6 * Please ALWAYS copy linux-ide@vger.kernel.org
9 * Copyright 2003-2005 Red Hat Inc
10 * Copyright 2003-2005 Jeff Garzik
14 * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
15 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
18 * libata documentation is available via 'make {ps|pdf}docs',
19 * as Documentation/driver-api/libata.rst
40 * PIIX4 errata #9 - Only on ultra obscure hw
[all …]

123