| /freebsd/sys/contrib/device-tree/Bindings/iio/frequency/ |
| H A D | adf4350.txt | 4 - compatible: Should be one of 7 - reg: SPI chip select numbert for the device 8 - spi-max-frequency: Max SPI frequency to use (< 20000000) 9 - clocks: From common clock binding. Clock is phandle to clock for 13 - gpios: GPIO Lock detect - If set with a valid phandle and GPIO number, 15 - adi,channel-spacing: Channel spacing in Hz (influences MODULUS). 16 - adi,power-up-frequency: If set in Hz the PLL tunes to 18 - adi,reference-div-factor: If set the driver skips dynamic calculation 20 - adi,reference-doubler-enable: Enables reference doubler. 21 - adi,reference-div2-enable: Enables reference divider. [all …]
|
| H A D | adi,adf4350.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Michael Hennerich <michael.hennerich@analog.com> 15 - adi,adf4350 16 - adi,adf4351 21 spi-max-frequency: 28 clock-names: 31 '#clock-cells': 34 clock-output-names: [all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/display/msm/ |
| H A D | dp-controller.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/msm/dp-controller.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Kuogee Hsieh <quic_khsieh@quicinc.com> 19 - enum: 20 - qcom,sc7180-dp 21 - qcom,sc7280-dp 22 - qcom,sc7280-edp 23 - qcom,sc8180x-dp [all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/phy/ |
| H A D | qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Vinod Koul <vkoul@kernel.org> 19 - qcom,ipq6018-qmp-usb3-phy 20 - qcom,ipq8074-qmp-usb3-phy 21 - qcom,ipq9574-qmp-usb3-phy 22 - qcom,msm8996-qmp-usb3-phy 23 - qcom,qdu1000-qmp-usb3-uni-phy [all …]
|
| H A D | qcom,qmp-usb3-dp-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 5 $id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#" 6 $schema: "http://devicetree.org/meta-schemas/core.yaml#" 11 - Wesley Cheng <quic_wcheng@quicinc.com> 16 - qcom,sc7180-qmp-usb3-dp-phy 17 - qcom,sc7280-qmp-usb3-dp-phy 18 - qcom,sc8180x-qmp-usb3-dp-phy 19 - qcom,sc8280xp-qmp-usb43dp-phy 20 - qcom,sdm845-qmp-usb3-dp-phy [all …]
|
| H A D | qcom,qmp-usb-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Vinod Koul <vkoul@kernel.org> 19 - qcom,ipq6018-qmp-usb3-phy 20 - qcom,ipq8074-qmp-usb3-phy 21 - qcom,msm8996-qmp-usb3-phy 22 - qcom,msm8998-qmp-usb3-phy 23 - qcom,qcm2290-qmp-usb3-phy [all …]
|
| H A D | qcom,sc8280xp-qmp-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Vinod Koul <vkoul@kernel.org> 19 - qcom,sa8775p-qmp-gen4x2-pcie-phy 20 - qcom,sa8775p-qmp-gen4x4-pcie-phy 21 - qcom,sc8180x-qmp-pcie-phy 22 - qcom,sc8280xp-qmp-gen3x1-pcie-phy 23 - qcom,sc8280xp-qmp-gen3x2-pcie-phy [all …]
|
| H A D | qcom,sc7180-qmp-usb3-dp-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 15 qcom,sc8280xp-qmp-usb43dp-phy.yaml. 18 - Wesley Cheng <quic_wcheng@quicinc.com> 23 - enum: 24 - qcom,sc7180-qmp-usb3-dp-phy 25 - qcom,sc8180x-qmp-usb3-dp-phy 26 - qcom,sdm845-qmp-usb3-dp-phy [all …]
|
| H A D | qcom,sc8280xp-qmp-usb43dp-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb43d [all...] |
| H A D | qcom,msm8996-qmp-usb3-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-usb [all...] |
| /freebsd/sys/contrib/device-tree/Bindings/pci/ |
| H A D | qcom,pcie.txt | 3 - compatible: 7 - "qcom,pcie-ipq8064" for ipq8064 8 - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065 9 - "qcom,pcie-apq8064" for apq8064 10 - "qcom,pcie-apq8084" for apq8084 11 - "qcom,pcie-msm8996" for msm8996 or apq8096 12 - "qcom,pcie-ipq4019" for ipq4019 13 - "qcom,pcie-ipq8074" for ipq8074 14 - "qcom,pcie-qcs404" for qcs404 15 - "qcom,pcie-sc8180x" for sc8180x [all …]
|
| H A D | qcom,pcie-ep.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 15 - enum: 16 - qcom,sa8775p-pcie-ep 17 - qcom,sdx55-pcie-ep 18 - qcom,sm8450-pcie-ep 19 - items: [all …]
|
| H A D | qcom,pcie-sc7280.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Bjorn Andersson <andersson@kernel.org> 11 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 19 const: qcom,pcie-sc7280 25 reg-names: 28 - const: parf # Qualcomm specific registers 29 - const: dbi # DesignWare PCIe registers [all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/display/bridge/ |
| H A D | ps8640.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Nicolas Boichat <drinkcat@chromium.org> 13 The PS8640 is a low power MIPI-to-eDP video format converter supporting 28 powerdown-gpios: 32 reset-gpios: 36 vdd12-supply: 37 description: Regulator for 1.2V digital core power. 39 vdd33-supply: [all …]
|
| H A D | ti,sn65dsi86.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Douglas Anderson <dianders@chromium.org> 23 enable-gpios: 27 suspend-gpios: 31 no-hpd: 37 vccio-supply: 40 vpll-supply: 43 vcca-supply: [all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/display/tegra/ |
| H A D | nvidia,tegra124-sor.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-so [all...] |
| H A D | nvidia,tegra20-host1x.txt | 4 - compatible: "nvidia,tegra<chip>-host1x" 5 - reg: Physical base address and length of the controller's registers. 6 For pre-Tegra186, one entry describing the whole register area. 7 For Tegra186, one entry for each entry in reg-names: 8 "vm" - VM region assigned to Linux 9 "hypervisor" - Hypervisor region (only if Linux acts as hypervisor) 10 - interrupts: The interrupt outputs from the controller. 11 - #address-cells: The number of cells used to represent physical base addresses 13 - #size-cells: The number of cells used to represent the size of an address 15 - ranges: The mapping of the host1x address space to the CPU address space. [all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/clock/ |
| H A D | qcom,kpss-acc-v1.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/clock/qcom,kpss-ac [all...] |
| /freebsd/sys/contrib/device-tree/src/arm/qcom/ |
| H A D | qcom-sdx55.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 9 #include <dt-bindings/clock/qcom,gcc-sdx55.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/interconnect/qcom,sdx55.h> 13 #include <dt-bindings/interrupt-controller/arm-gic.h> 14 #include <dt-bindings/power/qcom-rpmpd.h> 15 #include <dt-bindings/soc/qcom,rpmh-rsc.h> 18 #address-cells = <1>; 19 #size-cells = <1>; [all …]
|
| H A D | qcom-sdx65.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 9 #include <dt-bindings/clock/qcom,gcc-sdx65.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include <dt-bindings/power/qcom-rpmpd.h> 14 #include <dt-bindings/soc/qcom,rpmh-rsc.h> 15 #include <dt-bindings/interconnect/qcom,sdx65.h> 18 #address-cells = <1>; 19 #size-cells = <1>; [all …]
|
| /freebsd/sys/contrib/device-tree/src/arm64/rockchip/ |
| H A D | rk3588-extra.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include "rk3588-base.dtsi" 7 #include "rk3588-extra-pinctrl.dtsi" 11 compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; 16 clock-names = "ref_clk", "suspend_clk", "bus_clk"; 19 phy-names = "usb2-phy", "usb3-phy"; 21 power-domains = <&power RK3588_PD_USB>; 24 snps,dis-u2-freeclk-exists-quirk; 25 snps,dis-del-phy-power-chg-quirk; 26 snps,dis-tx-ipgap-linecheck-quirk; [all …]
|
| H A D | px30-engicam-common.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 15 vcc5v0_sys: vcc5v0-sys { 16 compatible = "regulator-fixed"; 17 regulator-name = "vcc5v0_sys"; /* +5V */ 18 regulator-always-on; 19 regulator-boot-o [all...] |
| /freebsd/sys/contrib/device-tree/src/arm64/mediatek/ |
| H A D | mt8186-corsola-steelix.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8186-corsola.dtsi" 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/input/input.h> 12 pp1000_edpbrdg: regulator-pp1000-edpbrdg { 13 compatible = "regulator-fixed"; 14 regulator-name = "pp1000_edpbrdg"; 15 pinctrl-names = "default"; 16 pinctrl-0 = <&en_pp1000_edpbrdg>; [all …]
|
| H A D | mt8186-corsola-krabby.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8186-corsola.dtsi" 8 #include <dt-bindings/gpio/gpio.h> 17 remote-endpoint = <&ps8640_in>; 21 clock-frequency = <400000>; 23 edp-bridge@8 { 26 pinctrl-names = "default"; 27 pinctrl-0 = <&ps8640_pins>; 28 powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>; [all …]
|
| /freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
| H A D | sc8280xp.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 7 #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> 8 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> 9 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/clock/qcom,sc8280xp-camcc.h> 12 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> 13 #include <dt-bindings/interconnect/qcom,osm-l3.h> 14 #include <dt-bindings/interconnect/qcom,sc8280xp.h> 15 #include <dt-bindings/interrupt-controller/arm-gic.h> [all …]
|