| /freebsd/sys/contrib/device-tree/Bindings/thermal/ |
| H A D | nvidia,tegra124-soctherm.txt | 4 or interrupt-based thermal monitoring, CPU and GPU throttling based
10 - compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
11 For Tegra132, must contain "nvidia,tegra132-soctherm".
12 For Tegra210, must contain "nvidia,tegra210-soctherm".
13 - reg : Should contain at least 2 entries for each entry in reg-names:
14 - SOCTHERM register set
15 - Tegra CAR register set: Required for Tegra124 and Tegra210.
16 - CCROC register set: Required for Tegra132.
17 - reg-names : Should contain at least 2 entries:
18 - soctherm-reg
[all …]
|
| H A D | nvidia,tegra124-soctherm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/thermal/nvidia,tegra124-soctherm.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
14 polled or interrupt-based thermal monitoring, CPU and GPU throttling based
21 - nvidia,tegra124-soctherm
22 - nvidia,tegra132-soctherm
23 - nvidia,tegra210-soctherm
[all …]
|
| /freebsd/contrib/xz/src/xz/ |
| H A D | message.c | 1 // SPDX-License-Identifier: 0BSD
69 // Use alarm() and SIGALRM when they are supported. This has two minor
71 // - It is possible for the user to send SIGINFO, SIGUSR1, or SIGALRM to
72 // get intermediate progress information even when --verbose wasn't used
74 // - alarm() + SIGALRM seems to have slightly less overhead than polling
116 // If --verbose is used, we use a progress indicator if and only in message_init()
119 // exception, even if --verbose was not used, user can send SIGALRM in message_init()
155 --verbosity; in message_verbosity_decrease()
178 /// I think it looks nicer to not print "(stdin)" when --verbose is used
197 // to usage of --files or --files0. in print_filename()
[all …]
|
| /freebsd/contrib/ntp/ntpd/ |
| H A D | refclock_wwv.c | 2 * refclock_wwv - clock driver for NIST WWV/H time/frequency station
43 * kHz and mu-law companding. This is the same standard as used by the
53 * Report 97-8-1, University of Delaware, August 1997, 25 pp., available
61 * a nonzero ICOM ID select code. The C-IV trace is turned on if the
68 * port, where 0 is the mike port (default) and 1 is the line-in port.
74 * CEVNT_PROP propagation failure - no stations heard
82 #define PRECISION (-10) /* precision assumed (about 1 ms) */
92 #define DATCYC 170 /* data filter cycles */
93 #define DATSIZ (DATCYC * MS) /* data filter siz
574 int alarm; /* alarm flashers */ global() member
[all...] |
| H A D | refclock_irig.c | 2 * refclock_irig - audio IRIG-B/E demodulator/decoder
26 * Audio IRIG-B/E demodulator/decoder
29 * IRIG-B/E signals commonly produced by GPS receivers and other timing
30 * devices. The IRIG signal is an amplitude-modulated carrier with
31 * pulse-width modulated data bits. For IRIG-B, the carrier frequency is
32 * 1000 Hz and bit rate 100 b/s; for IRIG-E, the carrier frequenchy is
37 * kHz and mu-law companding. This is the same standard as used by the
43 * The program processes 8000-H
[all...] |
| H A D | refclock_wwvb.c | 2 * refclock_wwvb - clock driver for Spectracom WWVB and GPS receivers
36 * The WWVB and GPS clocks should be configured for 24-hour display,
53 * on-time = first <cr>
57 * The alarm condition is indicated by other than ' ' at i, which occurs
65 * on-time = <cr>
72 * The alarm condition is indicated by other than ' ' at i, which occurs
87 * This driver does not need to be told which format is in use - it
117 #define PRECISION (-13) /* precision assumed (about 100 us) */
118 #define PPS_PRECISION (-13) /* precision assumed (about 100 us) */
175 * wwvb_start - ope
[all...] |
| H A D | ntpd-opts.def | 1 /* -*- Mode: Text -*- */
7 prog-name = "ntpd";
8 prog-title = "set clock via Network Time Protocol daemon";
11 #include ntpdbase-opts.def
14 explain = <<- _END_EXPLAIN
17 doc-section = {
18 ds-type = 'DESCRIPTION';
19 ds-format = 'mdoc';
20 ds-text = <<- _END_PROG_MDOC_DESCRIP
27 Network Time Protocol (NTP) version 4, as defined by RFC-5905,
[all …]
|
| H A D | refclock_arbiter.c | 2 * refclock_arbiter - clock driver for Arbiter 1088A/B Satellite
39 * on-time = <cr>
47 * The alarm condition is indicated by a '?' at i, which indicates the
53 * Format TQ (IEEE P1344 estimated worst-case time quality)
81 * deviation mode and connected to a 1-PPS signal, the last two numbers
93 #define PRECISION (-20) /* precision assumed (about 1 us) */
106 #define COMMAND_HALT_BCAST ( (peer->MODE % 2) ? "O0" : "B0" )
107 #define COMMAND_START_BCAST ( (peer->MODE % 2) ? "O5" : "B5" )
143 * arb_start - open the devices and initialize data for processing
160 fd = refclock_open(&peer->srcad in arb_start()
[all...] |
| H A D | refclock_chu.c | 2 * refclock_chu - clock driver for Canadian CHU time/frequency station
44 * kHz and mu-law companding. This is the same standard as used by the
57 * maximum-likelihood technique which exploits the considerable degree
62 * consists of nine, ten-character bursts transmitted at 300 bps between
87 * the DUT1 (d in deciseconds), Gregorian year (yyyy), difference TAI -
101 * coincides with 0.5 - 9 * 11/300 = 0.170 second. Depending on the
110 * connections. With debugging enabled (-d on the ntpd command line),
113 * chuA or chuB followed by the status code and signal level (0-9999).
120 * where n is the number of characters in the burst (0-10), b the burst
121 * distance (0-40), f the field alignment (-1, 0, 1), s the
[all …]
|
| H A D | refclock_pst.c | 2 * refclock_pst - clock driver for PSTI/Traconex WWV/WWVH receivers
25 * The DIPswitches should be set for 9600 bps line speed, 24-hour day-
26 * of-year format and UTC time zone. Automatic correction for DST should
41 * on-time = first <cr>
43 * a = AM/PM indicator (' ' for 24-hour mode)
46 * s = daylight-saving indicator (' ' for 24-hour mode)
61 * The alarm condition is indicated by other than '8' at A, which occurs
76 #define PRECISION (-1
[all...] |
| H A D | ntpd.1ntpdmdoc | 4 .\" EDIT THIS FILE WITH CAUTION (ntpd-opts.mdoc)
6 .\" It has been AutoGen-ed May 25, 2024 at 12:03:54 AM by AutoGen 5.18.16
7 .\" From the definitions ntpd-opts.def
8 .\" and the template file agmdoc-cmd.tpl
17 .Op Fl \-option\-name Ns Oo Oo Ns "=| " Oc Ns Ar value Oc
27 Network Time Protocol (NTP) version 4, as defined by RFC\-5905,
29 version 3, as defined by RFC\-1305, and versions 1
30 and 2, as defined by RFC\-1059 and RFC\-111
[all...] |
| /freebsd/contrib/ntp/html/drivers/ |
| H A D | driver7.html | 1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->17-Jul-2014 02:17<!-- #EndDate -->
20 Modem Port: <tt>/dev/chu<i>u</i></tt>; 300 baud, 8-bits, no parity<br>
21 Autotune Port: <tt>/dev/icom</tt>; 1200/9600 baud, 8-bits, no parity<br>
25 …from Canadian time/frequency station <a href="http://inms-ienm.nrc-cnrc.gc.ca/time_services/shortw…
31 …-compatible, 300-b/s modem or modem chip, as described on the <a href="../pps.html">Pulse-per-seco…
32 …d ray geometry. In Newark DE, 625 km from the transmitter, the predicted one-hop propagation delay…
33 …r, the mean offset with a 2.4-GHz P4 running FreeBSD 6.1 is generally within 0.2 ms short-term wit…
37 <p>The driver processes 8-kHz μ-law companded codec samples using maximum-likelihood techniques …
[all …]
|
| H A D | driver36.html | 1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->15-Nov-2012 06:42<!-- #EndDate -->
20 Autotune Port: <tt>/dev/icom</tt>; 1200/9600 baud, 8-bits, no parity<br>
23 …nected via an optional attenuator and cable to either the microphone or line-in port of a workstat…
24 <p>The driver requires an audio codec or sound card with sampling rate 8 kHz and μ-law compandin…
25 … ray geometry. In Newark DE, 2479 km from the transmitter, the predicted two-hop propagation delay…
26 …r, the mean offset with a 2.4-GHz P4 running FreeBSD 6.1 is generally within 0.1 ms short-term wit…
30 …-kHz μ-law companded codec samples using maximum-likelihood techniques which exploit the consid…
31 …ecision radio clock for WWV transmissions. Electrical Engineering Report 97-8-1, University of Del…
[all …]
|
| H A D | driver4.html | 1 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
8 <!--
10 font-family: Symbol
12 -->
19 <!-- #BeginDate format:En2m -->11-Sep-2010 05:56<!-- #EndDate -->
26 Serial Port: <tt>/dev/wwvb<i>u</i></tt>; 9600 baud, 8-bits, no parity<br>
31 <p>The DIPswitches on these clocks should be set to 24-hour display, AUTO DST off, data format 0 or…
35 <p>on-time = first <cr><br>
38 <p>The alarm condition is indicated by other than ' ' at <tt>i</tt>, which occurs during initial sy…
[all …]
|
| H A D | driver11.html | 1 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="Content-Type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->11-Sep-2010 05:56<!-- #EndDate -->
20 Serial Port: <tt>/dev/gps<i>u</i></tt>; 9600 baud, 8-bits, no parity<br>
29 on-time = <cr>
36 <p>The alarm condition is indicated by a '?' at i, which indicates the receiver is not synchronized…
38 <p>Format <tt>TQ</tt> (IEEE P1344 estimated worst-case time quality)</p>
58 <p>A three-stage median filter is used to reduce jitter and provide a dispersion measure. The drive…
60 …t>clockstats</tt> file. The deviation data operates with an external pulse-per-second (PPS) input,…
|
| /freebsd/share/misc/ |
| H A D | usb_hid_usages | 4 # - lines that do not start with a white space give the number and name of
6 # - lines that start with a white space give the number and name of
20 0x08 Multi-axis Controller
62 0x90 D-pad Up
63 0x91 D-pad Down
64 0x92 D-pad Right
65 0x93 D-pad Left
107 0xB2 Anti-Torque Control
278 0x2D Keyboard - and (underscore)
283 0x32 Keyboard Non-US # and ~
[all …]
|
| /freebsd/contrib/pf/pflogd/ |
| H A D | pflogd.c | 12 * - Redistributions of source code must retain the above copyright
14 * - Redistributions in binary form must reproduce the above
43 #include <pcap-int.h>
70 char *filter = NULL; variable
117 static int suspended = -1;
127 setproctitle("[%s] -s %d -i %s -f %s", in set_suspended()
179 fprintf(stderr, "usage: pflogd [-Dx] [-d delay] [-f filename]"); in usage()
180 fprintf(stderr, " [-i interface] [-p pidfile]\n"); in usage()
181 fprintf(stderr, " [-s snaplen] [expression]\n"); in usage()
214 if (pcap_compile(hpcap, &bprog, filter, PCAP_OPT_FIL, 0) < 0) in set_pcap_filter()
[all …]
|
| /freebsd/usr.sbin/lpr/lpd/ |
| H A D | printjob.c | 1 /*-
2 * SPDX-License-Identifier: BSD-3-Clause
33 #include "lp.cdefs.h" /* A cross-platform version of <sys/cdefs.h> */
35 * printjob -- print jobs in the queue.
77 #define REPRINT -2
78 #define ERROR -1
88 static pid_t of_pid; /* process id of output filter, if any */
92 static int ofd; /* output filter file descriptor */
93 static int tfd = -1; /* output filter temp file output */
99 /* these two are set from pp->daemon_user, but only if they are needed */
[all …]
|
| /freebsd/contrib/bsnmp/snmp_ntp/ |
| H A D | NTP-MIB.txt | 1 --
2 -- NTP MIB, Revision 0.2, 7/25/97
3 --
5 NTP-MIB DEFINITIONS ::= BEGIN
8 Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,
10 FROM SNMPv2-SMI
12 TEXTUAL-CONVENTION, TruthValue
13 FROM SNMPv2-TC;
15 ntpMIB MODULE-IDENTITY
16 LAST-UPDATED "199707251530Z"
[all …]
|
| /freebsd/contrib/ntp/ntpdate/ |
| H A D | ntpdate.c | 2 * ntpdate - set the time of day by polling one or more NTP servers
75 #define TARGET_RESOLUTION 1 /* Try for 1-millisecond accuracy
86 # define NTPDATE_PRIO (-12)
92 /* POSIX TIMERS - vxWorks doesn't have itimer - casey */
102 #define NTP_INFIN 15 /* max stratum, infinity a la Bellman-Ford */
135 * Alarm flag. Set when an alarm occurs
249 * Alarm flag. Set when an alarm occurs in clear_globals()
439 …"usage: %s [-46bBdqsuv] [-a key#] [-e delay] [-k file] [-p samples] [-o version#] [-t timeo] serve… in ntpdatemain()
445 * If number of Samples (-p) not specified by user: in ntpdatemain()
446 * - if a simple_query (-q) just ONE will do in ntpdatemain()
[all …]
|
| /freebsd/sys/arm/allwinner/ |
| H A D | aw_thermal.c | 1 /*-
94 #define A83T_FILTER 0x5 /* Filter enabled, avg of 4 */
102 #define A64_FILTER 0x6 /* Filter enabled, avg of 8 */
110 #define H3_FILTER 0x6 /* Filter enabled, avg of 8 */
121 #define H5_FILTER 0x6 /* Filter enabled, avg of 8 */
161 uint32_t filter; member
175 return ((A83T_TEMP_BASE - (val * A83T_TEMP_MUL)) / A83T_TEMP_DIV); in a83t_to_temp()
197 .filter = A83T_FILTER,
207 return ((A64_TEMP_BASE - (val * A64_TEMP_MUL)) / A64_TEMP_DIV); in a64_to_temp()
229 .filter = A64_FILTER,
[all …]
|
| /freebsd/contrib/tcp_wrappers/ |
| H A D | safe_finger.c | 2 * safe_finger - finger client wrapper that protects against nasty stuff
6 * Build with: cc -o safe_finger safe_finger.c
65 if ((pwd = getpwnam(UNPRIV_NAME)) && pwd->pw_uid > 0) { in main()
66 setgid(pwd->pw_gid); in main()
67 setuid(pwd->pw_uid); in main()
88 (void) alarm(TIME_LIMIT); in main()
91 * Main filter loop. in main()
96 printf("\n\n Input truncated to %d bytes...\n", input_count - 1); in main()
129 while ((wait_pid = wait(&finger_status)) != -1 && wait_pid != finger_pid) in main()
134 /* perror_exit - report system error text and terminate */
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm/renesas/ |
| H A D | r9a06g032.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
10 #include <dt-bindings/clock/r9a06g032-sysctrl.h>
14 #address-cells = <1>;
15 #size-cells = <1>;
18 #address-cells = <1>;
19 #size-cells = <0>;
23 compatible = "arm,cortex-a7";
30 compatible = "arm,cortex-a7";
33 enable-method = "renesas,r9a06g032-smp";
[all …]
|
| /freebsd/tests/sys/fifo/ |
| H A D | fifo_io.c | 1 /*-
50 * - If there's no data to read, then for blocking fifos, we block, and for
51 * non-blocking, we return EAGAIN.
53 * - If we write ten bytes, ten bytes can be read, and they're the same
56 * - If we write two batches of five bytes, we can read the same ten bytes in
59 * - If we write ten bytes, we can read the same ten bytes in two reads of
62 * - If we over-fill a buffer (by writing 512k, which we take to be a large
65 * - That once 512k (ish) is read from the other end, the blocked writer
68 * - When a fifo is empty, poll, select, kqueue, and fionread report it is
71 * - When a fifo has data in it, poll, select, and kqueue report that it is
[all …]
|
| /freebsd/sys/dev/ixgbe/ |
| H A D | ixgbe_type.h | 2 SPDX-License-Identifier: BSD-3-Clause
4 Copyright (c) 2001-2020, Intel Corporation
42 * - IXGBE_ERROR_INVALID_STATE
48 * - IXGBE_ERROR_POLLING
53 * - IXGBE_ERROR_CAUTION
58 * - IXGBE_ERROR_SOFTWARE
64 * - IXGBE_ERROR_ARGUMENT
69 * - IXGBE_ERROR_UNSUPPORTED
170 #define IXGBE_BY_MAC(_hw, r) ((_hw)->mvals[IXGBE_CAT(r, _IDX)])
427 (0x012300 + (((_i) - 24) * 4)))
[all …]
|