/linux/Documentation/devicetree/bindings/gpu/host1x/ |
H A D | nvidia,tegra234-nvdec.yaml | 67 firmware secure carveout. This carveout is configured by the bootloader and 73 Offset to bootloader manifest from beginning of firmware that was configured by 74 the bootloader. 79 Offset to bootloader code section from beginning of firmware that was configured by 80 the bootloader. 85 Offset to bootloader data section from beginning of firmware that was configured by 86 the bootloader. 92 the bootloader. 98 the bootloader. 104 by the bootloader.
|
/linux/drivers/usb/typec/ucsi/ |
H A D | ucsi_stm32g0.c | 19 /* STM32G0 I2C bootloader addr: 0b1010001x (See AN2606) */ 22 /* STM32G0 I2C bootloader max data size */ 25 /* STM32 I2C bootloader commands (See AN4221) */ 26 #define STM32_CMD_GVR 0x01 /* Gets the bootloader version */ 35 /* STM32 I2C bootloader answer status */ 50 #define STM32G0_FW_RSTGOBL 0x21 /* Reset and go to bootloader */ 72 * Bootloader commands helpers: 103 /* The 'ack' byte should contain bootloader answer: ack/nack/busy */ in ucsi_stm32g0_bl_check_ack() 134 * Send STM32 bootloader command format is two bytes: in ucsi_stm32g0_bl_cmd_check_ack() 220 /* Bootloader commands */ [all …]
|
/linux/arch/m68k/include/asm/ |
H A D | bootstd.h | 2 /* bootstd.h: Bootloader system call interface 10 #define NR_BSC 21 /* last used bootloader system call */ 12 #define __BN_reset 0 /* reset and start the bootloader */ 14 #define __BN_exec 2 /* executes a bootloader image */ 15 #define __BN_exit 3 /* terminates a bootloader image */ 26 #define __BN_getbenv 14 /* get a bootloader envvar */ 27 #define __BN_setbenv 15 /* get a bootloader envvar */ 35 * We use similar macros to call into the bootloader as for uClinux
|
/linux/Documentation/devicetree/bindings/power/reset/ |
H A D | reboot-mode.yaml | 15 or ram. Then the bootloader can read it and take different 19 the bootloader what to do when the system reboots, and should be named 25 …- bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based devic… 26 - loader: A bootloader mode, it's a mode used to download image on Rockchip platform, 46 mode-bootloader = <2>;
|
/linux/arch/alpha/boot/ |
H A D | Makefile | 14 tools/bootpzh bootloader bootpheader bootpzheader 90 $(obj)/tools/lxboot: $(obj)/bootloader $(OBJSTRIP) FORCE 93 $(obj)/tools/bootlx: $(obj)/bootloader $(OBJSTRIP) FORCE 111 $(obj)/bootloader: $(obj)/bootloader.lds $(OBJ_bootlx) $(LIBS_Y) FORCE 114 $(obj)/bootpheader: $(obj)/bootloader.lds $(OBJ_bootph) $(LIBS_Y) FORCE 117 $(obj)/bootpzheader: $(obj)/bootloader.lds $(OBJ_bootpzh) $(LIBS_Y) FORCE
|
/linux/Documentation/devicetree/bindings/net/ |
H A D | ti,cc1352p7.yaml | 32 bootloader-backdoor-gpios: 35 gpios to enable bootloader backdoor in cc1352p7 bootloader to allow 55 bootloader-backdoor-gpios = <&pio 36 GPIO_ACTIVE_LOW>;
|
/linux/drivers/platform/x86/intel/wmi/ |
H A D | sbl-fw-update.c | 3 * Slim Bootloader(SBL) firmware update signaling driver 5 * Slim Bootloader is a small, open-source, non UEFI compliant, boot firmware 111 dev_info(&wdev->dev, "Slim Bootloader signaling driver attached\n"); in intel_wmi_sbl_fw_update_probe() 117 dev_info(&wdev->dev, "Slim Bootloader signaling driver removed\n"); in intel_wmi_sbl_fw_update_remove() 139 MODULE_DESCRIPTION("Slim Bootloader firmware update signaling driver");
|
/linux/drivers/media/pci/saa7164/ |
H A D | saa7164-fw.c | 261 "%s() Unknown bootloader flags 0x%x\n", in saa7164_downloadfirmware() 322 "%s() Unknown bootloader flags 0x%x\n", in saa7164_downloadfirmware() 433 /* Retrieve bootloader if reqd */ in saa7164_downloadfirmware() 435 /* Second bootloader in the firmware file */ in saa7164_downloadfirmware() 444 /* Get bootloader (if reqd) and firmware header */ in saa7164_downloadfirmware() 454 dprintk(DBGLVL_FW, "Onboard BootLoader:\n"); in saa7164_downloadfirmware() 467 dprintk(DBGLVL_FW, "BootLoader version in rom %d.%d.%d.%d\n", in saa7164_downloadfirmware() 473 dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n", in saa7164_downloadfirmware() 510 /* Get ready to upload the bootloader */ in saa7164_downloadfirmware() 518 dprintk(DBGLVL_FW, "bootloader d/l starts.\n"); in saa7164_downloadfirmware() [all …]
|
/linux/Documentation/devicetree/bindings/input/touchscreen/ |
H A D | cypress,cy8ctma340.yaml | 67 bootloader-key: 68 description: the 8-byte bootloader key that is required to switch 69 the chip from bootloader mode (default mode) to application mode 117 - bootloader-key 139 bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
|
/linux/arch/powerpc/boot/dts/ |
H A D | mpc8349emitxgp.dts | 34 timebase-frequency = <0>; // from bootloader 35 bus-frequency = <0>; // from bootloader 36 clock-frequency = <0>; // from bootloader 52 bus-frequency = <0>; // from bootloader 189 clock-frequency = <0>; // from bootloader 199 clock-frequency = <0>; // from bootloader
|
H A D | tqm5200.dts | 29 timebase-frequency = <0>; // from bootloader 30 bus-frequency = <0>; // from bootloader 31 clock-frequency = <0>; // from bootloader 46 bus-frequency = <0>; // from bootloader 47 system-frequency = <0>; // from bootloader
|
H A D | charon.dts | 32 timebase-frequency = <0>; // from bootloader 33 bus-frequency = <0>; // from bootloader 34 clock-frequency = <0>; // from bootloader 49 bus-frequency = <0>; // from bootloader 50 system-frequency = <0>; // from bootloader
|
/linux/Documentation/devicetree/bindings/nvmem/ |
H A D | rmem.yaml | 19 - mobileye,eyeq5-bootloader-config 20 - raspberrypi,bootloader-config 21 - raspberrypi,bootloader-public-key 46 compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
|
/linux/arch/arm/mach-omap1/ |
H A D | Kconfig | 44 Pin multiplexing support for OMAP boards. If your bootloader 57 bool "Warn about pins the bootloader didn't set up" 127 need a PalmOS compatible bootloader; check out 137 you'll need a SX1 compatible bootloader; check out
|
/linux/drivers/net/can/usb/etas_es58x/ |
H A D | es58x_devlink.c | 26 * bootloader version. 28 * The @prod_info string contains the firmware and the bootloader 30 * other numbers. Depending on the device, the firmware (bootloader) 125 * firmware version, the bootloader version and the hardware 168 * @sw_ver: Version number of either the firmware or the bootloader. 205 * Report the firmware version, the bootloader version, the hardware
|
/linux/arch/mips/cavium-octeon/ |
H A D | octeon_boot.h | 24 /* similar to bootloader's linux_app_boot_info but without global data */ 63 /* If not to copy a lot of bootloader's structures 67 /* hardcoded in bootloader */
|
/linux/Documentation/devicetree/bindings/remoteproc/ |
H A D | st-rproc.txt | 6 Co-processors can be controlled from the bootloader or the primary OS. If 7 the bootloader starts a co-processor, the primary OS must detect its state 18 - clock-frequency Clock frequency to set co-processor at if the bootloader
|
/linux/drivers/memory/ |
H A D | Kconfig | 118 Enables verbose debugging mostly to decode the bootloader provided 119 timings. To preserve the bootloader provided timings, the reset 123 NOTE: In addition to matching the register setup with the bootloader 125 bootloader or else the GPMC timings won't be identical with the 126 bootloader timings.
|
/linux/drivers/hid/ |
H A D | hid-picolcd.h | 41 #define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */ 42 #define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */ 43 #define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */ 44 #define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */ 45 #define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */ 48 #define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */
|
/linux/arch/mips/include/asm/octeon/ |
H A D | cvmx-sysinfo.h | 29 * This module provides system/board information obtained by the bootloader. 71 /* exception base address, as set by bootloader */ 107 /* configuration flags from bootloader */ 116 * by the bootloader.
|
H A D | cvmx-bootmem.h | 52 * which is used to maintain the free memory list. Since the bootloader is 60 * bootloader, so this structure should not be changed 150 * passed to the application by the bootloader at a specific 176 * to the application by the bootloader, and assign it a name in the 191 * that was passed to the application by the bootloader, and assign it 211 * free list that was passed to the application by the bootloader, and
|
/linux/Documentation/translations/zh_TW/arch/arm/ |
H A D | Booting | 97 bootloader 必須創建和初始化內核標籤列表。一個有效的標籤列表以 106 bootloader 必須傳遞一個系統內存的位置和最小值,以及根文件系統位置。 125 bootloader 必須以 64bit 地址對齊的形式加載一個設備樹映像(dtb)到系統 131 bootloader 必須傳遞一個系統內存的位置和最小值,以及根文件系統位置。
|
/linux/Documentation/translations/zh_CN/arch/arm/ |
H A D | Booting | 97 bootloader 必须创建和初始化内核标签列表。一个有效的标签列表以 106 bootloader 必须传递一个系统内存的位置和最小值,以及根文件系统位置。 125 bootloader 必须以 64bit 地址对齐的形式加载一个设备树映像(dtb)到系统 131 bootloader 必须传递一个系统内存的位置和最小值,以及根文件系统位置。
|
/linux/arch/mips/loongson64/ |
H A D | reset.c | 61 char *str, *ptr, *bootloader = "kexec"; in loongson_kexec_prepare() local 72 if (!strncmp(bootloader, (char *)image->segment[i].buf, in loongson_kexec_prepare() 73 strlen(bootloader))) { in loongson_kexec_prepare() 76 * of parameters (as bootloader does). in loongson_kexec_prepare()
|
/linux/drivers/greybus/ |
H A D | gb-beagleplay.c | 65 * @fwl_cmd_response_com: completion to signal a bootloader command response 66 * @fwl_cmd_response: bootloader command response data 124 * enum cc1352_bootloader_cmd: CC1352 Bootloader Commands 135 * CC1352 Bootloader serial bus commands 147 * enum cc1352_bootloader_status: CC1352 Bootloader COMMAND_GET_STATUS response 165 * struct cc1352_bootloader_packet: CC1352 Bootloader Request Packet 169 * @cmd: bootloader command 181 * struct cc1352_bootloader_download_cmd_data: CC1352 Bootloader COMMAND_DOWNLOAD request data 192 * struct cc1352_bootloader_crc32_cmd_data: CC1352 Bootloader COMMAND_CRC32 request data 468 * cc1352_bootloader_pkt_rx: Process a CC1352 Bootloader Packet [all …]
|