History log of /linux/drivers/memory/Kconfig (Results 1 – 25 of 70)
Revision Date Author Comments
# d455e0f6 25-Feb-2026 Andy Shevchenko <andriy.shevchenko@linux.intel.com>

memory: bt1-l2-ctl: Remove not-going-to-be-supported code for Baikal SoC

As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.

Link:

memory: bt1-l2-ctl: Remove not-going-to-be-supported code for Baikal SoC

As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.

Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260225173930.3819351-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...


# 8181d061 28-Apr-2025 Patrice Chotard <patrice.chotard@foss.st.com>

memory: Add STM32 Octo Memory Manager driver

Octo Memory Manager driver (OMM) manages:
- the muxing between 2 OSPI busses and 2 output ports.
There are 4 possible muxing configurations:

memory: Add STM32 Octo Memory Manager driver

Octo Memory Manager driver (OMM) manages:
- the muxing between 2 OSPI busses and 2 output ports.
There are 4 possible muxing configurations:
- direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
output is on port 2
- OSPI1 and OSPI2 are multiplexed over the same output port 1
- swapped mode (no multiplexing), OSPI1 output is on port 2,
OSPI2 output is on port 1
- OSPI1 and OSPI2 are multiplexed over the same output port 2
- the split of the memory area shared between the 2 OSPI instances.
- chip select selection override.
- the time between 2 transactions in multiplexed mode.
- check firewall access.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20250428-upstream_ospi_v6-v11-2-1548736fd9d2@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# 0c16b8fd 04-Apr-2025 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

memory: Simplify 'default' choice in Kconfig

'default y if FOO' can be written shorter (and it already is in other
places).

Link: https://lore.kernel.org/r/20250404111703.235455-1-krzysztof.kozlows

memory: Simplify 'default' choice in Kconfig

'default y if FOO' can be written shorter (and it already is in other
places).

Link: https://lore.kernel.org/r/20250404111703.235455-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# 9ba0cae3 30-May-2024 Esben Haabendal <esben@geanix.com>

memory: fsl_ifc: Make FSL_IFC config visible and selectable

While use of fsl_ifc driver with NAND flash is fine, as the fsl_ifc_nand
driver selects FSL_IFC automatically, we need the CONFIG_FSL_IFC

memory: fsl_ifc: Make FSL_IFC config visible and selectable

While use of fsl_ifc driver with NAND flash is fine, as the fsl_ifc_nand
driver selects FSL_IFC automatically, we need the CONFIG_FSL_IFC option to
be selectable for platforms using fsl_ifc with NOR flash.

Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240530-fsl-ifc-config-v3-1-1fd2c3d233dd@geanix.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# d3369a4b 16-May-2023 Claudiu Beznea <claudiu.beznea@microchip.com>

memory: atmel-sdramc: remove the driver

Driver does only clock request + enable for DDR clocks. DDR clocks are
enabled by bootloader and need to stay that way in Linux. To avoid having
these clocks

memory: atmel-sdramc: remove the driver

Driver does only clock request + enable for DDR clocks. DDR clocks are
enabled by bootloader and need to stay that way in Linux. To avoid having
these clocks disabled by clock subsystem in case there are no Linux
consumers for them the clocks were marked as critical in clock drivers
(in commit 68b3b6f1773d ("clk: at91: mark ddr clocks as critical")).
With this, there is no need to have a separate driver that only does
clock request + enable.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230516072405.2696225-1-claudiu.beznea@microchip.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# 20c082a2 24-Mar-2023 Christophe Kerello <christophe.kerello@foss.st.com>

memory: stm32-fmc2-ebi: depends on ARCH_STM32 instead of MACH_STM32MP157

To be able to compile the driver on all STM32MP SOCs, we move the
"depends on" on ARCH_STM32.

Signed-off-by: Christophe Kere

memory: stm32-fmc2-ebi: depends on ARCH_STM32 instead of MACH_STM32MP157

To be able to compile the driver on all STM32MP SOCs, we move the
"depends on" on ARCH_STM32.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20230324155105.826063-2-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# a4be90ff 13-Aug-2022 Florian Fainelli <f.fainelli@gmail.com>

memory: brcmstb_memc: Add Broadcom STB memory controller driver

Add support for configuring the Self Refresh Power Down (SRPD)
inactivity timeout on Broadcom STB chips. This is used to conserve powe

memory: brcmstb_memc: Add Broadcom STB memory controller driver

Add support for configuring the Self Refresh Power Down (SRPD)
inactivity timeout on Broadcom STB chips. This is used to conserve power
when the DRAM activity is reduced.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-4-f.fainelli@gmail.com

show more ...


# 67c7fc6c 10-May-2022 Geert Uytterhoeven <geert+renesas@glider.be>

memory: omap-gpmc: OMAP_GPMC should depend on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3

The Texas Instruments OMAP General Purpose Memory Controller (GPMC) is
only present on TI OMAP2/3/4/5, Keysto

memory: omap-gpmc: OMAP_GPMC should depend on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3

The Texas Instruments OMAP General Purpose Memory Controller (GPMC) is
only present on TI OMAP2/3/4/5, Keystone, AM33xx, AM43x, DRA7xx, TI81xx,
and K3 SoCs. Hence add a dependency on ARCH_OMAP2PLUS || ARCH_KEYSTONE
|| ARCH_K3, to prevent asking the user about this driver when
configuring a kernel without OMAP2+, Keystone, or K3 SoC family support.

Fixes: be34f45f0d4aa91c ("memory: omap-gpmc: Make OMAP_GPMC config visible and selectable")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/f6780f572f882ed6ab5934321942cf2b412bf8d1.1652174849.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# 854fd920 26-Apr-2022 Roger Quadros <rogerq@kernel.org>

memory: omap-gpmc: Allow building as a module

Allow OMAP_GPMC to be built as a module.

When building this driver as a module, the symbol
'of_default_bus_match_table' will not be found as it is not

memory: omap-gpmc: Allow building as a module

Allow OMAP_GPMC to be built as a module.

When building this driver as a module, the symbol
'of_default_bus_match_table' will not be found as it is not being
exported.

The of_match_node() call is redundant anyways as
of_platform_default_populate() already takes care of matching with
'of_default_bus_match_table'. So get rid of that call. This will also
resolve the module build failure.

Move compatible match table to the end where it is usually expected.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20220426082611.24427-3-rogerq@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# be34f45f 26-Apr-2022 Roger Quadros <rogerq@kernel.org>

memory: omap-gpmc: Make OMAP_GPMC config visible and selectable

So far for armv7 TI platforms, GPMC was being selected by
arch/arm/mach-* architecture Kconfig files.

For K3 platforms, GPMC is no lo

memory: omap-gpmc: Make OMAP_GPMC config visible and selectable

So far for armv7 TI platforms, GPMC was being selected by
arch/arm/mach-* architecture Kconfig files.

For K3 platforms, GPMC is no longer required for basic boot and cannot
be always enabled by default by mach- Kconfig.

We need a way for user (or board defconfig) to enable it if required so
make OMAP_GPMC Kconfig option always visible.

Drop COMPILE_TEST as build fails if IRQ_DOMAIN is not enabled.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20220426082611.24427-2-rogerq@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...


# d611d7ea 10-Oct-2021 Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Merge branch 'for-v5.16/renesas-rpc' into mem-ctrl-next


# 4a26df8e 05-Oct-2021 Geert Uytterhoeven <geert+renesas@glider.be>

memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER

The Renesas RPC-IF driver calls devm_reset_control_get_exclusive(),
which returns -ENOTSUPP if CONFIG_RESET_CONTROLLER is not ena

memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER

The Renesas RPC-IF driver calls devm_reset_control_get_exclusive(),
which returns -ENOTSUPP if CONFIG_RESET_CONTROLLER is not enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/e443aa66d146da5646b7ebece8876545b8621063.1633447756.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

show more ...


# 13f995ce 24-Sep-2021 Florian Fainelli <f.fainelli@gmail.com>

memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module

Allow building the Broadcom STB DPFE driver as a module, it is already a
platform driver proper with all of the resource releasing de

memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module

Allow building the Broadcom STB DPFE driver as a module, it is already a
platform driver proper with all of the resource releasing device
managed.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Link: https://lore.kernel.org/r/20210924031459.8911-1-f.fainelli@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

show more ...


# e229b429 24-Feb-2021 Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subs

Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.

Included in here are:

- coresight driver updates

- habannalabs driver updates

- virtual acrn driver addition (proper acks from the x86 maintainers)

- broadcom misc driver addition

- speakup driver updates

- soundwire driver updates

- fpga driver updates

- amba driver updates

- mei driver updates

- vfio driver updates

- greybus driver updates

- nvmeem driver updates

- phy driver updates

- mhi driver updates

- interconnect driver udpates

- fsl-mc bus driver updates

- random driver fix

- some small misc driver updates (rtsx, pvpanic, etc.)

All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"

* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...

show more ...


# 50fc8d92 26-Jan-2021 Yong Wu <yong.wu@mediatek.com>

memory: mtk-smi: Allow building as module

Add support for building the SMI driver as module. Switch MTK_SMI to
tristate, and add module_exit/module_license.

Signed-off-by: Yong Wu <yong.wu@mediatek

memory: mtk-smi: Allow building as module

Add support for building the SMI driver as module. Switch MTK_SMI to
tristate, and add module_exit/module_license.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210126060055.11050-1-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...


# 477dfdcc 07-Jan-2021 Xu Yilun <yilun.xu@intel.com>

memory: dfl-emif: add the DFL EMIF private feature driver

This driver is for the EMIF private feature implemented under FPGA
Device Feature List (DFL) framework. It is used to expose memory
interfac

memory: dfl-emif: add the DFL EMIF private feature driver

This driver is for the EMIF private feature implemented under FPGA
Device Feature List (DFL) framework. It is used to expose memory
interface status information as well as memory clearing control.

The purpose of memory clearing block is to zero out all private memory
when FPGA is to be reprogrammed. This gives users a reliable method to
prevent potential data leakage.

[mdf@kernel.org: Fixed up ABI doc]

Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20210107043714.991646-9-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...


# 409f9fe9 02-Jan-2021 Adam Ford <aford173@gmail.com>

memory: renesas-rpc-if: Add RZ/G2 to Kconfig description

The Renesas RPC-IF is present on the RZ/G2 Series. Add that to
the description.

Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-

memory: renesas-rpc-if: Add RZ/G2 to Kconfig description

The Renesas RPC-IF is present on the RZ/G2 Series. Add that to
the description.

Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210102115412.3402059-2-aford173@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...


# d77d22d7 04-Dec-2020 Arnd Bergmann <arnd@arndb.de>

memory: ti-emif-sram: only build for ARMv7

The driver can be compile-tested on all ARM machines, but
causes a failure when built for ARMv7-M:

arm-linux-gnueabi-ld: error: drivers/memory/ti-emif-sra

memory: ti-emif-sram: only build for ARMv7

The driver can be compile-tested on all ARM machines, but
causes a failure when built for ARMv7-M:

arm-linux-gnueabi-ld: error: drivers/memory/ti-emif-sram-pm.o: conflicting architecture profiles A/M

Limit the target machines to configurations that have ARMv7 enabled.

Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203230832.1481767-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...


# 5445a0c0 29-Oct-2020 Krzysztof Kozlowski <krzk@kernel.org>

memory: pl353-smc: fix compile test on !ARM_AMBA

The pl353-smc driver uses module_amba_driver so it has a build
dependency on CONFIG_ARM_AMBA:

/usr/bin/arm-linux-gnueabi-ld: drivers/memory/pl35

memory: pl353-smc: fix compile test on !ARM_AMBA

The pl353-smc driver uses module_amba_driver so it has a build
dependency on CONFIG_ARM_AMBA:

/usr/bin/arm-linux-gnueabi-ld: drivers/memory/pl353-smc.o: in function `pl353_smc_driver_init':
pl353-smc.c:(.init.text+0x10): undefined reference to `amba_driver_register'

However it still can be compile tested on platforms other than ARM,
which in practice is limited to those selecting ARM_AMBA (so only
ARM64).

Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20201029193357.389593-1-krzk@kernel.org

show more ...


# 26cb1d2f 11-Sep-2020 Krzysztof Kozlowski <krzk@kernel.org>

memory: omap-gpmc: Fix compile test on SPARC

SPARC comes without CONFIG_OF_ADDRESS thus compile testing fails on
linking:

/usr/bin/sparc64-linux-gnu-ld: drivers/memory/omap-gpmc.o: in function `g

memory: omap-gpmc: Fix compile test on SPARC

SPARC comes without CONFIG_OF_ADDRESS thus compile testing fails on
linking:

/usr/bin/sparc64-linux-gnu-ld: drivers/memory/omap-gpmc.o: in function `gpmc_probe_generic_child':
omap-gpmc.c:(.text.unlikely+0x14ec): undefined reference to `of_platform_device_create'

Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200911143251.399-1-krzk@kernel.org

show more ...


# ea0c0ad6 24-Jul-2020 Krzysztof Kozlowski <krzk@kernel.org>

memory: Enable compile testing for most of the drivers

Most of the memory controller drivers do not depend on architecture
specific code so can be compile tested to increase build coverage.

When co

memory: Enable compile testing for most of the drivers

Most of the memory controller drivers do not depend on architecture
specific code so can be compile tested to increase build coverage.

When compile tested, do not enable them by default.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200724074038.5597-7-krzk@kernel.org

show more ...


# 904ffa81 24-Jul-2020 Krzysztof Kozlowski <krzk@kernel.org>

memory: brcmstb_dpfe: add separate entry for compile test

Add separate entry for Broadcom STB DPFE driver, enabled by default on
ARCH_BRCMSTB. This allows compile testing.

Signed-off-by: Krzysztof

memory: brcmstb_dpfe: add separate entry for compile test

Add separate entry for Broadcom STB DPFE driver, enabled by default on
ARCH_BRCMSTB. This allows compile testing.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...


# dec1fbbc 09-Aug-2020 Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Spelling
- http to https updates

NAND core chan

Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Spelling
- http to https updates

NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection

Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion

Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
TC58NVG0S3E, and TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

SPI NOR core changes:
- Disable Quad Mode in spi_nor_restore().
- Don't abort BFPT parsing when QER reserved value is used.
- Add support/update capabilities for few flashes.
- Drop s70fl01gs flash: it does not support RDSR(05h) which is
critical for erase/write.
- Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
the release cycle.

SPI NOR controller drivers changes:
- Move the cadence-quadspi driver to spi-mem. The series was taken
through the SPI tree. Merge it also in spi-nor/next to avoid
conflicts during the release cycle.
- intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't support
it.
- Fix performance regression"

* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
MTD: pfow.h: drop a duplicated word
MTD: mtd-abi.h: drop a duplicated word
mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
mtd: Replace HTTP links with HTTPS ones
mtd: hyperbus: Replace HTTP links with HTTPS ones
mtd: revert "spi-nor: intel: provide a range for poll_timout"
mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
mtd: spi-nor: macronix: Add support for mx66u2g45g
mtd: spi-nor: intel-spi: Simulate WRDI command
mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
mtd: spi-nor: Add capability to disable flash quad mode
mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
mtd: spi-nor: sfdp: do not make invalid quad enable fatal
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
mtd: rawnand: stm32_fmc2: get resources from parent node
mtd: rawnand: stm32_fmc2: use regmap APIs
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
...

show more ...


# b62e4197 06-Aug-2020 Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS upates from Thomas Bogendoerfer:

- improvements for Loongson64

- extended ingenic support

- removal o

Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS upates from Thomas Bogendoerfer:

- improvements for Loongson64

- extended ingenic support

- removal of not maintained paravirt system type

- cleanups and fixes

* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits)
MIPS: SGI-IP27: always enable NUMA in Kconfig
MAINTAINERS: Update KVM/MIPS maintainers
MIPS: Update default config file for Loongson-3
MIPS: KVM: Add kvm guest support for Loongson-3
dt-bindings: mips: Document Loongson kvm guest board
MIPS: handle Loongson-specific GSExc exception
MIPS: add definitions for Loongson-specific CP0.Diag1 register
MIPS: only register FTLBPar exception handler for supported models
MIPS: ingenic: Hardcode mem size for qi,lb60 board
MIPS: DTS: ingenic/qi,lb60: Add model and memory node
MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB
MIPS: head.S: Init fw_passed_dtb to builtin DTB
of: address: Fix parser address/size cells initialization
of_address: Guard of_bus_pci_get_flags with CONFIG_PCI
MIPS: DTS: Fix number of msi vectors for Loongson64G
MIPS: Loongson64: Add ISA node for LS7A PCH
MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH
MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
MIPS: Loongson64: Process ISA Node in DeviceTree
of_address: Add bus type match for pci ranges parser
...

show more ...


# b1713739 04-Aug-2020 Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, nothing really going on in the core
although t

Merge tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, nothing really going on in the core
although there's been quite a bit of driver related activity.

This includes the addition of some shared code in drivers/memory for
the Renesas RPC-IF which is used by a newly added SPI driver, the
memory subsystem doesn't seem to have a fixed maintainer at the minute
and this seemed like the most sensible way to get that hardware
supported.

- Quite a few cleanups and optimizations for the Altera, Qualcomm
GENI, sun6i and lantiq drivers.

- Several more GPIO descriptor conversions.

- Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi.

- New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and
R8A774e1"

* tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
dt-bindings: lpspi: New property in document DT bindings for LPSPI
spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK
spi: lpspi: remove unused fsl_lpspi->chipselect
spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register
spi: rockchip: Fix error in SPI slave pio read
spi: rockchip: Support 64-location deep FIFOs
spi: rockchip: Config spi rx dma burst size depend on xfer length
spi: spi-topcliff-pch: drop call to wakeup-disable
spi: spidev: Align buffers for DMA
spi: correct kernel-doc inconsistency
spi: sun4i: update max transfer size reported
spi: imx: enable runtime pm support
spi: update bindings for MT8192 SoC
spi: mediatek: add spi support for mt8192 IC
spi: Add bindings for Lightning Mountain SoC
spi: lantiq: Add support to Lightning Mountain SoC
spi: lantiq: Move interrupt configuration to SoC specific data structure
spi: lantiq: Add fifo size bit mask in SoC specific data structure
spi: lantiq: Add support to acknowledge interrupt
spi: lantiq: Move interrupt control register offesets to SoC specific data structure
...

show more ...


123