Home
last modified time | relevance | path

Searched +full:1000 +full:mbps (Results 1 – 25 of 140) sorted by relevance

123456

/freebsd/sys/contrib/ncsw/inc/flib/
H A Dfsl_enet.h58 E_ENET_SPEED_10 = 10, /**< 10 Mbps */
59 E_ENET_SPEED_100 = 100, /**< 100 Mbps */
60 E_ENET_SPEED_1000 = 1000, /**< 1000 Mbps = 1 Gbps */
61 E_ENET_SPEED_2500 = 2500, /**< 2500 Mbps = 2.5 Gbps */
62 E_ENET_SPEED_10000 = 10000 /**< 10000 Mbps = 10 Gbps */
177 /**< SGMII/QSGII interface with 1000BaseX auto-negotiation between MAC
179 Note: 1000BaseX auto-negotiation relates only to interface between MAC
181 10Mbps, 100Mbps or 1000Mbps */
187 /**< 10 Mbps MII */
189 /**< 100 Mbps MII */
[all …]
/freebsd/sys/contrib/ncsw/inc/
H A Denet_ext.h82 #define ENET_IF_SGMII_BASEX 0x80000000 /**< SGMII/QSGII interface with 1000BaseX
85 Note: 1000BaseX auto-negotiation relates
88 at 10Mbps, 100Mbps or 1000Mbps */
104 e_ENET_SPEED_10 = E_ENET_SPEED_10, /**< 10 Mbps */
105 e_ENET_SPEED_100 = E_ENET_SPEED_100, /**< 100 Mbps */
106 e_ENET_SPEED_1000 = E_ENET_SPEED_1000, /**< 1000 Mbps = 1 Gbps */
107 e_ENET_SPEED_2500 = E_ENET_SPEED_2500, /**< 2500 Mbps = 2.5 Gbps */
108 e_ENET_SPEED_10000 = E_ENET_SPEED_10000 /**< 10000 Mbps = 10 Gbps */
117 … e_ENET_MODE_MII_10 = (e_ENET_IF_MII | e_ENET_SPEED_10), /**< 10 Mbps MII */
118 … e_ENET_MODE_MII_100 = (e_ENET_IF_MII | e_ENET_SPEED_100), /**< 100 Mbps MII */
[all …]
/freebsd/sys/net/
H A Dif_media.h150 #define IFM_1000_SX 11 /* 1000BaseSX - multi-mode fiber */
153 #define IFM_1000_LX 14 /* 1000baseLX - single-mode fiber */
154 #define IFM_1000_CX 15 /* 1000baseCX - 150ohm STP */
155 #define IFM_1000_T 16 /* 1000baseT - 4 pair cat 5 */
169 #define IFM_1000_KX 30 /* 1000Base-KX backplane */
185 #define IFM_1000_CX_SGMII IFM_X(44) /* 1000Base-CX-SGMII */
262 #define IFM_1000_BX IFM_X(121) /* 1000Base-BX */
271 #define IFM_ETH_MASTER 0x00000100 /* master mode (1000baseT) */
282 #define IFM_IEEE80211_FH1 3 /* Frequency Hopping 1Mbps */
283 #define IFM_IEEE80211_FH2 4 /* Frequency Hopping 2Mbps */
[all …]
/freebsd/share/man/man4/
H A Dure.461 NICs based on the RTL8152 are capable of 10 and 100Mbps.
64 are capable of 10, 100, and 1000Mbps.
65 NICs based on the RTL8156 are capable of 10, 100, 1000, and 2500Mbps operation.
78 Set 10Mbps operation.
87 Set 100Mbps (Fast Ethernet) operation.
95 .It Cm 1000baseTX
96 Set 1000baseTX (Gigabit Ethernet) operation over twisted pair.
97 The RealTek gigE chips support 1000Mbps in
102 The RealTek 8156/8156B chips support 2500Mbps in
H A Dbge.460 All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5
62 1000Mbps over multimode fiber.
73 transceivers, which means it can be used with either copper or 1000baseX
78 Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
80 which support autonegotiation of 10, 100 and 1000Mbps modes in
102 Set 10Mbps operation.
112 Set 100Mbps (Fast Ethernet) operation.
121 .It Cm 1000baseTX
122 Set 1000baseTX operation over twisted pair.
126 .It Cm 1000baseSX
[all …]
H A Dre.459 NICs based on the 8139C+ and 810xE are capable of 10 and 100Mbps speeds
62 and 1000Mbps operation.
72 The 8169 is a 10/100/1000 MAC only, requiring a GMII or TBI external PHY.
74 10/100/1000 MAC and 10/100/1000 copper PHY.
75 Standalone 10/100/1000 cards are available
97 Set 10Mbps operation.
107 Set 100Mbps (Fast Ethernet) operation.
116 .It Cm 1000baseTX
117 Set 1000baseTX operation over twisted pair.
118 The RealTek gigE chips support 1000Mbps in
[all …]
H A Dnge.460 transceivers, which means it can be used with either copper or 1000baseX
66 Most cards also use the DP83861 10/100/1000 copper gigabit transceiver
67 chip, which supports autonegotiation of 10, 100 and 1000Mbps modes in
88 Set 10Mbps operation.
98 Set 100Mbps (Fast Ethernet) operation.
107 .It Cm 1000baseTX
108 Set 1000baseTX operation over twisted pair.
113 .It Cm 1000baseSX
114 Set 1000Mbps (Gigabit Ethernet) operation.
146 Asante FriendlyNet GigaNIX 1000TA and 1000TPC
[all …]
H A Dstge.469 copper or 1000baseX fiber applications.
87 Set 10Mbps operation.
97 Set 100Mbps (Fast Ethernet) operation.
106 .It Cm 1000baseTX
107 Set 1000baseTX operation over twisted pair.
108 The Sundance/Tamarack supports 1000Mbps in
111 .\" .It Cm 1000baseSX
112 .\" Set 1000Mbps (Gigabit Ethernet) operation.
H A Dem.442 .Nd "Intel(R) PRO/1000 Gigabit Ethernet adapter driver"
100 documentation supplied with your Intel PRO/1000 adapter.
118 Sets 10Mbps operation.
125 Sets 100Mbps operation.
131 .It Cm 1000baseSX
132 Sets 1000Mbps operation.
136 .It Cm 1000baseTX
137 Sets 1000Mbps operation.
184 Intel PRO/1000 CT Network Connection (82547)
186 Intel PRO/1000 F Server Adapter (82543)
[all …]
H A Dti.474 While the Tigon chipset supports 10, 100 and 1000Mbps speeds, support for
75 10 and 100Mbps speeds is only available on boards with the proper
77 Most adapters are only designed to work at 1000Mbps,
126 Set 10Mbps operation.
135 Set 100Mbps (Fast Ethernet) operation.
143 .It 1000baseSX
144 Set 1000Mbps (Gigabit Ethernet) operation.
177 Alteon AceNIC V Gigabit Ethernet adapter (1000baseSX)
179 Alteon AceNIC V Gigabit Ethernet adapter (1000baseT)
181 Digital EtherWORKS 1000SX PCI Gigabit adapter
[all …]
H A Dbce.472 10/100/1000Mbps operation in full-duplex mode
74 10/100Mbps operation in half-duplex mode
87 Set 10Mbps operation.
97 Set 100Mbps (Fast Ethernet) operation.
106 .It Cm 1000baseSX
107 Sets 1000Mbps operation.
111 .It Cm 1000baseT
112 Set 1000baseT operation over twisted pair.
117 Set 2500Mbps operation.
144 QLogic NetXtreme II BCM5706 1000Base-SX
[all …]
H A Daxe.467 The AX88178 has a 10/100/1000 Ethernet MAC with GMII/RGMII interface
73 maximum transfer speed of 12Mbps.
75 achieve 100Mbps speeds with these devices.
92 Set 10Mbps operation.
102 Set 100Mbps (Fast Ethernet) operation.
111 .It Cm 1000baseT
112 Set 1000Mbps (Gigabit Ethernet) operation (AX88178 only).
H A Dgenet.453 10/100/1000Mbps operation in full-duplex mode
55 10/100Mbps operation in half-duplex mode
72 Set 10Mbps operation.
82 Set 100Mbps (Fast Ethernet) operation.
91 .It Cm 1000baseT
92 Set 1000baseT operation over twisted pair.
H A Digc.453 Sets 10Mbps operation.
60 Sets 100Mbps operation.
66 .It Cm 1000baseT
67 Sets 1000Mbps operation.
72 Sets 2500Mbps operation.
H A Daxge.464 The AX88179, AX88179A and AX88178A contain a 10/100/1000 Ethernet MAC with a
81 Set 10Mbps operation.
91 Set 100Mbps (Fast Ethernet) operation.
100 .It Cm 1000baseT
101 Set 1000Mbps (Gigabit Ethernet) operation (AX88178 only).
H A Dmsk.460 1000baseX fiber applications.
78 Set 10Mbps operation.
88 Set 100Mbps (Fast Ethernet) operation.
97 .It Cm 1000baseTX
98 Set 1000baseTX operation over twisted pair.
107 .It Cm 1000baseSX
108 Set 1000Mbps (Gigabit Ethernet) operation.
H A Det.477 Set 10Mbps operation.
87 Set 100Mbps (Fast Ethernet) operation.
96 .It 1000baseT
97 Set 1000Mbps (Gigabit Ethernet) operation.
119 Note that the 1000baseT media type is only available
H A Dnfe.474 Set 10Mbps operation.
76 Set 100Mbps (Fast Ethernet) operation.
77 .It Cm 1000baseT
78 Set 1000Mbps (Gigabit Ethernet) operation (recent models only).
/freebsd/sys/dev/mii/
H A Drgephyreg.h59 #define RGEPHY_S1000 RGEPHY_BMCR_SPD1 /* 1000mbps */
61 #define RGEPHY_S10 0 /* 10mbps */
117 #define RGEPHY_MII_1000CTL 0x09 /* 1000baseT control */
130 #define RGEPHY_MII_1000STS 0x0A /* 1000baseT status */
140 #define RGEPHY_EXTSTS_X_FD_CAP 0x8000 /* 1000base-X FD capable */
141 #define RGEPHY_EXTSTS_X_HD_CAP 0x4000 /* 1000base-X HD capable */
142 #define RGEPHY_EXTSTS_T_FD_CAP 0x2000 /* 1000base-T FD capable */
143 #define RGEPHY_EXTSTS_T_HD_CAP 0x1000 /* 1000base-T HD capable */
158 #define RGEPHY_SSR_S1000 0x8000 /* 1000Mbps */
159 #define RGEPHY_SSR_S100 0x4000 /* 100Mbps */
[all …]
/freebsd/sys/contrib/device-tree/Bindings/phy/
H A Dphy-ocelot-serdes.txt12 There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
13 half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
14 10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
H A Dmscc,vsc7514-serdes.yaml22 There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
23 half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
24 10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
H A Dmicrochip,sparx5-serdes.yaml34 * 100 Mbps (100BASE-FX)
35 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
44 * 100 Mbps (100BASE-FX)
45 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
57 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
/freebsd/sys/dev/e1000/
H A DREADME154 10baseT/UTP Sets speed to 10 Mbps. Use the ifconfig mediaopt
156 100baseTX Sets speed to 100 Mbps. Use the ifconfig mediaopt
158 1000baseTX Sets speed to 1000 Mbps. In this case, the driver
160 1000baseSX Sets speed to 1000 Mbps. In this case, the driver
184 NOTE: Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
196 Intel(R) PRO/1000 PT Server Adapter
197 Intel(R) PRO/1000 PT Desktop Adapter
198 Intel(R) PRO/1000 PT Network Connection
199 Intel(R) PRO/1000 PT Dual Port Server Adapter
200 Intel(R) PRO/1000 PT Dual Port Network Connection
[all …]
/freebsd/sys/netinet/
H A Dtcp_ratelimit.c72 * 1Mbps? Why do we have a rate at 1.44Mbps called common?
73 * Why do the rates cluster in the 1-100Mbps range more
112 * rate 31Mbps. 31Mbps means that each send that is done
141 * If we are above (b/w wise) over 100Mbps we double the result
142 * of the MSS calculation. The second caveat is if we are 500Mbps
151 122500, /* 1Mbps - rate 1 */
153 375000, /* 3Mbps - rate 3 */
154 625000, /* 5Mbps - rate 4 */
155 1250000, /* 10Mbps - rate 5 */
156 1875000, /* 15Mbps - rate 6 */
[all …]
/freebsd/sys/contrib/device-tree/Bindings/net/
H A Dmotorcomm,yt8xxx.yaml98 Transmit PHY Clock delay train configuration when speed is 10Mbps.
104 Transmit PHY Clock delay train configuration when speed is 100Mbps.
107 motorcomm,tx-clk-1000-inverted:
110 Transmit PHY Clock delay train configuration when speed is 1000Mbps.

123456