Remove $FreeBSD$: two-line nroff pattern

Remove /^\.\\"\n\.\\"\s*\$FreeBSD\$$\n/

re.4: Mention vendor driver for if_re(4)

If this if_re(4) is causing problems then an updated driver from
the vendor can be found in the ports tree under net/realtek-re-kmod.

Reviewed by: debdrup,

re.4: Mention vendor driver for if_re(4)

If this if_re(4) is causing problems then an updated driver from
the vendor can be found in the ports tree under net/realtek-re-kmod.

Reviewed by: debdrup, koobs, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D33677

show more ...

update external URL

Merge ^/head r305892 through r306302.

Add support for the TP-Link TG-3468 v2.

This is an RTL8168 chip, which we already support so all we have to do is add
the vendor ID.

PR: 212876
Submitted by: Tobias Kortkamp <t@tobik.me>
MFC after:

Add support for the TP-Link TG-3468 v2.

This is an RTL8168 chip, which we already support so all we have to do is add
the vendor ID.

PR: 212876
Submitted by: Tobias Kortkamp <t@tobik.me>
MFC after: 3 days

show more ...

IFC @r269962

Submitted by: Anish Gupta (akgupt3@gmail.com)

Merge head from 7/28

Sync to HEAD@r269943.

use .Mt to mark up email addresses consistently (final part)

PR: 191174
Submitted by: Franco Fichtner <franco at lastsummer.de>

Document newly added tunables.
hw.re.intr_filter
hw.re.msix_disable
dev.re.%d.int_rx_mod

Fix my fix to nfe.4, and also fix re.4

So just when I thought my pointy hat collection was going down ...

Add a manual page for rgephy(4) and reference it as appropriate. The
motivation for having rgephy.4 is to document the special media option
add in r217415.

MFC after: 3 days

Sync: merge r215944 through r216132 from ^/head.

Document loader tunable hw.re.prefer_iomap.

Sync: merge r214353 through r214648 from ^/head.

Use shorten model name and add RTL8168, RTL8111 to the list of
supported device. re(4) had been supported all variants of RTL8168,
RTL8111 and RTL810x. I think this change will cover all controllers

Use shorten model name and add RTL8168, RTL8111 to the list of
supported device. re(4) had been supported all variants of RTL8168,
RTL8111 and RTL810x. I think this change will cover all controllers
supported by re(4).

MFC after: 1 week

show more ...

Fix incorrect usage of 'assure' and 'insure'.

Approved by: rrs (mentor)

IFH@204581

Use the newly brought %U macro.

Merge from head up to r188941 (last revision before the USB stack switch)

Update the projects tree to a newer FreeBSD current.

Document loader tunable hw.re.msi_disable.
Bump .Dd

Xref altq(4) for drivers that support it according to altq(4).

Add USR997902 to the list of devices supported by re(4).

Add support for the RealTek 8169SC/8110SC and RTL8101E devices. The
latter is a PCIe 10/100 chip.

Finally fix the EEPROM reading code so that we can access the EEPROMs on all
devices. In order to ac

Add support for the RealTek 8169SC/8110SC and RTL8101E devices. The
latter is a PCIe 10/100 chip.

Finally fix the EEPROM reading code so that we can access the EEPROMs on all
devices. In order to access the EEPROM, we must select 'EEPROM programming'
mode, and then set the EEPROM chip select bit. Previously, we were setting
both bits simultaneously, which doesn't work: they must be set in the
right sequence.

Always obtain the station address from the EEPROM, now that EEPROM
reading works correctly.

Make the TX interrupt moderation code based on the internal timer
optional and turned off by default.

Make the re_diag() routine conditional and off by default. When it is
on, only use it for the original 8169, which was the only device that
that really needed it.

Modify interrupt handling to use a fast interrupt handler and fast
taskqeueue.

Correct the rgephy driver so that it only applies the DSP fixup for
PHY revs 0 and 1. Later chips are fixed and don't need the fixup.

Make the rgephy driver advertise both 1000_FD and 1000_HD bits in
autoneg mode. A couple of the devices don't autoneg correctly unless
configured this way.

show more ...