/linux/drivers/reset/ |
H A D | reset-ma35d1.c | 32 [MA35D1_RESET_CHIP] = {0x20, 0}, 33 [MA35D1_RESET_CA35CR0] = {0x20, 1}, 34 [MA35D1_RESET_CA35CR1] = {0x20, 2}, 35 [MA35D1_RESET_CM4] = {0x20, 3}, 36 [MA35D1_RESET_PDMA0] = {0x20, 4}, 37 [MA35D1_RESET_PDMA1] = {0x20, 5}, 38 [MA35D1_RESET_PDMA2] = {0x20, 6}, 39 [MA35D1_RESET_PDMA3] = {0x20, 7}, 40 [MA35D1_RESET_DISP] = {0x20, 9}, 41 [MA35D1_RESET_VCAP0] = {0x20, 10}, [all …]
|
/linux/drivers/net/wireless/realtek/rtl8xxxu/ |
H A D | 8192c.c | 21 .reg_0e00 = 0x07090c0c, 22 .reg_0e04 = 0x01020405, 23 .reg_0e08 = 0x00000000, 24 .reg_086c = 0x00000000, 26 .reg_0e10 = 0x0b0c0c0e, 27 .reg_0e14 = 0x01030506, 28 .reg_0e18 = 0x0b0c0d0e, 29 .reg_0e1c = 0x01030509, 31 .reg_0830 = 0x07090c0c, 32 .reg_0834 = 0x01020405, [all …]
|
H A D | 8723a.c | 20 .reg_0e00 = 0x0a0c0c0c, 21 .reg_0e04 = 0x02040608, 22 .reg_0e08 = 0x00000000, 23 .reg_086c = 0x00000000, 25 .reg_0e10 = 0x0a0c0d0e, 26 .reg_0e14 = 0x02040608, 27 .reg_0e18 = 0x0a0c0d0e, 28 .reg_0e1c = 0x02040608, 30 .reg_0830 = 0x0a0c0c0c, 31 .reg_0834 = 0x02040608, [all …]
|
/linux/tools/testing/selftests/bpf/ |
H A D | ip_check_defrag_frags.h | 10 0x45, 0x0, 0x0, 0x2c, 0x0, 0x1, 0x20, 0x0, 0x40, 0x11, 11 0xac, 0xe8, 0x0, 0x0, 0x0, 0x0, 0xac, 0x10, 0x1, 0xc8, 12 0xbe, 0xee, 0xbe, 0xef, 0x0, 0x3a, 0x0, 0x0, 0x54, 0x48, 13 0x49, 0x53, 0x20, 0x49, 0x53, 0x20, 0x54, 0x48, 0x45, 0x20, 14 0x4f, 0x52, 0x49, 0x47, 17 0x45, 0x0, 0x0, 0x2c, 0x0, 0x1, 0x20, 0x3, 0x40, 0x11, 18 0xac, 0xe5, 0x0, 0x0, 0x0, 0x0, 0xac, 0x10, 0x1, 0xc8, 19 0x49, 0x4e, 0x41, 0x4c, 0x20, 0x4d, 0x45, 0x53, 0x53, 0x41, 20 0x47, 0x45, 0x2c, 0x20, 0x50, 0x4c, 0x45, 0x41, 0x53, 0x45, 21 0x20, 0x52, 0x45, 0x41, [all …]
|
/linux/crypto/ |
H A D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 220 .m = "\x54\x85\x9b\x34\x2c\x49\xea\x2a", 250 "\x44\xE5\x6A\xAF\x68\xC5\x6C\x09\x2C\xD3\x8D\xC3\xBE\xF5\xD2\x0A" 283 .m = "\x54\x85\x9b\x34\x2c\x49\xea\x2a", 286 "\xed\xa3\x6b\xc9\x29\xee\xb2\x2c\x80\xc3\x39\x3b\x8c\x62\x45\x72" 321 "\xB3\x27\xDF\xEA\xEE\x2C\x82\xBB\xF7\x40\x32\xD5\x14\xC4\x94\x12" 328 "\x90\x09\xCA\xEC\x0C\xDC\xF9\x2C\xD7\xEB\xAE\xA3\xA4\x47\xD7\x33" 334 "\xA7\x1D\xD9\x1E\x06\xCD\xE8\xBA\x2C\x8C\x69\x32\xEA\xBE\x60\x71" 343 "\xAF\xE2\x75\x36\x04\xAC\x56\xA0\xAB\x52\xDE\xCE\xDD\x2C\x28\x77" [all …]
|
/linux/drivers/media/platform/samsung/s3c-camif/ |
H A D | camif-regs.h | 19 * id = 0 - codec (FIMC C), 1 - preview (FIMC P). 23 #define S3C_CAMIF_REG_CISRCFMT 0x00 25 #define CISRCFMT_ITU656_8BIT (0 << 31) 26 #define CISRCFMT_ORDER422_YCBYCR (0 << 14) 31 #define CISRCFMT_SIZE_CAM_MASK (0x1fff << 16 | 0x1fff) 34 #define S3C_CAMIF_REG_CIWDOFST 0x04 43 #define CIWDOFST_OFST_MASK (0x7ff << 16 | 0x7ff) 46 #define S3C_CAMIF_REG_CIWDOFST2 0x14 47 #define CIWDOFST2_OFST2_MASK (0xfff << 16 | 0xfff) 50 #define S3C_CAMIF_REG_CIGCTRL 0x08 [all …]
|
/linux/drivers/media/dvb-frontends/ |
H A D | stv0900_init.h | 24 { 0, 11101 }, /*C/N=-0dB*/ 83 { -5, 0xCAA1 }, /*-5dBm*/ 84 { -10, 0xC229 }, /*-10dBm*/ 85 { -15, 0xBB08 }, /*-15dBm*/ 86 { -20, 0xB4BC }, /*-20dBm*/ 87 { -25, 0xAD5A }, /*-25dBm*/ 88 { -30, 0xA298 }, /*-30dBm*/ 89 { -35, 0x98A8 }, /*-35dBm*/ 90 { -40, 0x8389 }, /*-40dBm*/ 91 { -45, 0x59BE }, /*-45dBm*/ [all …]
|
H A D | tda18271c2dd_maps.h | 3 HF_None = 0, HF_B, HF_DK, HF_G, HF_I, HF_L, HF_L1, HF_MN, HF_FM_Radio, 10 { 0, 0, 0x00, 0x00 }, /* HF_None */ 11 { 6000000, 7000000, 0x1D, 0x2C }, /* HF_B, */ 12 { 6900000, 8000000, 0x1E, 0x2C }, /* HF_DK, */ 13 { 7100000, 8000000, 0x1E, 0x2C }, /* HF_G, */ 14 { 7250000, 8000000, 0x1E, 0x2C }, /* HF_I, */ 15 { 6900000, 8000000, 0x1E, 0x2C }, /* HF_L, */ 16 { 1250000, 8000000, 0x1E, 0x2C }, /* HF_L1, */ 17 { 5400000, 6000000, 0x1C, 0x2C }, /* HF_MN, */ 18 { 1250000, 500000, 0x18, 0x2C }, /* HF_FM_Radio, */ [all …]
|
/linux/drivers/regulator/ |
H A D | pv88080-regulator.h | 11 #define PV88080_REG_EVENT_A 0x04 12 #define PV88080_REG_MASK_A 0x09 13 #define PV88080_REG_MASK_B 0x0A 14 #define PV88080_REG_MASK_C 0x0B 17 #define PV88080AA_REG_HVBUCK_CONF1 0x2D 18 #define PV88080AA_REG_HVBUCK_CONF2 0x2E 19 #define PV88080AA_REG_BUCK1_CONF0 0x27 20 #define PV88080AA_REG_BUCK1_CONF1 0x28 21 #define PV88080AA_REG_BUCK1_CONF2 0x59 22 #define PV88080AA_REG_BUCK1_CONF5 0x5C [all …]
|
/linux/Documentation/hwmon/ |
H A D | lm85.rst | 10 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 18 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 26 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 34 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 42 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 50 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 58 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 66 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 74 Addresses scanned: I2C 0x2c, 0x2d, 0x2e 235 temperature. (PWM value from 0 to 255) [all …]
|
H A D | adm1025.rst | 10 Addresses scanned: I2C 0x2c - 0x2e 18 Addresses scanned: I2C 0x2c - 0x2d 24 * Only two possible addresses (0x2c - 0x2d).
|
/linux/drivers/gpu/drm/atmel-hlcdc/ |
H A D | atmel_hlcdc_dc.c | 37 .regs_offset = 0x40, 38 .id = 0, 40 .cfgs_offset = 0x2c, 46 .clut_offset = 0x400, 51 .min_width = 0, 52 .min_height = 0, 55 .max_spw = 0x3f, 56 .max_vpw = 0x3f, 57 .max_hpw = 0xff, 68 .regs_offset = 0x40, [all …]
|
/linux/drivers/media/pci/saa7146/ |
H A D | hexium_orion.c | 21 module_param(debug, int, 0); 34 { 0, "CVBS 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 35 { 1, "CVBS 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 36 { 2, "CVBS 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 37 { 3, "CVBS 4", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 38 { 4, "CVBS 5", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 39 { 5, "CVBS 6", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 40 { 6, "Y/C 1", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 41 { 7, "Y/C 2", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, 42 { 8, "Y/C 3", V4L2_INPUT_TYPE_CAMERA, 0, 0, HEXIUM_STD, 0, V4L2_IN_CAP_STD }, [all …]
|
/linux/drivers/isdn/mISDN/ |
H A D | dsp_tones.c | 45 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, 46 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c, 47 0xdc, 0xfc, 0x6c, 48 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, 49 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c, 50 0xdc, 0xfc, 0x6c, 51 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, 52 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c, 53 0xdc, 0xfc, 0x6c, 54 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, [all …]
|
/linux/drivers/platform/x86/ |
H A D | msi-ec.c | 50 .address = 0xef, 51 .offset_start = 0x8a, 52 .offset_end = 0x80, 53 .range_min = 0x8a, 54 .range_max = 0xe4, 57 .address = 0x2e, 58 .block_address = 0x2f, 62 .address = 0xbf, 66 .address = 0x98, 70 .address = 0xf2, [all …]
|
/linux/drivers/clk/visconti/ |
H A D | clkc-tmpv770x.c | 35 { TMPV770X_CLK_PIPLL1_DIV4, "pipll1_div4", "pipll1", 0, 1, 4, }, 37 { TMPV770X_CLK_PIPLL1_DIV2, "pipll1_div2", "pipll1", 0, 1, 2, }, 39 { TMPV770X_CLK_PIPLL1_DIV1, "pipll1_div1", "pipll1", 0, 1, 1, }, 42 { TMPV770X_CLK_PIDNNPLL_DIV1, "pidnnpll_div1", "pidnnpll", 0, 1, 1, }, 43 { TMPV770X_CLK_PIREFCLK, "pirefclk", "osc2-clk", 0, 1, 1, }, 44 { TMPV770X_CLK_WDTCLK, "wdtclk", "osc2-clk", 0, 1, 1, }, 51 CLK_SET_RATE_PARENT, 0x34, 0x134, 4, 200, 55 CLK_SET_RATE_PARENT, 0x34, 0x134, 5, 20, 59 CLK_SET_RATE_PARENT, 0x34, 0x134, 6, 10, 63 CLK_SET_RATE_PARENT, 0x34, 0x134, 7, 4, [all …]
|
/linux/drivers/gpu/drm/tiny/ |
H A D | st7735r.c | 27 #define ST7735R_FRMCTR1 0xb1 28 #define ST7735R_FRMCTR2 0xb2 29 #define ST7735R_FRMCTR3 0xb3 30 #define ST7735R_INVCTR 0xb4 31 #define ST7735R_PWCTR1 0xc0 32 #define ST7735R_PWCTR2 0xc1 33 #define ST7735R_PWCTR3 0xc2 34 #define ST7735R_PWCTR4 0xc3 35 #define ST7735R_PWCTR5 0xc4 36 #define ST7735R_VMCTR1 0xc5 [all …]
|
/linux/drivers/staging/fbtft/ |
H A D | fb_st7735r.c | 16 #define DEFAULT_GAMMA "0F 1A 0F 18 2F 28 20 22 1F 1B 23 37 00 07 02 10\n" \ 17 "0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10" 29 -1, 0xB1, 0x01, 0x2C, 0x2D, 34 -1, 0xB2, 0x01, 0x2C, 0x2D, 39 -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, 44 -1, 0xB4, 0x07, 49 -1, 0xC0, 0xA2, 0x02, 0x84, 54 -1, 0xC1, 0xC5, 59 -1, 0xC2, 0x0A, 0x00, 64 -1, 0xC3, 0x8A, 0x2A, [all …]
|
/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-sm1.dtsi | 16 tdmif_a: audio-controller-0 { 18 #sound-dai-cells = <0>; 29 #sound-dai-cells = <0>; 40 #sound-dai-cells = <0>; 50 #address-cells = <0x2>; 51 #size-cells = <0x0>; 53 cpu0: cpu@0 { 56 reg = <0x0 0x0>; 65 reg = <0x0 0x1>; 74 reg = <0x0 0x2>; [all …]
|
H A D | meson-g12.dtsi | 14 tdmif_a: audio-controller-0 { 16 #sound-dai-cells = <0>; 27 #sound-dai-cells = <0>; 38 #sound-dai-cells = <0>; 52 reg = <0x0 0x40000 0x0 0x34>; 53 #sound-dai-cells = <0>; 65 reg = <0x0 0x42000 0x0 0x2000>; 68 ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; 70 clkc_audio: clock-controller@0 { 73 reg = <0x0 0x0 0x0 0xb4>; [all …]
|
/linux/include/linux/mdio/ |
H A D | mdio-xgene.h | 15 #define BLOCK_XG_MDIO_CSR_OFFSET 0x5000 16 #define BLOCK_DIAG_CSR_OFFSET 0xd000 17 #define XGENET_CONFIG_REG_ADDR 0x20 19 #define MAC_ADDR_REG_OFFSET 0x00 20 #define MAC_COMMAND_REG_OFFSET 0x04 21 #define MAC_WRITE_REG_OFFSET 0x08 22 #define MAC_READ_REG_OFFSET 0x0c 23 #define MAC_COMMAND_DONE_REG_OFFSET 0x10 25 #define CLKEN_OFFSET 0x08 26 #define SRST_OFFSET 0x00 [all …]
|
/linux/arch/arm/boot/dts/renesas/ |
H A D | emev2.dtsi | 29 #size-cells = <0>; 31 cpu0: cpu@0 { 34 reg = <0>; 49 reg = <0xe0028000 0x1000>, 50 <0xe0020000 0x0100>; 62 reg = <0xe0110000 0x10000>; 64 #size-cells = <0>; 69 #clock-cells = <0>; 71 iic0_sclkdiv: iic0_sclkdiv@624,0 { 73 reg = <0x624 0>; [all …]
|
/linux/Documentation/devicetree/bindings/leds/backlight/ |
H A D | lp855x-backlight.yaml | 61 "^rom-[0-9a-f]{2}h$": 85 #size-cells = <0>; 89 reg = <0x2c>; 91 dev-ctrl = /bits/ 8 <0x00>; 93 pwms = <&pwm 0 10000>; 98 rom-addr = /bits/ 8 <0x14>; 99 rom-val = /bits/ 8 <0xcf>; 104 rom-addr = /bits/ 8 <0x15>; 105 rom-val = /bits/ 8 <0xc7>; 110 rom-addr = /bits/ 8 <0x19>; [all …]
|
/linux/drivers/media/tuners/ |
H A D | tda18271-maps.c | 25 { .lomax = 32000, .pd = 0x5f, .d = 0xf0 }, 26 { .lomax = 35000, .pd = 0x5e, .d = 0xe0 }, 27 { .lomax = 37000, .pd = 0x5d, .d = 0xd0 }, 28 { .lomax = 41000, .pd = 0x5c, .d = 0xc0 }, 29 { .lomax = 44000, .pd = 0x5b, .d = 0xb0 }, 30 { .lomax = 49000, .pd = 0x5a, .d = 0xa0 }, 31 { .lomax = 54000, .pd = 0x59, .d = 0x90 }, 32 { .lomax = 61000, .pd = 0x58, .d = 0x80 }, 33 { .lomax = 65000, .pd = 0x4f, .d = 0x78 }, 34 { .lomax = 70000, .pd = 0x4e, .d = 0x70 }, [all …]
|
/linux/kernel/bpf/preload/iterators/ |
H A D | iterators.lskel-big-endian.h | 27 int fd = skel_link_create(prog_fd, 0, BPF_TRACE_ITER); in iterators_bpf__dump_bpf_map__attach() 29 if (fd > 0) in iterators_bpf__dump_bpf_map__attach() 38 int fd = skel_link_create(prog_fd, 0, BPF_TRACE_ITER); in iterators_bpf__dump_bpf_prog__attach() 40 if (fd > 0) in iterators_bpf__dump_bpf_prog__attach() 48 int ret = 0; in iterators_bpf__attach() 50 ret = ret < 0 ? ret : iterators_bpf__dump_bpf_map__attach(skel); in iterators_bpf__attach() 51 ret = ret < 0 ? ret : iterators_bpf__dump_bpf_prog__attach(skel); in iterators_bpf__attach() 52 return ret < 0 ? ret : 0; in iterators_bpf__attach() 96 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in iterators_bpf__load() 97 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in iterators_bpf__load() [all …]
|