Home
last modified time | relevance | path

Searched +full:0 +full:x290 (Results 1 – 25 of 102) sorted by relevance

12345

/linux/Documentation/hwmon/
H A Dlm78.rst10 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
20 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
64 inputs can measure voltages between 0 and 4.08 volts, with a resolution
H A Dw83627hf.rst35 Use 'init=0' to bypass initializing the chip.
56 same pins as GPIO[0:4]. Technically, the `w83627_THF_` does not support a
80 isaset -y -f 0x2e 0x87
81 isaset -y -f 0x2e 0x87
85 isaset -y 0x2e 0x2f 0x07 0x0b
87 # Set the base I/O address (to 0x290 in this example)::
89 isaset -y 0x2e 0x2f 0x60 0x02
90 isaset -y 0x2e 0x2f 0x61 0x90
94 isaset -y -f 0x2e 0xaa
96 The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
[all …]
H A Dsis5595.rst58 force_addr=0xaddr Set the I/O base address. Useful for boards
64 Example: 'modprobe sis5595 force_addr=0x290'
102 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
/linux/drivers/clk/mediatek/
H A Dclk-mt8196-apmixedsys.c21 #define MAINPLL_CON0 0x250
22 #define MAINPLL_CON1 0x254
23 #define UNIVPLL_CON0 0x264
24 #define UNIVPLL_CON1 0x268
25 #define MSDCPLL_CON0 0x278
26 #define MSDCPLL_CON1 0x27c
27 #define ADSPPLL_CON0 0x28c
28 #define ADSPPLL_CON1 0x290
29 #define EMIPLL_CON0 0x2a0
30 #define EMIPLL_CON1 0x2a4
[all …]
H A Dclk-mt6795-apmixedsys.c15 #define REG_REF2USB 0x8
16 #define REG_AP_PLL_CON7 0x1c
17 #define MD1_MTCMOS_OFF BIT(0)
23 #define MT6795_CON0_EN BIT(0)
43 .pll_en_bit = 0, \
47 PLL(CLK_APMIXED_ARMCA53PLL, "armca53pll", 0x200, 0x20c, 0, PLL_AO,
48 21, 0x204, 24, 0x0, 0x204, 0),
49 PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR,
50 21, 0x220, 4, 0x0, 0x224, 0),
51 PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000101, HAVE_RST_BAR,
[all …]
H A Dclk-mt8173-apmixedsys.c17 #define REGOFF_REF2USB 0x8
18 #define REGOFF_HDMI_REF 0x40
52 { .div = 0, .freq = MT8173_PLL_FMAX },
61 PLL(CLK_APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0, PLL_AO,
62 21, 0x204, 24, 0x0, 0x204, 0),
63 PLL(CLK_APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0, PLL_AO,
64 21, 0x214, 24, 0x0, 0x214, 0),
65 PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000100, HAVE_RST_BAR, 21,
66 0x220, 4, 0x0, 0x224, 0),
67 PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000000, HAVE_RST_BAR, 7,
[all …]
H A Dclk-mt8135-apmixedsys.c38 PLL(CLK_APMIXED_ARMPLL1, "armpll1", 0x200, 0x218, 0x80000000, 0, 21, 0x204, 24, 0x0, 0x204, 0),
39 PLL(CLK_APMIXED_ARMPLL2, "armpll2", 0x2cc, 0x2e4, 0x80000000, 0, 21, 0x2d0, 24, 0x0, 0x2d0, 0),
40 …PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x21c, 0x234, 0xf0000000, HAVE_RST_BAR, 21, 0x21c, 6, 0x0, 0x2…
41 …PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x238, 0x250, 0xf3000000, HAVE_RST_BAR, 7, 0x238, 6, 0x0, 0x23…
42 …PLL(CLK_APMIXED_MMPLL, "mmpll", 0x254, 0x26c, 0xf0000000, HAVE_RST_BAR, 21, 0x254, 6, 0x0, 0x258, …
43 PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x278, 0x290, 0x80000000, 0, 21, 0x278, 6, 0x0, 0x27c, 0),
44 PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x294, 0x2ac, 0x80000000, 0, 31, 0x294, 6, 0x0, 0x298, 0),
45 PLL(CLK_APMIXED_LVDSPLL, "lvdspll", 0x2b0, 0x2c8, 0x80000000, 0, 21, 0x2b0, 6, 0x0, 0x2b4, 0),
46 PLL(CLK_APMIXED_AUDPLL, "audpll", 0x2e8, 0x300, 0x80000000, 0, 31, 0x2e8, 6, 0x2f8, 0x2ec, 0),
47 PLL(CLK_APMIXED_VDECPLL, "vdecpll", 0x304, 0x31c, 0x80000000, 0, 21, 0x2b0, 6, 0x0, 0x308, 0),
[all …]
/linux/Documentation/devicetree/bindings/spi/
H A Damlogic,a1-spifc.yaml40 reg = <0xfd000400 0x290>;
43 #size-cells = <0>;
/linux/drivers/media/platform/mediatek/mdp3/
H A Dmdp_reg_rdma.h10 #define MDP_RDMA_EN 0x000
11 #define MDP_RDMA_RESET 0x008
12 #define MDP_RDMA_CON 0x020
13 #define MDP_RDMA_GMCIF_CON 0x028
14 #define MDP_RDMA_SRC_CON 0x030
15 #define MDP_RDMA_MF_BKGD_SIZE_IN_BYTE 0x060
16 #define MDP_RDMA_MF_BKGD_SIZE_IN_PXL 0x068
17 #define MDP_RDMA_MF_SRC_SIZE 0x070
18 #define MDP_RDMA_MF_CLIP_SIZE 0x078
19 #define MDP_RDMA_MF_OFFSET_1 0x080
[all …]
/linux/sound/soc/tegra/
H A Dtegra210_mixer.h13 #define TEGRA210_MIXER_RX1_SOFT_RESET 0x04
14 #define TEGRA210_MIXER_RX1_STATUS 0x10
15 #define TEGRA210_MIXER_RX1_CIF_CTRL 0x24
16 #define TEGRA210_MIXER_RX1_CTRL 0x28
17 #define TEGRA210_MIXER_RX1_PEAK_CTRL 0x2c
18 #define TEGRA210_MIXER_RX1_SAMPLE_COUNT 0x30
21 #define TEGRA210_MIXER_TX1_ENABLE 0x280
22 #define TEGRA210_MIXER_TX1_SOFT_RESET 0x284
23 #define TEGRA210_MIXER_TX1_STATUS 0x290
24 #define TEGRA210_MIXER_TX1_INT_STATUS 0x294
[all …]
/linux/arch/arm/boot/dts/nxp/imx/
H A Dimxrt1050-pinfunc.h10 #define IMX_PAD_SION 0x40000000
17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0
18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0
19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1
20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0
21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0
22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0
24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0
25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0
26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1
[all …]
H A Dimx6sl-pinfunc.h13 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0
14 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0
15 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0
16 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0
17 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0
18 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0
19 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0
20 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0
21 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0
22 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0
[all …]
H A Dimx50-pinfunc.h13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0
14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0
15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0
16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0
17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0
18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0
19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0
20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0
21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0
22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0
[all …]
/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mq-pinfunc.h15 #define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ 0x014 0x27C 0x000 0x0 0…
16 #define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ 0x018 0x280 0x000 0x0 0…
17 #define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF 0x01C 0x284 0x000 0x0 0…
18 #define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B 0x020 0x288 0x000 0x0 0…
19 #define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B 0x024 0x28C 0x000 0x0 0…
20 #define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0…
21 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0…
22 #define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0…
23 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0…
24 #define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0…
[all …]
H A Dimx8mm-pinfunc.h14 #define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0…
15 #define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0…
16 #define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0…
17 #define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0…
18 #define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0…
19 #define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0…
20 #define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0…
21 #define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x4BC 0x5 0…
22 #define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0…
23 #define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE 0x02C 0x294 0x000 0x7 0…
[all …]
H A Dimx8mp-pinfunc.h10 #define MX8MP_DSE_X1 0x0
11 #define MX8MP_DSE_X2 0x4
12 #define MX8MP_DSE_X4 0x2
13 #define MX8MP_DSE_X6 0x6
16 #define MX8MP_FSEL_FAST 0x10
17 #define MX8MP_FSEL_SLOW 0x0
20 #define MX8MP_ODE_ENABLE 0x20
21 #define MX8MP_ODE_DISABLE 0x0
23 #define MX8MP_PULL_DOWN 0x0
24 #define MX8MP_PULL_UP 0x40
[all …]
H A Dimx8mn-pinfunc.h14 …ne MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0
15 …ne MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3
16 …ne MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0
17 …ne MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3
18 …ne MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0
19 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0
20 …ne MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0
21 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0
22 …ne MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0
23 …ne MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0
[all …]
/linux/drivers/media/pci/intel/ipu6/
H A Dipu6-platform-isys-csi2-reg.h9 #define CSI_REG_BASE 0x220000
10 #define CSI_REG_PORT_BASE(id) (CSI_REG_BASE + (id) * 0x1000)
13 #define CSI_REG_PORT_GPREG_SRST 0x0
14 #define CSI_REG_PORT_GPREG_CSI2_SLV_REG_SRST 0x4
15 #define CSI_REG_PORT_GPREG_CSI2_PORT_CONTROL 0x8
24 #define CSI_PORT_REG_BASE_IRQ_CSI 0x80
25 #define CSI_PORT_REG_BASE_IRQ_CSI_SYNC 0xA0
26 #define CSI_PORT_REG_BASE_IRQ_S2M_SIDS0TOS7 0xC0
27 #define CSI_PORT_REG_BASE_IRQ_S2M_SIDS8TOS15 0xE0
29 #define CSI_PORT_REG_BASE_IRQ_EDGE_OFFSET 0x0
[all …]
/linux/drivers/gpu/drm/bridge/
H A Dnwl-dsi.h12 #define NWL_DSI_CFG_NUM_LANES 0x0
13 #define NWL_DSI_CFG_NONCONTINUOUS_CLK 0x4
14 #define NWL_DSI_CFG_T_PRE 0x8
15 #define NWL_DSI_CFG_T_POST 0xc
16 #define NWL_DSI_CFG_TX_GAP 0x10
17 #define NWL_DSI_CFG_AUTOINSERT_EOTP 0x14
18 #define NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP 0x18
19 #define NWL_DSI_CFG_HTX_TO_COUNT 0x1c
20 #define NWL_DSI_CFG_LRX_H_TO_COUNT 0x20
21 #define NWL_DSI_CFG_BTA_H_TO_COUNT 0x24
[all …]
/linux/arch/sh/include/mach-sdk7786/mach/
H A Dfpga.h9 #define SRSTR 0x000
10 #define SRSTR_MAGIC 0x1971 /* Fixed magical read value */
12 #define INTASR 0x010
13 #define INTAMR 0x020
14 #define MODSWR 0x030
15 #define INTTESTR 0x040
16 #define SYSSR 0x050
17 #define NRGPR 0x060
19 #define NMISR 0x070
20 #define NMISR_MAN_NMI BIT(0)
[all …]
/linux/drivers/gpu/drm/rockchip/
H A Drk3066_hdmi.h10 #define GRF_SOC_CON0 0x150
13 #define DDC_SEGMENT_ADDR 0x30
15 #define HDMI_MAXIMUM_INFO_FRAME_SIZE 0x11
17 #define N_32K 0x1000
18 #define N_441K 0x1880
19 #define N_882K 0x3100
20 #define N_1764K 0x6200
21 #define N_48K 0x1800
22 #define N_96K 0x3000
23 #define N_192K 0x6000
[all …]
/linux/include/uapi/linux/
H A Dedd.h9 * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
22 * it under the terms of the GNU General Public License v2.0 as published by
36 #define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF
38 #define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */
42 #define CHECKEXTENSIONSPRESENT 0x41
43 #define GETDEVICEPARAMETERS 0x48
44 #define LEGACYGETDEVICEPARAMETERS 0x08
45 #define EDDMAGIC1 0x55AA
46 #define EDDMAGIC2 0xAA55
49 #define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */
[all …]
/linux/drivers/video/fbdev/omap2/omapfb/dss/
H A Dhdmi4_core.h15 #define HDMI_CORE_SYS_VND_IDL 0x0
16 #define HDMI_CORE_SYS_DEV_IDL 0x8
17 #define HDMI_CORE_SYS_DEV_IDH 0xC
18 #define HDMI_CORE_SYS_DEV_REV 0x10
19 #define HDMI_CORE_SYS_SRST 0x14
20 #define HDMI_CORE_SYS_SYS_CTRL1 0x20
21 #define HDMI_CORE_SYS_SYS_STAT 0x24
22 #define HDMI_CORE_SYS_SYS_CTRL3 0x28
23 #define HDMI_CORE_SYS_DCTL 0x34
24 #define HDMI_CORE_SYS_DE_DLY 0xC8
[all …]
/linux/drivers/gpu/drm/omapdrm/dss/
H A Dhdmi4_core.h15 #define HDMI_CORE_SYS_VND_IDL 0x0
16 #define HDMI_CORE_SYS_DEV_IDL 0x8
17 #define HDMI_CORE_SYS_DEV_IDH 0xC
18 #define HDMI_CORE_SYS_DEV_REV 0x10
19 #define HDMI_CORE_SYS_SRST 0x14
20 #define HDMI_CORE_SYS_SYS_CTRL1 0x20
21 #define HDMI_CORE_SYS_SYS_STAT 0x24
22 #define HDMI_CORE_SYS_SYS_CTRL3 0x28
23 #define HDMI_CORE_SYS_DCTL 0x34
24 #define HDMI_CORE_SYS_DE_DLY 0xC8
[all …]
/linux/Documentation/sound/cards/
H A Dmultisound.sh77 # 0x250, 0x260 or 0x270. This port can be disabled to have the card
96 # to obtain one with the command `pnpdump 1 0x203' -- this may vary
107 # io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil
108 # synth to 0x330 and irq 9 (may need editing for your system):
110 # (READPORT 0x0203)
115 # (CONFIGURE BVJ0440/-1 (LD 0
116 # (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000))
121 # (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E)))
140 # If you specify cfg=0x250 for the snd-msnd-pinnacle module, it
143 # on the card to 0x250, 0x260 or 0x270).
[all …]

12345