/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mm-phygate-tauri-l.dts | 26 #clock-cells = <0>; 32 pinctrl-0 = <&pinctrl_gpiokeys>; 44 pinctrl-0 = <&pinctrl_leds>; 71 pinctrl-0 = <&pinctrl_usbhubpwr>; 82 pinctrl-0 = <&pinctrl_usbotg1pwr>; 94 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; 106 pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; 108 #size-cells = <0>; 112 can0: can@0 { 114 reg = <0>; [all …]
|
H A D | imx8mp-msc-sm2s.dtsi | 25 pinctrl-0 = <&pinctrl_usb0_vbus>; 36 pinctrl-0 = <&pinctrl_usb1_vbus>; 46 pinctrl-0 = <&pinctrl_usdhc2_vmmc>; 70 lcd0_backlight: backlight-0 { 73 pinctrl-0 = <&pinctrl_lcd0_backlight>; 74 pwms = <&pwm1 0 100000 0>; 75 brightness-levels = <0 255>; 85 pinctrl-0 = <&pinctrl_lcd1_backlight>; 86 pwms = <&pwm2 0 100000 0>; 87 brightness-levels = <0 255>; [all …]
|
H A D | imx8mn-pinfunc.h | 14 …ne MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0 15 …ne MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3 16 …ne MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0 17 …ne MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3 18 …ne MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 19 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0 20 …ne MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 21 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 22 …ne MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 23 …ne MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 [all …]
|
/linux/drivers/clk/mediatek/ |
H A D | clk-mt8196-vdec.c | 19 .set_ofs = 0x0, 20 .clr_ofs = 0x4, 21 .sta_ofs = 0x0, 25 .set_ofs = 0x0088, 26 .clr_ofs = 0x008c, 27 .sta_ofs = 0x2c44, 31 .set_ofs = 0x200, 32 .clr_ofs = 0x204, 33 .sta_ofs = 0x200, 37 .set_ofs = 0x0080, [all …]
|
/linux/Documentation/admin-guide/ |
H A D | ramoops.rst | 29 Typically the default value of ``mem_type=0`` should be used as that sets the pstore 46 ``max_reason`` should be set to 1 (KMSG_DUMP_PANIC). Setting this to 0 71 mem=128M ramoops.mem_address=0x8000000 ramoops.ecc=1 84 reg = <0 0x8f000000 0 0x100000>; 85 record-size = <0x4000>; 86 console-size = <0x4000>; 168 0 ffffffff8101ea64 ffffffff8101bcda native_apic_mem_read <- disconnect_bsp_APIC+0x6a/0xc0 169 0 ffffffff8101ea44 ffffffff8101bcf6 native_apic_mem_write <- disconnect_bsp_APIC+0x86/0xc0 170 0 ffffffff81020084 ffffffff8101a4b5 hpet_disable <- native_machine_shutdown+0x75/0x90 171 0 ffffffff81005f94 ffffffff8101a4bb iommu_shutdown_noop <- native_machine_shutdown+0x7b/0x90 [all …]
|
/linux/sound/pci/ice1712/ |
H A D | wm8766.h | 13 #define WM8766_REG_DACL1 0x00 14 #define WM8766_REG_DACR1 0x01 15 #define WM8766_VOL_MASK 0x1ff /* incl. update bit */ 17 #define WM8766_REG_DACCTRL1 0x02 18 #define WM8766_DAC_MUTEALL (1 << 0) 23 #define WM8766_DAC_PL_MASK 0x1e0 30 #define WM8766_REG_IFCTRL 0x03 31 #define WM8766_IF_FMT_RIGHTJ (0 << 0) 32 #define WM8766_IF_FMT_LEFTJ (1 << 0) 33 #define WM8766_IF_FMT_I2S (2 << 0) [all …]
|
/linux/drivers/pinctrl/samsung/ |
H A D | pinctrl-exynos-arm.c | 27 .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, }, 32 .reg_offset = { 0x00, 0x04, 0x08, 0x0c, }, 36 #define S5P_OTHERS 0xE000 43 #define S5P_PIN_PULL_DISABLE 0 86 clk_base = of_iomap(np, 0); in s5pv210_retention_init() 106 EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), 107 EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpa1", 0x04), 108 EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), 109 EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), 110 EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), [all …]
|
/linux/drivers/phy/qualcomm/ |
H A D | phy-qcom-qmp-pcs-v4_20.h | 10 #define QPHY_V4_20_PCS_RX_SIGDET_LVL 0x188 11 #define QPHY_V4_20_PCS_EQ_CONFIG2 0x1d8 12 #define QPHY_V4_20_PCS_EQ_CONFIG4 0x1e0 13 #define QPHY_V4_20_PCS_EQ_CONFIG5 0x1e4
|
H A D | phy-qcom-qmp-pcs-v5_20.h | 9 #define QPHY_V5_20_PCS_INSIG_SW_CTRL7 0x060 10 #define QPHY_V5_20_PCS_INSIG_MX_CTRL7 0x07c 11 #define QPHY_V5_20_PCS_LOCK_DETECT_CONFIG1 0x0c4 12 #define QPHY_V5_20_PCS_LOCK_DETECT_CONFIG2 0x0c8 13 #define QPHY_V5_20_PCS_G3S2_PRE_GAIN 0x170 14 #define QPHY_V5_20_PCS_RX_SIGDET_LVL 0x188 15 #define QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG1 0x1b8 16 #define QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG2 0x1bc 17 #define QPHY_V5_20_PCS_EQ_CONFIG2 0x1d8 18 #define QPHY_V5_20_PCS_EQ_CONFIG4 0x1e0 [all …]
|
H A D | phy-qcom-qmp-pcs-v6_20.h | 10 #define QPHY_V6_20_PCS_G12S1_TXDEEMPH_M6DB 0x170 11 #define QPHY_V6_20_PCS_G3S2_PRE_GAIN 0x178 12 #define QPHY_V6_20_PCS_RX_SIGDET_LVL 0x190 13 #define QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL 0x1b8 14 #define QPHY_V6_20_PCS_TX_RX_CONFIG1 0x1dc 15 #define QPHY_V6_20_PCS_TX_RX_CONFIG2 0x1e0 16 #define QPHY_V6_20_PCS_EQ_CONFIG4 0x1f8 17 #define QPHY_V6_20_PCS_EQ_CONFIG5 0x1fc
|
H A D | phy-qcom-qmp-pcs-v7.h | 10 #define QPHY_V7_PCS_SW_RESET 0x000 11 #define QPHY_V7_PCS_PCS_STATUS1 0x014 12 #define QPHY_V7_PCS_POWER_DOWN_CONTROL 0x040 13 #define QPHY_V7_PCS_START_CONTROL 0x044 14 #define QPHY_V7_PCS_POWER_STATE_CONFIG1 0x090 15 #define QPHY_V7_PCS_LOCK_DETECT_CONFIG1 0x0c4 16 #define QPHY_V7_PCS_LOCK_DETECT_CONFIG2 0x0c8 17 #define QPHY_V7_PCS_LOCK_DETECT_CONFIG3 0x0cc 18 #define QPHY_V7_PCS_LOCK_DETECT_CONFIG6 0x0d8 19 #define QPHY_V7_PCS_REFGEN_REQ_CONFIG1 0x0dc [all …]
|
H A D | phy-qcom-qmp-pcs-v6-n4.h | 10 #define QPHY_V6_N4_PCS_SW_RESET 0x000 11 #define QPHY_V6_N4_PCS_PCS_STATUS1 0x014 12 #define QPHY_V6_N4_PCS_POWER_DOWN_CONTROL 0x040 13 #define QPHY_V6_N4_PCS_START_CONTROL 0x044 14 #define QPHY_V6_N4_PCS_POWER_STATE_CONFIG1 0x090 15 #define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG1 0x0c4 16 #define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG2 0x0c8 17 #define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG3 0x0cc 18 #define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG6 0x0d8 19 #define QPHY_V6_N4_PCS_REFGEN_REQ_CONFIG1 0x0dc [all …]
|
H A D | phy-qcom-qmp-pcs-v8.h | 10 #define QPHY_V8_PCS_SW_RESET 0x000 11 #define QPHY_V8_PCS_PCS_STATUS1 0x014 12 #define QPHY_V8_PCS_POWER_DOWN_CONTROL 0x040 13 #define QPHY_V8_PCS_START_CONTROL 0x044 14 #define QPHY_V8_PCS_POWER_STATE_CONFIG1 0x090 15 #define QPHY_V8_PCS_LOCK_DETECT_CONFIG1 0x0c4 16 #define QPHY_V8_PCS_LOCK_DETECT_CONFIG2 0x0c8 17 #define QPHY_V8_PCS_LOCK_DETECT_CONFIG3 0x0cc 18 #define QPHY_V8_PCS_LOCK_DETECT_CONFIG6 0x0d8 19 #define QPHY_V8_PCS_REFGEN_REQ_CONFIG1 0x0dc [all …]
|
H A D | phy-qcom-qmp-pcs-ufs-v4.h | 10 #define QPHY_V4_PCS_UFS_PHY_START 0x000 11 #define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004 12 #define QPHY_V4_PCS_UFS_SW_RESET 0x008 13 #define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c 14 #define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010 15 #define QPHY_V4_PCS_UFS_PLL_CNTL 0x02c 16 #define QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030 17 #define QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038 18 #define QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 19 #define QPHY_V4_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 [all …]
|
H A D | phy-qcom-qmp-pcs-ufs-v5.h | 11 #define QPHY_V5_PCS_UFS_PHY_START 0x000 12 #define QPHY_V5_PCS_UFS_POWER_DOWN_CONTROL 0x004 13 #define QPHY_V5_PCS_UFS_SW_RESET 0x008 14 #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c 15 #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010 16 #define QPHY_V5_PCS_UFS_PLL_CNTL 0x02c 17 #define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030 18 #define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038 19 #define QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 20 #define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 [all …]
|
H A D | phy-qcom-qmp-pcs-v5.h | 10 #define QPHY_V5_PCS_SW_RESET 0x000 11 #define QPHY_V5_PCS_PCS_STATUS1 0x014 12 #define QPHY_V5_PCS_POWER_DOWN_CONTROL 0x040 13 #define QPHY_V5_PCS_START_CONTROL 0x044 14 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG1 0x0c4 15 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG2 0x0c8 16 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG3 0x0cc 17 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG6 0x0d8 18 #define QPHY_V5_PCS_REFGEN_REQ_CONFIG1 0x0dc 19 #define QPHY_V5_PCS_G3S2_PRE_GAIN 0x170 [all …]
|
H A D | phy-qcom-qmp-qserdes-txrx-v4_20.h | 10 #define QSERDES_V4_20_TX_LANE_MODE_1 0x88 11 #define QSERDES_V4_20_TX_LANE_MODE_2 0x8c 12 #define QSERDES_V4_20_TX_LANE_MODE_3 0x90 13 #define QSERDES_V4_20_TX_VMODE_CTRL1 0xc4 14 #define QSERDES_V4_20_TX_PI_QEC_CTRL 0xe0 17 #define QSERDES_V4_20_RX_FO_GAIN_RATE2 0x008 18 #define QSERDES_V4_20_RX_UCDR_PI_CONTROLS 0x058 19 #define QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE 0x0ac 20 #define QSERDES_V4_20_RX_DFE_3 0x110 21 #define QSERDES_V4_20_RX_DFE_DAC_ENABLE1 0x134 [all …]
|
/linux/Documentation/ABI/testing/ |
H A D | sysfs-driver-jz4780-efuse | 10 0x000 64 bit Random Number 11 0x008 128 bit Ingenic Chip ID 12 0x018 128 bit Customer ID 13 0x028 3520 bit Reserved 14 0x1E0 8 bit Protect Segment 15 0x1E1 2296 bit HDMI Key 16 0x300 2048 bit Security boot key
|
/linux/sound/isa/sb/ |
H A D | emu8000_patch.c | 29 for (i = 0; i < EMU8000_DRAM_VOICES; i++) { in snd_emu8000_open_dma() 35 EMU8000_VTFT_WRITE(emu, 30, 0); in snd_emu8000_open_dma() 36 EMU8000_PSST_WRITE(emu, 30, 0x1d8); in snd_emu8000_open_dma() 37 EMU8000_CSL_WRITE(emu, 30, 0x1e0); in snd_emu8000_open_dma() 38 EMU8000_CCCA_WRITE(emu, 30, 0x1d8); in snd_emu8000_open_dma() 39 EMU8000_VTFT_WRITE(emu, 31, 0); in snd_emu8000_open_dma() 40 EMU8000_PSST_WRITE(emu, 31, 0x1d8); in snd_emu8000_open_dma() 41 EMU8000_CSL_WRITE(emu, 31, 0x1e0); in snd_emu8000_open_dma() 42 EMU8000_CCCA_WRITE(emu, 31, 0x1d8); in snd_emu8000_open_dma() 44 return 0; in snd_emu8000_open_dma() [all …]
|
/linux/arch/sh/drivers/pci/ |
H A D | pci-sh7780.h | 13 #define PCIECR 0xFE000008 14 #define PCIECR_ENBL 0x01 17 #define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ 18 #define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */ 20 #define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ 23 #define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ 24 #define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ 25 #define SH7780_PCIAIR 0x11C /* Error Address Register */ 26 #define SH7780_PCICIR 0x120 /* Error Command/Data Register */ 27 #define SH7780_PCIAINT 0x130 /* Arbiter Interrupt Register */ [all …]
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | ti,iodelay.txt | 24 reg = <0x4844a000 0x0d1c>; 26 #size-cells = <0>; 35 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */ 36 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */ 37 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */ 38 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */ 39 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */ 40 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */ 41 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ 42 0x1ec A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */ [all …]
|
/linux/Documentation/devicetree/bindings/display/msm/ |
H A D | dsi-phy-14nm.yaml | 64 reg = <0x0ae94400 0x200>, 65 <0x0ae94600 0x280>, 66 <0x0ae94a00 0x1e0>; 72 #phy-cells = <0>;
|
/linux/drivers/media/platform/chips-media/coda/ |
H A D | coda_regs.h | 14 #define CODA_REG_BIT_CODE_RUN 0x000 15 #define CODA_REG_RUN_ENABLE (1 << 0) 16 #define CODA_REG_BIT_CODE_DOWN 0x004 17 #define CODA_DOWN_ADDRESS_SET(x) (((x) & 0xffff) << 16) 18 #define CODA_DOWN_DATA_SET(x) ((x) & 0xffff) 19 #define CODA_REG_BIT_HOST_IN_REQ 0x008 20 #define CODA_REG_BIT_INT_CLEAR 0x00c 21 #define CODA_REG_BIT_INT_CLEAR_SET 0x1 22 #define CODA_REG_BIT_INT_STATUS 0x010 23 #define CODA_REG_BIT_CODE_RESET 0x014 [all …]
|
/linux/arch/arm/mach-tegra/ |
H A D | irq.c | 26 #define SGI_MASK 0xFFFF 51 writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL); in tegra_gic_notifier()
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imxrt1050-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0 18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0 19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1 20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0 21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0 22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0 24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0 25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0 26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1 [all …]
|