/linux/drivers/video/backlight/ |
H A D | lms283gf05.c | 33 { 0x07, 0x0000, 0 }, 34 { 0x13, 0x0000, 10 }, 36 { 0x11, 0x3004, 0 }, 37 { 0x14, 0x200F, 0 }, 38 { 0x10, 0x1a20, 0 }, 39 { 0x13, 0x0040, 50 }, 41 { 0x13, 0x0060, 0 }, 42 { 0x13, 0x0070, 200 }, 44 { 0x01, 0x0127, 0 }, 45 { 0x02, 0x0700, 0 }, [all …]
|
/linux/include/video/ |
H A D | aty128.h | 13 #define CLOCK_CNTL_INDEX 0x0008 14 #define CLOCK_CNTL_DATA 0x000c 15 #define BIOS_0_SCRATCH 0x0010 16 #define BUS_CNTL 0x0030 17 #define BUS_CNTL1 0x0034 18 #define GEN_INT_CNTL 0x0040 19 #define CRTC_GEN_CNTL 0x0050 20 #define CRTC_EXT_CNTL 0x0054 21 #define DAC_CNTL 0x0058 22 #define I2C_CNTL_1 0x0094 [all …]
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | samsung,pinctrl.yaml | 90 "^[a-z]+[0-9]*-gpio-bank$": 169 reg = <0x7f008000 0x1000>; 175 interrupts-extended = <&vic0 0>, 177 <&vic1 0>, 192 samsung,pins = "gpa-0", "gpa-1"; 194 samsung,pin-pud = <0>; 205 reg = <0x11400000 0x1000>; 209 pinctrl-0 = <&sleep0>; 222 samsung,pins = "gpa0-0", "gpa0-1"; 224 samsung,pin-pud = <0>; [all …]
|
/linux/drivers/media/pci/cx25821/ |
H A D | cx25821-medusa-reg.h | 13 #define HOST_REGISTER1 0x0000 14 #define HOST_REGISTER2 0x0001 17 #define CHIP_CTRL 0x0100 18 #define AFE_AB_CTRL 0x0104 19 #define AFE_CD_CTRL 0x0108 20 #define AFE_EF_CTRL 0x010C 21 #define AFE_GH_CTRL 0x0110 22 #define DENC_AB_CTRL 0x0114 23 #define BYP_AB_CTRL 0x0118 24 #define MON_A_CTRL 0x011C [all …]
|
/linux/drivers/net/wireless/realtek/rtw88/ |
H A D | rtw8822c.h | 11 u8 res0[0x30]; /* 0x120 */ 12 u8 vid[2]; /* 0x150 */ 15 u8 mac_addr[ETH_ALEN]; /* 0x157 */ 16 u8 res2[0x3d]; 20 u8 res0[0x4a]; /* 0x120 */ 21 u8 mac_addr[ETH_ALEN]; /* 0x16a */ 25 u8 mac_addr[ETH_ALEN]; /* 0x120 */ 33 u8 ltr_cap; /* 0x133 */ 38 u8 res0:2; /* 0x144 */ 64 u8 res1[0x09]; [all …]
|
/linux/drivers/gpu/drm/loongson/ |
H A D | lsdc_regs.h | 24 #define LS7A1000_PIXPLL0_REG 0x04B0 25 #define LS7A1000_PIXPLL1_REG 0x04C0 28 #define LS7A1000_PLL_GFX_REG 0x0490 30 #define LS7A1000_CONF_REG_BASE 0x10010000 34 #define LS7A2000_PIXPLL0_REG 0x04B0 35 #define LS7A2000_PIXPLL1_REG 0x04C0 38 #define LS7A2000_PLL_GFX_REG 0x0490 40 #define LS7A2000_CONF_REG_BASE 0x10010000 43 #define CFG_PIX_FMT_MASK GENMASK(2, 0) 46 LSDC_PF_NONE = 0, [all …]
|
/linux/drivers/net/usb/ |
H A D | aqc111.c | 33 if (unlikely(ret < 0)) in aqc111_read_cmd_nopm() 35 "Failed to read(0x%x) reg index 0x%04x: %d\n", in aqc111_read_cmd_nopm() 49 if (unlikely(ret < 0)) in aqc111_read_cmd() 51 "Failed to read(0x%x) reg index 0x%04x: %d\n", in aqc111_read_cmd() 60 int ret = 0; in aqc111_read16_cmd_nopm() 71 int ret = 0; in aqc111_read16_cmd() 95 err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), in __aqc111_write_cmd() 100 if (unlikely(err < 0)) in __aqc111_write_cmd() 102 "Failed to write(0x%x) reg index 0x%04x: %d\n", in __aqc111_write_cmd() 126 if (usb_autopm_get_interface(dev->intf) < 0) in aqc111_write_cmd() [all …]
|
/linux/drivers/staging/rtl8723bs/hal/ |
H A D | hal_com_phycfg.c | 16 u8 value = 0; in PHY_GetTxPowerByRateBase() 19 return 0; in PHY_GetTxPowerByRateBase() 23 value = pHalData->TxPwrByRateBase2_4G[RfPath][0]; in PHY_GetTxPowerByRateBase() 49 pHalData->TxPwrByRateBase2_4G[RfPath][0] = Value; in phy_SetTxPowerByRateBase() 87 u8 index = 0; in PHY_GetRateSectionIndexOfTxPowerByRate() 89 if (pDM_Odm->PhyRegPgVersion == 0) { in PHY_GetRateSectionIndexOfTxPowerByRate() 92 index = 0; in PHY_GetRateSectionIndexOfTxPowerByRate() 103 else if (BitMask == 0x000000ff) in PHY_GetRateSectionIndexOfTxPowerByRate() 147 u8 i = 0; in PHY_GetRateValuesOfTxPowerByRate() 152 RateIndex[0] = PHY_GetRateIndexOfTxPowerByRate(MGN_6M); in PHY_GetRateValuesOfTxPowerByRate() [all …]
|
/linux/include/linux/mfd/mt6357/ |
H A D | registers.h | 10 #define MT6357_TOP0_ID 0x0 11 #define MT6357_TOP0_REV0 0x2 12 #define MT6357_TOP0_DSN_DBI 0x4 13 #define MT6357_TOP0_DSN_DXI 0x6 14 #define MT6357_HWCID 0x8 15 #define MT6357_SWCID 0xa 16 #define MT6357_PONSTS 0xc 17 #define MT6357_POFFSTS 0xe 18 #define MT6357_PSTSCTL 0x10 19 #define MT6357_PG_DEB_STS0 0x12 [all …]
|
/linux/drivers/net/ethernet/marvell/octeontx2/af/ |
H A D | rvu_reg.h | 12 #define RVU_AF_MSIXTR_BASE (0x10) 13 #define RVU_AF_ECO (0x20) 14 #define RVU_AF_BLK_RST (0x30) 15 #define RVU_AF_PF_BAR4_ADDR (0x40) 16 #define RVU_AF_RAS (0x100) 17 #define RVU_AF_RAS_W1S (0x108) 18 #define RVU_AF_RAS_ENA_W1S (0x110) 19 #define RVU_AF_RAS_ENA_W1C (0x118) 20 #define RVU_AF_GEN_INT (0x120) 21 #define RVU_AF_GEN_INT_W1S (0x128) [all …]
|
/linux/arch/sh/kernel/cpu/sh4a/ |
H A D | setup-sh7757.c | 33 DEFINE_RES_MEM(0xfe4b0000, 0x100), /* SCIF2 */ 34 DEFINE_RES_IRQ(evt2irq(0x700)), 39 .id = 0, 53 DEFINE_RES_MEM(0xfe4c0000, 0x100), /* SCIF3 */ 54 DEFINE_RES_IRQ(evt2irq(0xb80)), 73 DEFINE_RES_MEM(0xfe4d0000, 0x100), /* SCIF4 */ 74 DEFINE_RES_IRQ(evt2irq(0xf00)), 92 DEFINE_RES_MEM(0xfe430000, 0x20), 93 DEFINE_RES_IRQ(evt2irq(0x580)), 94 DEFINE_RES_IRQ(evt2irq(0x5a0)), [all …]
|
/linux/drivers/gpu/drm/meson/ |
H A D | meson_registers.h | 18 #define VPP2_DUMMY_DATA 0x1900 19 #define VPP2_LINE_IN_LENGTH 0x1901 20 #define VPP2_PIC_IN_HEIGHT 0x1902 21 #define VPP2_SCALE_COEF_IDX 0x1903 22 #define VPP2_SCALE_COEF 0x1904 23 #define VPP2_VSC_REGION12_STARTP 0x1905 24 #define VPP2_VSC_REGION34_STARTP 0x1906 25 #define VPP2_VSC_REGION4_ENDP 0x1907 26 #define VPP2_VSC_START_PHASE_STEP 0x1908 27 #define VPP2_VSC_REGION0_PHASE_SLOPE 0x1909 [all …]
|
/linux/drivers/gpu/drm/amd/include/asic_reg/dce/ |
H A D | dce_6_0_d.h | 26 #define ixATTR00 0x0000 27 #define ixATTR01 0x0001 28 #define ixATTR02 0x0002 29 #define ixATTR03 0x0003 30 #define ixATTR04 0x0004 31 #define ixATTR05 0x0005 32 #define ixATTR06 0x0006 33 #define ixATTR07 0x0007 34 #define ixATTR08 0x0008 35 #define ixATTR09 0x0009 [all …]
|
H A D | dce_8_0_d.h | 27 #define mmPIPE0_PG_CONFIG 0x1760 28 #define mmPIPE0_PG_ENABLE 0x1761 29 #define mmPIPE0_PG_STATUS 0x1762 30 #define mmPIPE1_PG_CONFIG 0x1764 31 #define mmPIPE1_PG_ENABLE 0x1765 32 #define mmPIPE1_PG_STATUS 0x1766 33 #define mmPIPE2_PG_CONFIG 0x1768 34 #define mmPIPE2_PG_ENABLE 0x1769 35 #define mmPIPE2_PG_STATUS 0x176a 36 #define mmPIPE3_PG_CONFIG 0x176c [all …]
|
H A D | dce_10_0_d.h | 27 #define mmPIPE0_PG_CONFIG 0x2c0 28 #define mmPIPE0_PG_ENABLE 0x2c1 29 #define mmPIPE0_PG_STATUS 0x2c2 30 #define mmPIPE1_PG_CONFIG 0x2c3 31 #define mmPIPE1_PG_ENABLE 0x2c4 32 #define mmPIPE1_PG_STATUS 0x2c5 33 #define mmPIPE2_PG_CONFIG 0x2c6 34 #define mmPIPE2_PG_ENABLE 0x2c7 35 #define mmPIPE2_PG_STATUS 0x2c8 36 #define mmPIPE3_PG_CONFIG 0x2c9 [all …]
|
/linux/arch/arm64/boot/dts/exynos/ |
H A D | exynos5433.dtsi | 48 #clock-cells = <0>; 53 #size-cells = <0>; 91 reg = <0x100>; 96 i-cache-size = <0x8000>; 99 d-cache-size = <0x8000>; 109 reg = <0x101>; 112 i-cache-size = <0x8000>; 115 d-cache-size = <0x8000>; 125 reg = <0x102>; 128 i-cache-size = <0x8000>; [all …]
|
/linux/sound/soc/mediatek/mt8195/ |
H A D | mt8195-reg.h | 13 #define AFE_SRAM_BASE (0x10880000) 14 #define AFE_SRAM_SIZE (0x10000) 16 #define AUDIO_TOP_CON0 (0x0000) 17 #define AUDIO_TOP_CON1 (0x0004) 18 #define AUDIO_TOP_CON2 (0x0008) 19 #define AUDIO_TOP_CON3 (0x000c) 20 #define AUDIO_TOP_CON4 (0x0010) 21 #define AUDIO_TOP_CON5 (0x0014) 22 #define AUDIO_TOP_CON6 (0x0018) 23 #define AFE_MAS_HADDR_MSB (0x0020) [all …]
|
/linux/sound/soc/mediatek/mt8188/ |
H A D | mt8188-reg.h | 14 #define AUDIO_TOP_CON0 (0x0000) 15 #define AUDIO_TOP_CON1 (0x0004) 16 #define AUDIO_TOP_CON2 (0x0008) 17 #define AUDIO_TOP_CON3 (0x000c) 18 #define AUDIO_TOP_CON4 (0x0010) 19 #define AUDIO_TOP_CON5 (0x0014) 20 #define AUDIO_TOP_CON6 (0x0018) 21 #define AFE_MAS_HADDR_MSB (0x0020) 22 #define AFE_MEMIF_ONE_HEART (0x0024) 23 #define AFE_MUX_SEL_CFG (0x0044) [all …]
|
/linux/drivers/net/ethernet/mediatek/ |
H A D | mtk_eth_soc.c | 35 module_param_named(msg_level, mtk_msg_level, int, 0); 36 MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)"); 46 .tx_irq_mask = 0x1a1c, 47 .tx_irq_status = 0x1a18, 49 .rx_ptr = 0x0900, 50 .rx_cnt_cfg = 0x0904, 51 .pcrx_ptr = 0x0908, 52 .glo_cfg = 0x0a04, 53 .rst_idx = 0x0a08, 54 .delay_irq = 0x0a0c, [all …]
|
/linux/drivers/gpu/drm/amd/include/asic_reg/gc/ |
H A D | gc_11_5_0_offset.h | 29 // base address: 0x4980 30 …SDMA0_DEC_START 0x0000 31 …e regSDMA0_DEC_START_BASE_IDX 0 32 …SDMA0_F32_MISC_CNTL 0x000b 33 …e regSDMA0_F32_MISC_CNTL_BASE_IDX 0 34 …SDMA0_UCODE_VERSION 0x000d 35 …e regSDMA0_UCODE_VERSION_BASE_IDX 0 36 …SDMA0_GLOBAL_TIMESTAMP_LO 0x000f 37 …e regSDMA0_GLOBAL_TIMESTAMP_LO_BASE_IDX 0 38 …SDMA0_GLOBAL_TIMESTAMP_HI 0x0010 [all …]
|
H A D | gc_10_1_0_offset.h | 24 …SQ_DEBUG_STS_GLOBAL 0x10A9 25 …ne mmSQ_DEBUG_STS_GLOBAL_BASE_IDX 0 26 …SQ_DEBUG_STS_GLOBAL2 0x10B0 27 …ne mmSQ_DEBUG_STS_GLOBAL2_BASE_IDX 0 30 // base address: 0x4980 31 …SDMA0_DEC_START 0x0000 32 …ne mmSDMA0_DEC_START_BASE_IDX 0 33 …SDMA0_PG_CNTL 0x0016 34 …ne mmSDMA0_PG_CNTL_BASE_IDX 0 35 …SDMA0_PG_CTX_LO 0x0017 [all …]
|
H A D | gc_11_0_0_offset.h | 29 // base address: 0x4980 30 …SDMA0_DEC_START 0x0000 31 …e regSDMA0_DEC_START_BASE_IDX 0 32 …SDMA0_F32_MISC_CNTL 0x000b 33 …e regSDMA0_F32_MISC_CNTL_BASE_IDX 0 34 …SDMA0_GLOBAL_TIMESTAMP_LO 0x000f 35 …e regSDMA0_GLOBAL_TIMESTAMP_LO_BASE_IDX 0 36 …SDMA0_GLOBAL_TIMESTAMP_HI 0x0010 37 …e regSDMA0_GLOBAL_TIMESTAMP_HI_BASE_IDX 0 38 …SDMA0_POWER_CNTL 0x001a [all …]
|
H A D | gc_12_0_0_offset.h | 29 // base address: 0x4980 30 …SDMA0_DEC_START 0x0000 31 …e regSDMA0_DEC_START_BASE_IDX 0 32 …SDMA0_MCU_MISC_CNTL 0x0001 33 …e regSDMA0_MCU_MISC_CNTL_BASE_IDX 0 34 …SDMA0_UCODE_REV 0x0003 35 …e regSDMA0_UCODE_REV_BASE_IDX 0 36 …SDMA0_GLOBAL_TIMESTAMP_LO 0x0005 37 …e regSDMA0_GLOBAL_TIMESTAMP_LO_BASE_IDX 0 38 …SDMA0_GLOBAL_TIMESTAMP_HI 0x0006 [all …]
|
H A D | gc_11_0_3_offset.h | 29 // base address: 0x4980 30 …SDMA0_DEC_START 0x0000 31 …e regSDMA0_DEC_START_BASE_IDX 0 32 …SDMA0_F32_MISC_CNTL 0x000b 33 …e regSDMA0_F32_MISC_CNTL_BASE_IDX 0 34 …SDMA0_GLOBAL_TIMESTAMP_LO 0x000f 35 …e regSDMA0_GLOBAL_TIMESTAMP_LO_BASE_IDX 0 36 …SDMA0_GLOBAL_TIMESTAMP_HI 0x0010 37 …e regSDMA0_GLOBAL_TIMESTAMP_HI_BASE_IDX 0 38 …SDMA0_POWER_CNTL 0x001a [all …]
|
H A D | gc_10_3_0_offset.h | 25 …SQ_DEBUG_STS_GLOBAL 0x10A9 26 …ne mmSQ_DEBUG_STS_GLOBAL_BASE_IDX 0 27 …SQ_DEBUG_STS_GLOBAL2 0x10B0 28 …ne mmSQ_DEBUG_STS_GLOBAL2_BASE_IDX 0 29 …SQ_DEBUG 0x10B1 30 …ne mmSQ_DEBUG_BASE_IDX 0 33 // base address: 0x4980 34 …SDMA0_DEC_START 0x0000 35 …ne mmSDMA0_DEC_START_BASE_IDX 0 36 …SDMA0_GLOBAL_TIMESTAMP_LO 0x000f [all …]
|