/linux/drivers/gpu/drm/vmwgfx/device_include/ |
H A D | svga_escape.h | 38 #define SVGA_ESCAPE_NSID_VMWARE 0x00000000 39 #define SVGA_ESCAPE_NSID_DEVEL 0xFFFFFFFF 41 #define SVGA_ESCAPE_VMWARE_MAJOR_MASK 0xFFFF0000 43 #define SVGA_ESCAPE_VMWARE_HINT 0x00030000 44 #define SVGA_ESCAPE_VMWARE_HINT_FULLSCREEN 0x00030001
|
/linux/Documentation/devicetree/bindings/thermal/ |
H A D | qoriq-thermal.yaml | 20 Register (IPBRR0) at offset 0x0BF8. 24 0x01900102 T1040 82 reg = <0xf0000 0x1000>; 83 interrupts = <18 2 0 0>; 84 fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; 85 fsl,tmu-calibration = <0x00000000 0x00000025>, 86 <0x00000001 0x00000028>, 87 <0x00000002 0x0000002d>, 88 <0x00000003 0x00000031>, 89 <0x00000004 0x00000036>, [all …]
|
/linux/include/soc/bcm2835/ |
H A D | raspberrypi-firmware.h | 15 RPI_FIRMWARE_STATUS_REQUEST = 0, 16 RPI_FIRMWARE_STATUS_SUCCESS = 0x80000000, 17 RPI_FIRMWARE_STATUS_ERROR = 0x80000001, 37 RPI_FIRMWARE_PROPERTY_END = 0, 38 RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, 40 RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, 41 RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, 43 RPI_FIRMWARE_GET_BOARD_MODEL = 0x00010001, 44 RPI_FIRMWARE_GET_BOARD_REVISION = 0x00010002, 45 RPI_FIRMWARE_GET_BOARD_MAC_ADDRESS = 0x00010003, [all …]
|
/linux/arch/arm64/boot/dts/qcom/ |
H A D | apq8096-ifc6640.dts | 16 qcom,msm-id = <291 0x00030001>; 17 qcom,board-id = <0x00010018 0>; 87 pinctrl-0 = <&blsp2_uart2_2pins_default>; 127 regulators-0 {
|
/linux/include/uapi/scsi/fc/ |
H A D | fc_els.h | 20 * ELS Command codes - byte 0 of the frame payload 23 ELS_LS_RJT = 0x01, /* ESL reject */ 24 ELS_LS_ACC = 0x02, /* ESL Accept */ 25 ELS_PLOGI = 0x03, /* N_Port login */ 26 ELS_FLOGI = 0x04, /* F_Port login */ 27 ELS_LOGO = 0x05, /* Logout */ 28 ELS_ABTX = 0x06, /* Abort exchange - obsolete */ 29 ELS_RCS = 0x07, /* read connection status */ 30 ELS_RES = 0x08, /* read exchange status block */ 31 ELS_RSS = 0x09, /* read sequence status block */ [all …]
|
/linux/arch/powerpc/boot/dts/fsl/ |
H A D | t1023si-post.dtsi | 39 alloc-ranges = <0 0 0x10000 0>; 44 alloc-ranges = <0 0 0x10000 0>; 49 alloc-ranges = <0 0 0x10000 0>; 56 interrupts = <25 2 0 0>; 64 bus-range = <0x0 0xff>; 65 interrupts = <20 2 0 0>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 73 interrupts = <20 2 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
H A D | t1040si-post.dtsi | 39 alloc-ranges = <0 0 0x10000 0>; 44 alloc-ranges = <0 0 0x10000 0>; 49 alloc-ranges = <0 0 0x10000 0>; 56 interrupts = <25 2 0 0>; 64 bus-range = <0x0 0xff>; 65 interrupts = <20 2 0 0>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 73 interrupts = <20 2 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
/linux/drivers/s390/char/ |
H A D | sclp_cmd.c | 34 #define SCLP_CMDW_ASSIGN_STORAGE 0x000d0001 35 #define SCLP_CMDW_UNASSIGN_STORAGE 0x000c0001 46 return sclp_sync_request_timeout(cmd, sccb, 0); in sclp_sync_request() 75 pr_warn("sync request failed (cmd=0x%08x, status=0x%02x)\n", in sclp_sync_request_timeout() 88 #define SCLP_CMDW_CONFIGURE_CPU 0x00110001 89 #define SCLP_CMDW_DECONFIGURE_CPU 0x00100001 104 sccb->header.control_mask[2] = 0x80; in _sclp_get_core_info() 109 if (sccb->header.response_code != 0x0010) { in _sclp_get_core_info() 110 pr_warn("readcpuinfo failed (response=0x%04x)\n", in _sclp_get_core_info() 144 case 0x0020: in do_core_configure() [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | fsl-ls1012a.dtsi | 32 #size-cells = <0>; 34 cpu0: cpu@0 { 37 reg = <0x0>; 38 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 54 arm,psci-suspend-param = <0x0>; 63 #clock-cells = <0>; 70 #clock-cells = <0>; 92 reg = <0x0 0x1401000 0 0x1000>, /* GICD */ 93 <0x0 0x1402000 0 0x2000>, /* GICC */ 94 <0x0 0x1404000 0 0x2000>, /* GICH */ [all …]
|
H A D | fsl-ls1088a.dtsi | 27 #size-cells = <0>; 30 cpu0: cpu@0 { 33 reg = <0x0>; 34 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 42 reg = <0x1>; 43 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 51 reg = <0x2>; 52 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 60 reg = <0x3>; 61 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
H A D | fsl-ls1043a.dtsi | 37 #size-cells = <0>; 45 cpu0: cpu@0 { 48 reg = <0x0>; 49 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 58 reg = <0x1>; 59 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 68 reg = <0x2>; 69 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 78 reg = <0x3>; 79 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
H A D | fsl-ls1046a.dtsi | 38 #size-cells = <0>; 40 cpu0: cpu@0 { 43 reg = <0x0>; 44 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 53 reg = <0x1>; 54 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 63 reg = <0x2>; 64 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 73 reg = <0x3>; 74 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
H A D | fsl-ls208xa.dtsi | 33 #size-cells = <0>; 38 reg = <0x00000000 0x80000000 0 0x80000000>; 44 #clock-cells = <0>; 51 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ 52 <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ 53 <0x0 0x0c0c0000 0 0x2000>, /* GICC */ 54 <0x0 0x0c0d0000 0 0x1000>, /* GICH */ 55 <0x0 0x0c0e0000 0 0x20000>; /* GICV */ 67 reg = <0x0 0x6020000 0 0x20000>; 73 reg = <0x0 0x1e60000 0x0 0x4>; [all …]
|
H A D | fsl-ls1028a.dtsi | 23 #size-cells = <0>; 25 cpu0: cpu@0 { 28 reg = <0x0>; 30 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 31 i-cache-size = <0xc000>; 34 d-cache-size = <0x8000>; 45 reg = <0x1>; 47 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 48 i-cache-size = <0xc000>; 51 d-cache-size = <0x8000>; [all …]
|
H A D | imx8mq.dtsi | 47 #clock-cells = <0>; 54 #clock-cells = <0>; 61 #clock-cells = <0>; 68 #clock-cells = <0>; 75 #clock-cells = <0>; 82 #clock-cells = <0>; 89 #clock-cells = <0>; 96 #clock-cells = <0>; 103 #size-cells = <0>; 105 A53_0: cpu@0 { [all …]
|
/linux/fs/dlm/ |
H A D | dlm_internal.h | 73 } while (0) 80 } while (0) 87 } while (0) 177 * lkb_nodeid: when the lkb is a local copy, nodeid is 0; when the lkb 202 #define DLM_DFL_USER_BIT 0 207 #define DLM_CB_CAST 0x00000001 208 #define DLM_CB_BAST 0x00000002 302 * res_master_nodeid is "normal": 0 is unset/invalid, non-zero is the real 355 #define R_REQUEST 0x00000001 356 #define R_RECEIVE_REQUEST 0x00000002 [all …]
|
/linux/arch/arm/boot/dts/nxp/ls/ |
H A D | ls1021a.dtsi | 31 #size-cells = <0>; 36 reg = <0xf00>; 37 clocks = <&clockgen 1 0>; 44 reg = <0xf01>; 45 clocks = <&clockgen 1 0>; 50 memory@0 { 52 reg = <0x0 0x0 0x0 0x0>; 57 #clock-cells = <0>; 80 offset = <0xb0>; 81 mask = <0x02>; [all …]
|
/linux/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ |
H A D | vega10_powertune.c | 39 …L__MAX_POWER_DELTA_HI_MASK, DIDT_SQ_TUNING_CTRL__MAX_POWER_DELTA_HI__SHIFT, 0x3853 }, 40 …L__MAX_POWER_DELTA_LO_MASK, DIDT_SQ_TUNING_CTRL__MAX_POWER_DELTA_LO__SHIFT, 0x3153 }, 43 …L__MAX_POWER_DELTA_HI_MASK, DIDT_TD_TUNING_CTRL__MAX_POWER_DELTA_HI__SHIFT, 0x0dde }, 44 …L__MAX_POWER_DELTA_LO_MASK, DIDT_TD_TUNING_CTRL__MAX_POWER_DELTA_LO__SHIFT, 0x0dde }, 47 …RL__MAX_POWER_DELTA_HI_MASK, DIDT_TCP_TUNING_CTRL__MAX_POWER_DELTA_HI__SHIFT, 0x3dde }, 48 …RL__MAX_POWER_DELTA_LO_MASK, DIDT_TCP_TUNING_CTRL__MAX_POWER_DELTA_LO__SHIFT, 0x3dde }, 51 …L__MAX_POWER_DELTA_HI_MASK, DIDT_DB_TUNING_CTRL__MAX_POWER_DELTA_HI__SHIFT, 0x3dde }, 52 …L__MAX_POWER_DELTA_LO_MASK, DIDT_DB_TUNING_CTRL__MAX_POWER_DELTA_LO__SHIFT, 0x3dde }, 54 { 0xFFFFFFFF } /* End of list */ 63 …DT_SQ_CTRL3__GC_DIDT_ENABLE_MASK, DIDT_SQ_CTRL3__GC_DIDT_ENABLE__SHIFT, 0x0000 }, [all …]
|
/linux/drivers/net/ethernet/sfc/siena/ |
H A D | mcdi_pcol.h | 36 #define MC_SMEM_P0_DOORBELL_OFST 0x000 37 #define MC_SMEM_P1_DOORBELL_OFST 0x004 39 #define MC_SMEM_P0_PDU_OFST 0x008 40 #define MC_SMEM_P1_PDU_OFST 0x108 41 #define MC_SMEM_PDU_LEN 0x100 42 #define MC_SMEM_P0_PTP_TIME_OFST 0x7f0 43 #define MC_SMEM_P0_STATUS_OFST 0x7f8 44 #define MC_SMEM_P1_STATUS_OFST 0x7fc 48 #define MC_STATUS_DWORD_REBOOT (0xb007b007) 49 #define MC_STATUS_DWORD_ASSERT (0xdeaddead) [all …]
|
/linux/drivers/net/ethernet/sfc/ |
H A D | mcdi_pcol.h | 36 #define MC_SMEM_P0_DOORBELL_OFST 0x000 37 #define MC_SMEM_P1_DOORBELL_OFST 0x004 39 #define MC_SMEM_P0_PDU_OFST 0x008 40 #define MC_SMEM_P1_PDU_OFST 0x108 41 #define MC_SMEM_PDU_LEN 0x100 42 #define MC_SMEM_P0_PTP_TIME_OFST 0x7f0 43 #define MC_SMEM_P0_STATUS_OFST 0x7f8 44 #define MC_SMEM_P1_STATUS_OFST 0x7fc 48 #define MC_STATUS_DWORD_REBOOT (0xb007b007) 49 #define MC_STATUS_DWORD_ASSERT (0xdeaddead) [all …]
|
/linux/drivers/net/wireless/realtek/rtw89/ |
H A D | rtw8852c_table.c | 10 {0xF0FF0000, 0x00000000}, 11 {0xF03300FF, 0x00000001}, 12 {0xF03400FF, 0x00000002}, 13 {0xF03500FF, 0x00000003}, 14 {0xF03600FF, 0x00000004}, 15 {0x70C, 0x00000020}, 16 {0x704, 0x601E0100}, 17 {0x4000, 0x00000000}, 18 {0x4004, 0xCA014000}, 19 {0x4008, 0xC751D4F0}, [all …]
|