Searched +full:0 +full:v_ap (Results 1 – 6 of 6) sorted by relevance
53 reg = <0x0 0x20000000 0x0 0xc0000000>;67 gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;88 i2c_max98504: i2c-gpio-0 {91 scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;94 #size-cells = <0>;98 reg = <0x31>;123 i2s-controller = <&i2s0 0>, <&i2s1 0>;150 pulldown-ohm = <0>;151 io-channels = <&adc 0>;158 pulldown-ohm = <0>;[all …]
38 assigned-clock-parents = <0>, <0>,54 panel@0 {56 reg = <0>;59 reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;65 regulator-name = "TSP_VDD_1.8V_AP";
39 assigned-clock-parents = <0>, <0>,56 panel@0 {58 reg = <0>;61 reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;71 reg = <0x20>;80 regulator-name = "TSP_VDD_1.85V_AP";86 regulator-name = "VCC_3.0V_MOTOR_AP";
39 reg = <0x0204f000 0x1000>;45 clock-frequency = <0>;136 pinctrl-0 = <&gpio_keys>;171 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;175 #size-cells = <0>;182 pinctrl-0 = <&max77693_irq>;183 reg = <0x66>;196 #size-cells = <0>;198 port@0 {199 reg = <0>;[all …]
33 reg = <0x40000000 0x3fc00000>;46 linux,initrd-start = <0x42000000>;47 linux,initrd-end = <0x42800000>;53 linux,usable-memory-range = <0x40000000 0x3fc00000>;58 reg = <0x0204F000 0x1000>;64 clock-frequency = <0>;76 pinctrl-0 = <&gpio_keys>;128 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;132 #size-cells = <0>;136 reg = <0x66>;[all …]
26 reg = <0x40000000 0x7fc00000>;41 reg = <0x0204f000 0x1000>;47 clock-frequency = <0>;59 pinctrl-0 = <&gpio_keys>;88 pinctrl-0 = <&tsp_reg_gpio_1>;98 pinctrl-0 = <&tsp_reg_gpio_2>;108 pinctrl-0 = <&tsp_reg_gpio_3>;119 pinctrl-0 = <&lcd_enable>;128 pinctrl-0 = <&wifi_reset>;149 #size-cells = <0>;[all …]