Lines Matching +full:0 +full:v_ap
53 reg = <0x0 0x20000000 0x0 0xc0000000>;
67 gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
88 i2c_max98504: i2c-gpio-0 {
91 scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
94 #size-cells = <0>;
98 reg = <0x31>;
123 i2s-controller = <&i2s0 0>, <&i2s1 0>;
150 pulldown-ohm = <0>;
151 io-channels = <&adc 0>;
158 pulldown-ohm = <0>;
160 #thermal-sensor-cells = <0>;
167 pulldown-ohm = <0>;
255 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
280 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
299 assigned-clock-rates = <0>, <333000000>;
335 #size-cells = <0>;
337 port@0 {
338 reg = <0>;
354 pinctrl-0 = <&te_irq>;
363 hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
371 #size-cells = <0>;
373 port@0 {
374 reg = <0>;
397 reg = <0x66>;
410 regulator-name = "VDD_ALIVE_0.9V_AP";
417 regulator-name = "VDDQ_MMC2_2.8V_AP";
427 regulator-name = "VDD1_E_1.8V_AP";
434 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
444 regulator-name = "VDD10_DPLL_1.0V_AP";
454 regulator-name = "VDD10_MIPI2L_1.0V_AP";
463 regulator-name = "VDD18_MIPI2L_1.8V_AP";
473 regulator-name = "VDD18_LLI_1.8V_AP";
483 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
493 regulator-name = "VDD33_USB30_3.0V_AP";
502 regulator-name = "VDD_INT_M_1.0V_AP";
512 regulator-name = "VDD_KFC_M_1.1V_AP";
519 regulator-name = "VDD_G3D_M_0.95V_AP";
529 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
539 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
556 regulator-name = "V_TFLASH_2.8V_AP";
562 regulator-name = "V_CODEC_1.8V_AP";
575 regulator-name = "VCC_2.8V_AP";
588 regulator-name = "CAM_IO_1.8V_AP";
594 regulator-name = "CAM_SEN_CORE_1.05V_AP";
612 regulator-name = "CAM_AF_2.8V_AP";
618 regulator-name = "VCC_3.0V_LCD_AP";
636 regulator-name = "TSP_AVDD_3.3V_AP";
649 regulator-name = "VTOUCH_1.8V_AP";
674 regulator-name = "VSIL_1.0V";
705 regulator-name = "VDD_MIF_0.9V_AP";
715 regulator-name = "VDD_EGL_1.0V_AP";
725 regulator-name = "VDD_KFC_1.0V_AP";
735 regulator-name = "VDD_INT_0.95V_AP";
745 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
755 regulator-name = "VDD_G3D_0.9V_AP";
765 regulator-name = "VDD_MEM1_1.2V_AP";
772 regulator-name = "VDD_LLDO_1.35V_AP";
779 regulator-name = "VDD_MLDO_2.0V_AP";
800 reg = <0x27>;
813 reg = <0x49>;
826 reg = <0x39>;
832 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
833 clocks = <&pmu_system_controller 0>;
838 #size-cells = <0>;
840 port@0 {
841 reg = <0>;
864 reg = <0x66>;
877 #size-cells = <0>;
879 port@0 {
882 * port@0 which is a required property. The ports
886 reg = <0>;
932 pwms = <&pwm 0 33670 0>;
960 samsung,dw-mshc-sdr-timing = <0 4>;
961 samsung,dw-mshc-ddr-timing = <0 2>;
962 samsung,dw-mshc-hs400-timing = <0 3>;
964 fifo-depth = <0x80>;
966 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
980 samsung,dw-mshc-sdr-timing = <0 4>;
981 samsung,dw-mshc-ddr-timing = <0 2>;
982 fifo-depth = <0x80>;
984 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
991 pinctrl-0 = <&pcie_bus &pcie_wlanen>;
998 assigned-clock-rates = <0>, <100000000>;
999 interrupt-map-mask = <0 0 0 0>;
1000 interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
1027 pinctrl-0 = <&initial_alive>;
1030 PIN_IN(gpa0-0, DOWN, FAST_SR1);
1039 PIN_IN(gpa1-0, UP, FAST_SR1);
1048 PIN_IN(gpa2-0, NONE, FAST_SR1);
1057 PIN_IN(gpa3-0, DOWN, FAST_SR1);
1066 PIN_IN(gpf1-0, NONE, FAST_SR1);
1074 PIN_IN(gpf2-0, DOWN, FAST_SR1);
1079 PIN_IN(gpf3-0, DOWN, FAST_SR1);
1084 PIN_IN(gpf4-0, DOWN, FAST_SR1);
1093 PIN_IN(gpf5-0, DOWN, FAST_SR1);
1111 pinctrl-0 = <&initial_cpif>;
1114 PIN_IN(gpv6-0, DOWN, FAST_SR1);
1121 pinctrl-0 = <&initial_ese>;
1124 samsung,pins = "gpj2-0";
1138 pinctrl-0 = <&initial_fsys>;
1141 PIN_IN(gpr3-0, NONE, FAST_SR1);
1151 pinctrl-0 = <&initial_imem>;
1154 PIN_IN(gpf0-0, UP, FAST_SR1);
1167 pinctrl-0 = <&initial_nfc>;
1176 pinctrl-0 = <&initial_peric>;
1179 PIN_IN(gpv7-0, DOWN, FAST_SR1);
1199 PIN_OT(gpg0-0, NONE, FAST_SR1);
1204 PIN_IN(gpd4-0, NONE, FAST_SR1);
1214 PIN_IN(gpg1-0, DOWN, FAST_SR1);
1220 PIN_IN(gpg2-0, DOWN, FAST_SR1);
1223 PIN_IN(gpg3-0, DOWN, FAST_SR1);
1231 pinctrl-0 = <&initial_touch>;
1239 pinctrl-0 = <&pwm0_out>;
1249 assigned-clocks = <&pmu_system_controller 0>;
1263 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
1275 wm5110: audio-codec@0 {
1277 reg = <0x0>;
1281 clocks = <&pmu_system_controller 0>,
1291 wlf,micd-bias-start-time = <0x1>;
1292 wlf,micd-rate = <0x7>;
1293 wlf,micd-dbtime = <0x2>;
1295 wlf,micd-configs = <0x0 1 0>;
1297 wlf,gpsw = <0x1>;
1298 wlf,inmode = <2 0 2 0>;
1301 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1313 samsung,spi-feedback-delay = <0>;
1322 irled@0 {
1324 reg = <0x0>;
1331 samsung,spi-feedback-delay = <0>;