Lines Matching +full:0 +full:v_ap
33 reg = <0x40000000 0x3fc00000>;
46 linux,initrd-start = <0x42000000>;
47 linux,initrd-end = <0x42800000>;
53 linux,usable-memory-range = <0x40000000 0x3fc00000>;
58 reg = <0x0204F000 0x1000>;
64 clock-frequency = <0>;
76 pinctrl-0 = <&gpio_keys>;
128 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
132 #size-cells = <0>;
136 reg = <0x66>;
140 pinctrl-0 = <&max77693_irq>;
178 #size-cells = <0>;
182 reg = <0x36>;
186 pinctrl-0 = <&max77693_fuel_irq>;
199 #size-cells = <0>;
203 reg = <0x2e>;
205 mount-matrix = "-1", "0", "0",
206 "0", "1", "0",
207 "0", "0", "-1";
217 #size-cells = <0>;
228 #size-cells = <0>;
232 reg = <0x2c>;
235 dev-ctrl = /bits/ 8 <0x80>;
236 init-brt = /bits/ 8 <0x78>; /* 120 */
241 pwms = <&pwm 1 78770 0>;
245 rom-addr = /bits/ 8 <0xa3>;
246 rom-val = /bits/ 8 <0x5e>;
250 rom-addr = /bits/ 8 <0xa5>;
251 rom-val = /bits/ 8 <0x34>;
255 rom-addr = /bits/ 8 <0xa7>;
256 rom-val = /bits/ 8 <0xfa>;
273 pinctrl-0 = <&backlight_reset>;
284 pinctrl-0 = <&lcd_en>;
338 sound-dai = <&i2s0 0>;
426 panel@0 {
428 reg = <0>;
431 pinctrl-0 = <&lcd_nrst>;
460 pinctrl-0 = <&i2c1_bus>;
467 reg = <0x19>;
470 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
475 mount-matrix = "-1", "0", "0",
476 "0", "1", "0",
477 "0", "0", "-1";
483 samsung,i2c-slave-addr = <0x10>;
485 pinctrl-0 = <&i2c3_bus>;
492 reg = <0x48>;
505 samsung,i2c-slave-addr = <0x10>;
507 pinctrl-0 = <&i2c4_bus>;
513 reg = <0x1a>;
514 clocks = <&pmu_system_controller 0>;
523 #sound-dai-cells = <0>;
525 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
526 0x0 0x8000 0x0 0x0 0x0>;
527 wlf,micbias-cfg = <0x25 0x2f>;
548 samsung,i2c-slave-addr = <0x10>;
550 pinctrl-0 = <&i2c7_bus>;
556 reg = <0x66>;
560 pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
565 s5m8767,pmic-buck-dvs-gpios = <&gpm3 0 GPIO_ACTIVE_HIGH>,
590 regulator-name = "VALIVE_1.0V_AP";
599 regulator-name = "VM1M2_1.2V_AP";
608 regulator-name = "VCC_1.8V_AP";
623 regulator-name = "VMIPI_1.0V";
644 regulator-name = "VUOTG_3.0V";
661 regulator-name = "VHSIC_1.0V";
671 regulator-name = "VCC_2.8V_AP";
778 regulator-name = "VMEM_1.2V_AP";
809 pinctrl-0 = <&i2s0_bus>;
820 samsung,dw-mshc-ciu-div = <0>;
823 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
833 pinctrl-0 = <&sleep0>;
855 PIN_SLP(gpa0-0, INPUT, NONE);
864 PIN_SLP(gpa1-0, INPUT, DOWN);
871 PIN_SLP(gpb-0, INPUT, NONE);
880 PIN_SLP(gpc0-0, INPUT, DOWN);
886 PIN_SLP(gpc1-0, INPUT, DOWN);
892 PIN_SLP(gpd0-0, INPUT, DOWN);
897 PIN_SLP(gpd1-0, INPUT, DOWN);
902 PIN_SLP(gpf0-0, INPUT, DOWN);
911 PIN_SLP(gpf1-0, INPUT, DOWN);
920 PIN_SLP(gpf2-0, INPUT, DOWN);
929 PIN_SLP(gpf3-0, INPUT, DOWN);
936 PIN_SLP(gpj0-0, INPUT, DOWN);
945 PIN_SLP(gpj1-0, OUT0, NONE);
955 pinctrl-0 = <&sleep1>;
1005 samsung,pins = "gpm3-0", "gpm3-1", "gpm3-2";
1019 PIN_SLP(gpk0-0, PREV, NONE);
1027 PIN_SLP(gpk1-0, INPUT, DOWN);
1035 PIN_SLP(gpk2-0, INPUT, DOWN);
1043 PIN_SLP(gpk3-0, OUT0, NONE);
1051 PIN_SLP(gpl0-0, INPUT, DOWN);
1058 PIN_SLP(gpl1-0, INPUT, DOWN);
1060 PIN_SLP(gpl2-0, INPUT, DOWN);
1069 PIN_SLP(gpm0-0, PREV, NONE);
1078 PIN_SLP(gpm1-0, INPUT, DOWN);
1086 PIN_SLP(gpm2-0, INPUT, NONE);
1092 PIN_SLP(gpm3-0, PREV, NONE);
1101 PIN_SLP(gpm4-0, INPUT, DOWN);
1110 PIN_SLP(gpy0-0, INPUT, DOWN);
1117 PIN_SLP(gpy1-0, INPUT, DOWN);
1122 PIN_SLP(gpy2-0, PREV, NONE);
1129 PIN_SLP(gpy3-0, INPUT, DOWN);
1138 PIN_SLP(gpy4-0, INPUT, DOWN);
1147 PIN_SLP(gpy5-0, INPUT, DOWN);
1156 PIN_SLP(gpy6-0, INPUT, DOWN);
1169 pinctrl-0 = <&sleep2>;
1172 PIN_SLP(gpz-0, INPUT, DOWN);
1184 pinctrl-0 = <&sleep3>;
1187 PIN_SLP(gpv0-0, INPUT, DOWN);
1196 PIN_SLP(gpv1-0, INPUT, DOWN);
1205 PIN_SLP(gpv2-0, INPUT, DOWN);
1214 PIN_SLP(gpv3-0, INPUT, DOWN);
1223 PIN_SLP(gpv4-0, INPUT, DOWN);
1229 assigned-clocks = <&pmu_system_controller 0>;
1234 pinctrl-0 = <&pwm1_out>;
1257 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1265 #size-cells = <0>;
1271 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1285 pinctrl-0 = <&uart0_data &uart0_fctl>;
1291 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;