xref: /linux/drivers/gpu/drm/panel/Kconfig (revision 3f1c07fc21c68bd3bd2df9d2c9441f6485e934d9) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TD4320
71	tristate "BOE TD4320 DSI panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for BOE TD4320 1080x2340
77	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
78
79config DRM_PANEL_BOE_TH101MB31UIG002_28A
80	tristate "Boe TH101MB31UIG002-28A panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for Boe
86	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
87	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
88	  interface to the host and has a built-in LED backlight.
89
90config DRM_PANEL_BOE_TV101WUM_NL6
91	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
97	  45NA WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_BOE_TV101WUM_LL2
100	tristate "BOE TV101WUM LL2 1200x1920 panel"
101	depends on OF
102	depends on DRM_MIPI_DSI
103	depends on BACKLIGHT_CLASS_DEVICE
104	help
105	  Say Y here if you want to support for BOE TV101WUM-LL2
106	  WUXGA PANEL DSI Video Mode panel
107
108config DRM_PANEL_EBBG_FT8719
109	tristate "EBBG FT8719 panel driver"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y here if you want to enable support for the EBBG FT8719
115	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
116	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
117	  interface to the host.
118
119config DRM_PANEL_ELIDA_KD35T133
120	tristate "Elida KD35T133 panel driver"
121	depends on OF
122	depends on DRM_MIPI_DSI
123	depends on BACKLIGHT_CLASS_DEVICE
124	help
125	  Say Y here if you want to enable support for the Elida
126	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
127	  system interfaces.
128
129config DRM_PANEL_FEIXIN_K101_IM2BA02
130	tristate "Feixin K101 IM2BA02 panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
136	  4-lane 800x1280 MIPI DSI panel.
137
138config DRM_PANEL_FEIYANG_FY07024DI26A30D
139	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
140	depends on OF
141	depends on DRM_MIPI_DSI
142	depends on BACKLIGHT_CLASS_DEVICE
143	help
144	  Say Y if you want to enable support for panels based on the
145	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
146
147config DRM_PANEL_DSI_CM
148	tristate "Generic DSI command mode panels"
149	depends on OF
150	depends on DRM_MIPI_DSI
151	depends on BACKLIGHT_CLASS_DEVICE
152	help
153	  DRM panel driver for DSI command mode panels with support for
154	  embedded and external backlights.
155
156config DRM_PANEL_LVDS
157	tristate "Generic LVDS panel driver"
158	depends on OF
159	depends on BACKLIGHT_CLASS_DEVICE
160	select VIDEOMODE_HELPERS
161	help
162	  This driver supports LVDS panels that don't require device-specific
163	  handling of power supplies or control signals. It implements automatic
164	  backlight handling if the panel is attached to a backlight controller.
165
166config DRM_PANEL_HIMAX_HX8279
167	tristate "Himax HX8279-based panels"
168	depends on OF
169	depends on DRM_MIPI_DSI
170	depends on BACKLIGHT_CLASS_DEVICE
171	help
172	  Say Y if you want to enable support for panels based on the
173	  Himax HX8279 controller, such as the Startek KD070FHFID078
174	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
175	  and others.
176
177config DRM_PANEL_HIMAX_HX83102
178	tristate "Himax HX83102-based panels"
179	depends on OF
180	depends on DRM_MIPI_DSI
181	depends on BACKLIGHT_CLASS_DEVICE
182	help
183	  Say Y if you want to enable support for panels based on the
184	  Himax HX83102 controller.
185
186config DRM_PANEL_HIMAX_HX83112A
187	tristate "Himax HX83112A-based DSI panel"
188	depends on OF
189	depends on DRM_MIPI_DSI
190	depends on BACKLIGHT_CLASS_DEVICE
191	select DRM_KMS_HELPER
192	help
193	  Say Y here if you want to enable support for Himax HX83112A-based
194	  display panels, such as the one found in the Fairphone 4 smartphone.
195
196config DRM_PANEL_HIMAX_HX83112B
197	tristate "Himax HX83112B-based DSI panel"
198	depends on OF
199	depends on DRM_MIPI_DSI
200	depends on BACKLIGHT_CLASS_DEVICE
201	select DRM_KMS_HELPER
202	help
203	  Say Y here if you want to enable support for Himax HX83112B-based
204	  display panels, such as the one found in the Fairphone 3 smartphone.
205
206config DRM_PANEL_HIMAX_HX8394
207	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
208	depends on OF
209	depends on DRM_MIPI_DSI
210	depends on BACKLIGHT_CLASS_DEVICE
211	help
212	  Say Y if you want to enable support for panels based on the
213	  Himax HX8394 controller, such as the HannStar HSD060BHW4
214	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
215
216	  If M is selected the module will be called panel-himax-hx8394.
217
218config DRM_PANEL_HYDIS_HV101HD1
219	tristate "Hydis HV101HD1 panel"
220	depends on OF
221	depends on DRM_MIPI_DSI
222	depends on BACKLIGHT_CLASS_DEVICE
223	help
224	  Say Y here if you want to enable support for the Hydis HV101HD1
225	  2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT TF600T.
226	  HV101HD1 is a color active matrix TFT LCD module using amorphous
227	  silicon TFT's (Thin Film Transistors) as an active switching devices.
228
229	  If M is selected the module will be called panel-hydis-hv101hd1
230
231config DRM_PANEL_ILITEK_IL9322
232	tristate "Ilitek ILI9322 320x240 QVGA panels"
233	depends on OF && SPI
234	select REGMAP
235	help
236	  Say Y here if you want to enable support for Ilitek IL9322
237	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
238
239config DRM_PANEL_ILITEK_ILI9341
240	tristate "Ilitek ILI9341 240x320 QVGA panels"
241	depends on SPI
242	select DRM_KMS_HELPER
243	select DRM_GEM_DMA_HELPER
244	depends on BACKLIGHT_CLASS_DEVICE
245	select DRM_MIPI_DBI
246	help
247	  Say Y here if you want to enable support for Ilitek IL9341
248	  QVGA (240x320) RGB panels. support serial & parallel rgb
249	  interface.
250
251config DRM_PANEL_ILITEK_ILI9805
252	tristate "Ilitek ILI9805-based panels"
253	depends on OF
254	depends on DRM_MIPI_DSI
255	depends on BACKLIGHT_CLASS_DEVICE
256	help
257	  Say Y if you want to enable support for panels based on the
258	  Ilitek ILI9805 controller.
259
260config DRM_PANEL_ILITEK_ILI9806E
261	tristate "Ilitek ILI9806E-based panels"
262	depends on OF
263	depends on DRM_MIPI_DSI
264	depends on BACKLIGHT_CLASS_DEVICE
265	help
266	  Say Y if you want to enable support for panels based on the
267	  Ilitek ILI9806E controller.
268
269config DRM_PANEL_ILITEK_ILI9881C
270	tristate "Ilitek ILI9881C-based panels"
271	depends on OF
272	depends on DRM_MIPI_DSI
273	depends on BACKLIGHT_CLASS_DEVICE
274	help
275	  Say Y if you want to enable support for panels based on the
276	  Ilitek ILI9881c controller.
277
278config DRM_PANEL_ILITEK_ILI9882T
279	tristate "Ilitek ILI9882t-based panels"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y if you want to enable support for panels based on the
285	  Ilitek ILI9882t controller.
286
287config DRM_PANEL_INNOLUX_EJ030NA
288        tristate "Innolux EJ030NA 320x480 LCD panel"
289        depends on OF && SPI
290        select REGMAP_SPI
291        help
292          Say Y here to enable support for the Innolux/Chimei EJ030NA
293          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
294          and LDK handheld gaming consoles.
295
296config DRM_PANEL_INNOLUX_P079ZCA
297	tristate "Innolux P079ZCA panel"
298	depends on OF
299	depends on DRM_MIPI_DSI
300	depends on BACKLIGHT_CLASS_DEVICE
301	help
302	  Say Y here if you want to enable support for Innolux P079ZCA
303	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
304	  24 bit RGB per pixel. It provides a MIPI DSI interface to
305	  the host and has a built-in LED backlight.
306
307config DRM_PANEL_JADARD_JD9365DA_H3
308	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
309	depends on OF
310	depends on DRM_MIPI_DSI
311	depends on BACKLIGHT_CLASS_DEVICE
312	help
313	  Say Y here if you want to enable support for Jadard JD9365DA-H3
314	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
315	  800RGBx1280 dots at maximum.
316
317config DRM_PANEL_JDI_LPM102A188A
318	tristate "JDI LPM102A188A DSI panel"
319	depends on OF && GPIOLIB
320	depends on DRM_MIPI_DSI
321	depends on BACKLIGHT_CLASS_DEVICE
322	help
323	  Say Y here if you want to enable support for JDI LPM102A188A DSI
324	  command mode panel as found in Google Pixel C devices.
325	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
326	  to the host.
327
328config DRM_PANEL_JDI_LT070ME05000
329	tristate "JDI LT070ME05000 WUXGA DSI panel"
330	depends on OF
331	depends on DRM_MIPI_DSI
332	depends on BACKLIGHT_CLASS_DEVICE
333	help
334	  Say Y here if you want to enable support for JDI DSI video mode
335	  panel as found in Google Nexus 7 (2013) devices.
336	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
337	  24 bit per pixel.
338
339config DRM_PANEL_JDI_R63452
340	tristate "JDI R63452 Full HD DSI panel"
341	depends on OF
342	depends on DRM_MIPI_DSI
343	depends on BACKLIGHT_CLASS_DEVICE
344	help
345	  Say Y here if you want to enable support for the JDI R63452
346	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
347
348config DRM_PANEL_KHADAS_TS050
349	tristate "Khadas TS050 panel"
350	depends on OF
351	depends on DRM_MIPI_DSI
352	depends on BACKLIGHT_CLASS_DEVICE
353	help
354	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
355	  panel module. The panel has a 1080x1920 resolution and uses
356	  24 bit RGB per pixel. It provides a MIPI DSI interface to
357	  the host, a built-in LED backlight and touch controller.
358
359config DRM_PANEL_KINGDISPLAY_KD097D04
360	tristate "Kingdisplay kd097d04 panel"
361	depends on OF
362	depends on DRM_MIPI_DSI
363	depends on BACKLIGHT_CLASS_DEVICE
364	help
365	  Say Y here if you want to enable support for Kingdisplay kd097d04
366	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
367	  24 bit RGB per pixel. It provides a MIPI DSI interface to
368	  the host and has a built-in LED backlight.
369
370config DRM_PANEL_LEADTEK_LTK050H3146W
371	tristate "Leadtek LTK050H3146W panel"
372	depends on OF
373	depends on DRM_MIPI_DSI
374	depends on BACKLIGHT_CLASS_DEVICE
375	help
376	  Say Y here if you want to enable support for Leadtek LTK050H3146W
377	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
378	  24 bit RGB per pixel. It provides a MIPI DSI interface to
379	  the host and has a built-in LED backlight.
380
381config DRM_PANEL_LEADTEK_LTK500HD1829
382	tristate "Leadtek LTK500HD1829 panel"
383	depends on OF
384	depends on DRM_MIPI_DSI
385	depends on BACKLIGHT_CLASS_DEVICE
386	help
387	  Say Y here if you want to enable support for Kingdisplay kd097d04
388	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
389	  24 bit RGB per pixel. It provides a MIPI DSI interface to
390	  the host and has a built-in LED backlight.
391
392config DRM_PANEL_LINCOLNTECH_LCD197
393	tristate "Lincoln Technologies lcd197 panel"
394	depends on OF
395	depends on DRM_MIPI_DSI
396	depends on BACKLIGHT_CLASS_DEVICE
397	help
398	  Say Y here if you want to enable support for lincolntech lcd197
399	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
400	  24 bit RGB per pixel. It provides a MIPI DSI interface to
401	  the host.
402
403config DRM_PANEL_LG_LB035Q02
404	tristate "LG LB035Q024573 RGB panel"
405	depends on GPIOLIB && OF && SPI
406	help
407	  Say Y here if you want to enable support for the LB035Q02 RGB panel
408	  (found on the Gumstix Overo Palo35 board). To compile this driver as
409	  a module, choose M here.
410
411config DRM_PANEL_LG_LD070WX3
412	tristate "LG LD070WX3 MIPI DSI panel"
413	depends on OF
414	depends on DRM_MIPI_DSI
415	depends on BACKLIGHT_CLASS_DEVICE
416	select VIDEOMODE_HELPERS
417	help
418	  Say Y here if you want to enable support for the LD070WX3 MIPI DSI
419	  panel found in the NVIDIA Tegra Note 7 tablet.
420
421	  To compile this driver as a module, choose M here: the module will
422	  be called panel-lg-ld070wx3.
423
424config DRM_PANEL_LG_LG4573
425	tristate "LG4573 RGB/SPI panel"
426	depends on OF && SPI
427	select VIDEOMODE_HELPERS
428	help
429	  Say Y here if you want to enable support for LG4573 RGB panel.
430	  To compile this driver as a module, choose M here.
431
432config DRM_PANEL_LG_SW43408
433	tristate "LG SW43408 panel"
434	depends on OF
435	depends on DRM_MIPI_DSI
436	depends on BACKLIGHT_CLASS_DEVICE
437	select DRM_DISPLAY_DSC_HELPER
438	select DRM_DISPLAY_HELPER
439	help
440	  Say Y here if you want to enable support for LG sw43408 panel.
441	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
442	  pixel. It provides a MIPI DSI interface to the host and has a
443	  built-in LED backlight.
444
445config DRM_PANEL_MAGNACHIP_D53E6EA8966
446	tristate "Magnachip D53E6EA8966 DSI panel"
447	depends on OF && SPI
448	depends on DRM_MIPI_DSI
449	depends on BACKLIGHT_CLASS_DEVICE
450	select DRM_MIPI_DBI
451	help
452	  DRM panel driver for the Samsung AMS495QA01 panel controlled
453	  with the Magnachip D53E6EA8966 panel IC. This panel receives
454	  video data via DSI but commands via 9-bit SPI using DBI.
455
456config DRM_PANEL_MANTIX_MLAF057WE51
457	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
458	depends on OF
459	depends on DRM_MIPI_DSI
460	depends on BACKLIGHT_CLASS_DEVICE
461	help
462	  Say Y here if you want to enable support for the Mantix
463	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
464	  has a resolution of 720x1440 pixels, a built in backlight and touch
465	  controller.
466
467config DRM_PANEL_NEC_NL8048HL11
468	tristate "NEC NL8048HL11 RGB panel"
469	depends on GPIOLIB && OF && SPI
470	help
471	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
472	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
473	  as a module, choose M here.
474
475config DRM_PANEL_NEWVISION_NV3051D
476	tristate "NewVision NV3051D DSI panel"
477	depends on OF
478	depends on DRM_MIPI_DSI
479	depends on BACKLIGHT_CLASS_DEVICE
480	help
481	  This driver supports the NV3051D based panel found on the Anbernic
482	  RG353P and RG353V.
483
484config DRM_PANEL_NEWVISION_NV3052C
485	tristate "NewVision NV3052C RGB/SPI panel"
486	depends on OF && SPI
487	depends on BACKLIGHT_CLASS_DEVICE
488	select DRM_MIPI_DBI
489	help
490	  Say Y here if you want to enable support for the panels built
491	  around the NewVision NV3052C display controller.
492
493config DRM_PANEL_NOVATEK_NT35510
494	tristate "Novatek NT35510 RGB panel driver"
495	depends on OF
496	depends on DRM_MIPI_DSI
497	depends on BACKLIGHT_CLASS_DEVICE
498	help
499	  Say Y here if you want to enable support for the panels built
500	  around the Novatek NT35510 display controller, such as some
501	  Hydis panels.
502
503config DRM_PANEL_NOVATEK_NT35560
504	tristate "Novatek NT35560 DSI command mode panel"
505	depends on OF
506	depends on DRM_MIPI_DSI
507	depends on BACKLIGHT_CLASS_DEVICE
508	select VIDEOMODE_HELPERS
509	help
510	  Say Y here if you want to enable the Novatek NT35560 display
511	  controller. This panel supports DSI in both command and video
512	  mode. This supports several panels such as Sony ACX424AKM and
513	  ACX424AKP.
514
515config DRM_PANEL_NOVATEK_NT35950
516	tristate "Novatek NT35950 DSI panel"
517	depends on OF
518	depends on DRM_MIPI_DSI
519	depends on BACKLIGHT_CLASS_DEVICE
520	help
521	  Say Y here if you want to enable support for the panels built
522	  around the Novatek NT35950 display controller, such as some
523	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
524	  mobile phones.
525
526config DRM_PANEL_NOVATEK_NT36523
527	tristate "Novatek NT36523 panel driver"
528	depends on OF
529	depends on DRM_MIPI_DSI
530	depends on BACKLIGHT_CLASS_DEVICE
531	help
532	  Say Y here if you want to enable support for the panels built
533	  around the Novatek NT36523 display controller, such as some
534	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
535
536config DRM_PANEL_NOVATEK_NT36672A
537	tristate "Novatek NT36672A DSI panel"
538	depends on OF
539	depends on DRM_MIPI_DSI
540	depends on BACKLIGHT_CLASS_DEVICE
541	help
542	  Say Y here if you want to enable support for the panels built
543	  around the Novatek NT36672A display controller, such as some
544	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
545
546config DRM_PANEL_NOVATEK_NT36672E
547	tristate "Novatek NT36672E DSI panel"
548	depends on OF
549	depends on DRM_MIPI_DSI
550	depends on BACKLIGHT_CLASS_DEVICE
551	help
552	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
553	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
554	  RGB per pixel.
555
556config DRM_PANEL_NOVATEK_NT37801
557	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
558	depends on OF
559	depends on DRM_MIPI_DSI
560	depends on BACKLIGHT_CLASS_DEVICE
561	select DRM_DISPLAY_DSC_HELPER
562	select DRM_DISPLAY_HELPER
563	help
564	  Say Y here if you want to enable support for Novatek NT37801 (or
565	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
566	  resolution.
567
568config DRM_PANEL_NOVATEK_NT39016
569	tristate "Novatek NT39016 RGB/SPI panel"
570	depends on OF && SPI
571	depends on BACKLIGHT_CLASS_DEVICE
572	select REGMAP_SPI
573	help
574	  Say Y here if you want to enable support for the panels built
575	  around the Novatek NT39016 display controller.
576
577config DRM_PANEL_OLIMEX_LCD_OLINUXINO
578	tristate "Olimex LCD-OLinuXino panel"
579	depends on OF
580	depends on I2C
581	depends on BACKLIGHT_CLASS_DEVICE
582	select CRC32
583	help
584	  The panel is used with different sizes LCDs, from 480x272 to
585	  1280x800, and 24 bit per pixel.
586
587	  Say Y here if you want to enable support for Olimex Ltd.
588	  LCD-OLinuXino panel.
589
590config DRM_PANEL_ORISETECH_OTA5601A
591        tristate "Orise Technology ota5601a RGB/SPI panel"
592        depends on SPI
593        depends on BACKLIGHT_CLASS_DEVICE
594        select REGMAP_SPI
595        help
596          Say Y here if you want to enable support for the panels built
597          around the Orise Technology OTA9601A display controller.
598
599config DRM_PANEL_ORISETECH_OTM8009A
600	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
601	depends on OF
602	depends on DRM_MIPI_DSI
603	depends on BACKLIGHT_CLASS_DEVICE
604	help
605	  Say Y here if you want to enable support for Orise Technology
606	  otm8009a 480x800 dsi 2dl panel.
607
608config DRM_PANEL_OSD_OSD101T2587_53TS
609	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
610	depends on OF
611	depends on DRM_MIPI_DSI
612	depends on BACKLIGHT_CLASS_DEVICE
613	help
614	  Say Y here if you want to enable support for One Stop Displays
615	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
616
617config DRM_PANEL_PANASONIC_VVX10F034N00
618	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
619	depends on OF
620	depends on DRM_MIPI_DSI
621	depends on BACKLIGHT_CLASS_DEVICE
622	help
623	  Say Y here if you want to enable support for Panasonic VVX10F034N00
624	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
625	  Xperia Z2 tablets
626
627config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
628	tristate "Raspberry Pi 7-inch touchscreen panel"
629	depends on DRM_MIPI_DSI
630	help
631	  Say Y here if you want to enable support for the Raspberry
632	  Pi 7" Touchscreen.  To compile this driver as a module,
633	  choose M here.
634
635config DRM_PANEL_RAYDIUM_RM67191
636	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
637	depends on OF
638	depends on DRM_MIPI_DSI
639	depends on BACKLIGHT_CLASS_DEVICE
640	help
641	  Say Y here if you want to enable support for Raydium RM67191 FHD
642	  (1080x1920) DSI panel.
643
644config DRM_PANEL_RAYDIUM_RM67200
645	tristate "Raydium RM67200-based DSI panel"
646	depends on OF
647	depends on DRM_MIPI_DSI
648	help
649	  Say Y here if you want to enable support for Raydium RM67200-based
650	  DSI video mode panels. This panel controller can be found in the
651	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
652	  evaluation boards.
653
654config DRM_PANEL_RAYDIUM_RM68200
655	tristate "Raydium RM68200 720x1280 DSI video mode panel"
656	depends on OF
657	depends on DRM_MIPI_DSI
658	depends on BACKLIGHT_CLASS_DEVICE
659	help
660	  Say Y here if you want to enable support for Raydium RM68200
661	  720x1280 DSI video mode panel.
662
663config DRM_PANEL_RAYDIUM_RM692E5
664	tristate "Raydium RM692E5-based DSI panel"
665	depends on OF
666	depends on DRM_MIPI_DSI
667	depends on BACKLIGHT_CLASS_DEVICE
668	select DRM_DISPLAY_DSC_HELPER
669	select DRM_DISPLAY_HELPER
670	help
671	  Say Y here if you want to enable support for Raydium RM692E5-based
672	  display panels, such as the one found in the Fairphone 5 smartphone.
673
674config DRM_PANEL_RAYDIUM_RM69380
675	tristate "Raydium RM69380-based DSI panel"
676	depends on OF && GPIOLIB
677	depends on DRM_MIPI_DSI
678	depends on BACKLIGHT_CLASS_DEVICE
679	help
680	  Say Y here if you want to enable support for Raydium RM69380-based
681	  display panels.
682
683	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
684	  in combination with an EDO OLED panel.
685
686config DRM_PANEL_RENESAS_R61307
687	tristate "Renesas R61307 DSI video mode panel"
688	depends on OF
689	depends on DRM_MIPI_DSI
690	depends on BACKLIGHT_CLASS_DEVICE
691	help
692	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
693	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
694	  resolution and uses 24 bit RGB per pixel.
695
696	  This panel controller can be found in LG Optimus Vu P895 smartphone
697	  in combination with LCD panel.
698
699config DRM_PANEL_RENESAS_R69328
700	tristate "Renesas R69328 720x1280 DSI video mode panel"
701	depends on OF
702	depends on DRM_MIPI_DSI
703	depends on BACKLIGHT_CLASS_DEVICE
704	help
705	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
706	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
707	  resolution and uses 24 bit RGB per pixel.
708
709	  This panel controller can be found in LG Optimus 4X P895 smartphone
710	  in combination with LCD panel.
711
712config DRM_PANEL_RONBO_RB070D30
713	tristate "Ronbo Electronics RB070D30 panel"
714	depends on OF
715	depends on DRM_MIPI_DSI
716	depends on BACKLIGHT_CLASS_DEVICE
717	help
718	  Say Y here if you want to enable support for Ronbo Electronics
719	  RB070D30 1024x600 DSI panel.
720
721config DRM_PANEL_SAMSUNG_AMS581VF01
722	tristate "Samsung AMS581VF01 panel"
723	depends on OF
724	depends on DRM_MIPI_DSI
725	depends on BACKLIGHT_CLASS_DEVICE
726	help
727	  Say Y or M here if you want to enable support for the
728	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
729
730config DRM_PANEL_SAMSUNG_AMS639RQ08
731	tristate "Samsung AMS639RQ08 panel"
732	depends on OF
733	depends on DRM_MIPI_DSI
734	depends on BACKLIGHT_CLASS_DEVICE
735	help
736	  Say Y or M here if you want to enable support for the
737	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
738
739config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
740	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
741	depends on GPIOLIB && OF && REGULATOR
742	depends on DRM_MIPI_DSI
743	depends on BACKLIGHT_CLASS_DEVICE
744	help
745	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
746	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
747	  GT-I9195I). To compile this driver as a module, choose M here.
748
749config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
750	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
751	depends on OF
752	select DRM_MIPI_DSI
753	select VIDEOMODE_HELPERS
754
755config DRM_PANEL_SAMSUNG_ATNA33XC20
756	tristate "Samsung ATNA33XC20 eDP panel"
757	depends on OF
758	depends on BACKLIGHT_CLASS_DEVICE
759	depends on PM
760	select DRM_DISPLAY_DP_HELPER
761	select DRM_DISPLAY_HELPER
762	select DRM_DISPLAY_DP_AUX_BUS
763	help
764	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
765	  be handled by the DRM_PANEL_SIMPLE driver because its power
766	  sequencing is non-standard.
767
768config DRM_PANEL_SAMSUNG_DB7430
769	tristate "Samsung DB7430-based DPI panels"
770	depends on OF && SPI && GPIOLIB
771	depends on BACKLIGHT_CLASS_DEVICE
772	select DRM_MIPI_DBI
773	help
774	  Say Y here if you want to enable support for the Samsung
775	  DB7430 DPI display controller used in such devices as the
776	  LMS397KF04 480x800 DPI panel.
777
778config DRM_PANEL_SAMSUNG_LD9040
779	tristate "Samsung LD9040 RGB/SPI panel"
780	depends on OF && SPI
781	depends on BACKLIGHT_CLASS_DEVICE
782	select VIDEOMODE_HELPERS
783
784config DRM_PANEL_SAMSUNG_S6E3FA7
785	tristate "Samsung S6E3FA7 panel driver"
786	depends on OF
787	depends on DRM_MIPI_DSI
788	depends on BACKLIGHT_CLASS_DEVICE
789	help
790	  Say Y here if you want to enable support for the Samsung S6E3FA7
791	  1920x2220 panel.
792
793config DRM_PANEL_SAMSUNG_S6D16D0
794	tristate "Samsung S6D16D0 DSI video mode panel"
795	depends on OF
796	depends on DRM_MIPI_DSI
797	select VIDEOMODE_HELPERS
798
799config DRM_PANEL_SAMSUNG_S6D27A1
800	tristate "Samsung S6D27A1 DPI panel driver"
801	depends on OF && SPI && GPIOLIB
802	select DRM_MIPI_DBI
803	help
804	  Say Y here if you want to enable support for the Samsung
805	  S6D27A1 DPI 480x800 panel.
806
807	  This panel can be found in Samsung Galaxy Ace 2
808	  GT-I8160 mobile phone.
809
810config DRM_PANEL_SAMSUNG_S6D7AA0
811	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
812	depends on OF
813	depends on BACKLIGHT_CLASS_DEVICE
814	select DRM_MIPI_DSI
815	select VIDEOMODE_HELPERS
816
817config DRM_PANEL_SAMSUNG_S6E3FC2X01
818	tristate "Samsung S6E3FC2X01 DSI panel controller"
819	depends on OF
820	depends on DRM_MIPI_DSI
821	depends on BACKLIGHT_CLASS_DEVICE
822	select VIDEOMODE_HELPERS
823	help
824	  Say Y or M here if you want to enable support for the
825	  Samsung S6E3FC2 DDIC and connected MIPI DSI panel.
826	  Currently supported panels:
827
828	    Samsung AMS641RW (found in the OnePlus 6T smartphone)
829
830config DRM_PANEL_SAMSUNG_S6E3HA2
831	tristate "Samsung S6E3HA2 DSI video mode panel"
832	depends on OF
833	depends on DRM_MIPI_DSI
834	depends on BACKLIGHT_CLASS_DEVICE
835	select VIDEOMODE_HELPERS
836
837config DRM_PANEL_SAMSUNG_S6E3HA8
838	tristate "Samsung S6E3HA8 DSI video mode panel"
839	depends on OF
840	depends on DRM_MIPI_DSI
841	depends on BACKLIGHT_CLASS_DEVICE
842	select DRM_DISPLAY_DSC_HELPER
843	select VIDEOMODE_HELPERS
844
845config DRM_PANEL_SAMSUNG_S6E63J0X03
846	tristate "Samsung S6E63J0X03 DSI command mode panel"
847	depends on OF
848	depends on DRM_MIPI_DSI
849	depends on BACKLIGHT_CLASS_DEVICE
850	select VIDEOMODE_HELPERS
851
852config DRM_PANEL_SAMSUNG_S6E63M0
853	tristate "Samsung S6E63M0 RGB panel"
854	depends on OF
855	depends on BACKLIGHT_CLASS_DEVICE
856	help
857	  Say Y here if you want to enable support for Samsung S6E63M0
858	  AMOLED LCD panel. This panel can be accessed using SPI or
859	  DSI.
860
861config DRM_PANEL_SAMSUNG_S6E63M0_SPI
862	tristate "Samsung S6E63M0 RGB SPI interface"
863	depends on SPI
864	depends on DRM_PANEL_SAMSUNG_S6E63M0
865	default DRM_PANEL_SAMSUNG_S6E63M0
866	select DRM_MIPI_DBI
867	help
868	  Say Y here if you want to be able to access the Samsung
869	  S6E63M0 panel using SPI.
870
871config DRM_PANEL_SAMSUNG_S6E63M0_DSI
872	tristate "Samsung S6E63M0 RGB DSI interface"
873	depends on DRM_MIPI_DSI
874	depends on DRM_PANEL_SAMSUNG_S6E63M0
875	help
876	  Say Y here if you want to be able to access the Samsung
877	  S6E63M0 panel using DSI.
878
879config DRM_PANEL_SAMSUNG_S6E8AA0
880	tristate "Samsung S6E8AA0 DSI video mode panel"
881	depends on OF
882	select DRM_MIPI_DSI
883	select VIDEOMODE_HELPERS
884
885config DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01
886	tristate "Samsung AMS561RA01 panel with S6E8AA5X01 controller"
887	depends on GPIOLIB && OF && REGULATOR
888	depends on DRM_MIPI_DSI
889	depends on BACKLIGHT_CLASS_DEVICE
890	help
891	  Say Y here if you want to enable support for Samsung AMS561RA01
892	  panel, which uses Samsung's S6E8AA5X01 controller. The panel has a
893	  ~5.6 inch AMOLED display, and the controller is driven by the MIPI
894	  DSI protocol with 4 lanes.
895
896config DRM_PANEL_SAMSUNG_SOFEF00
897	tristate "Samsung SOFEF00 DSI panel controller"
898	depends on OF
899	depends on DRM_MIPI_DSI
900	depends on BACKLIGHT_CLASS_DEVICE
901	select VIDEOMODE_HELPERS
902	help
903	  Say Y or M here if you want to enable support for the Samsung AMOLED
904	  panel SOFEF00 DDIC and connected panel.
905	  Currently supported panels:
906
907	    Samsung AMS628NW01 (found in OnePlus 6, 1080x2280@60Hz)
908
909config DRM_PANEL_SEIKO_43WVF1G
910	tristate "Seiko 43WVF1G panel"
911	depends on OF
912	depends on BACKLIGHT_CLASS_DEVICE
913	select VIDEOMODE_HELPERS
914	help
915	  Say Y here if you want to enable support for the Seiko
916	  43WVF1G controller for 800x480 LCD panels
917
918config DRM_PANEL_SHARP_LQ079L1SX01
919	tristate "Sharp LQ079L1SX01 panel"
920	depends on OF
921	depends on DRM_MIPI_DSI
922	depends on BACKLIGHT_CLASS_DEVICE
923	select VIDEOMODE_HELPERS
924	help
925	  Say Y here if you want to enable support for Sharp LQ079L1SX01
926	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
927	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
928	  the host.
929
930	  To compile this driver as a module, choose M here: the module
931	  will be called panel-sharp-lq079l1sx01.
932
933config DRM_PANEL_SHARP_LQ101R1SX01
934	tristate "Sharp LQ101R1SX01 panel"
935	depends on OF
936	depends on DRM_MIPI_DSI
937	depends on BACKLIGHT_CLASS_DEVICE
938	help
939	  Say Y here if you want to enable support for Sharp LQ101R1SX01
940	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
941	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
942	  the host and has a built-in LED backlight.
943
944	  To compile this driver as a module, choose M here: the module
945	  will be called panel-sharp-lq101r1sx01.
946
947config DRM_PANEL_SHARP_LS037V7DW01
948	tristate "Sharp LS037V7DW01 VGA LCD panel"
949	depends on GPIOLIB && OF && REGULATOR
950	help
951	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
952	  (480x640) LCD panel (found on the TI SDP3430 board).
953
954config DRM_PANEL_SHARP_LS043T1LE01
955	tristate "Sharp LS043T1LE01 qHD video mode panel"
956	depends on OF
957	depends on DRM_MIPI_DSI
958	depends on BACKLIGHT_CLASS_DEVICE
959	help
960	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
961	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
962
963config DRM_PANEL_SHARP_LS060T1SX01
964	tristate "Sharp LS060T1SX01 FullHD video mode panel"
965	depends on OF
966	depends on DRM_MIPI_DSI
967	depends on BACKLIGHT_CLASS_DEVICE
968	help
969	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
970	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
971	  Bundle.
972
973config DRM_PANEL_SITRONIX_ST7701
974	tristate "Sitronix ST7701 panel driver"
975	depends on OF
976	depends on SPI || DRM_MIPI_DSI
977	select DRM_MIPI_DBI if SPI
978	depends on BACKLIGHT_CLASS_DEVICE
979	help
980	  Say Y here if you want to enable support for the Sitronix
981	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
982	  system interfaces.
983
984config DRM_PANEL_SITRONIX_ST7703
985	tristate "Sitronix ST7703 based MIPI touchscreen panels"
986	depends on OF
987	depends on DRM_MIPI_DSI
988	depends on BACKLIGHT_CLASS_DEVICE
989	help
990	  Say Y here if you want to enable support for Sitronix ST7703 based
991	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
992	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
993	  in backlight and touch controller.
994	  Touch input support is provided by the goodix driver and needs to be
995	  selected separately.
996
997config DRM_PANEL_SITRONIX_ST7789V
998	tristate "Sitronix ST7789V panel"
999	depends on OF && SPI
1000	depends on BACKLIGHT_CLASS_DEVICE
1001	help
1002	  Say Y here if you want to enable support for the Sitronix
1003	  ST7789V controller for 240x320 LCD panels
1004
1005config DRM_PANEL_SONY_ACX565AKM
1006	tristate "Sony ACX565AKM panel"
1007	depends on GPIOLIB && OF && SPI
1008	depends on BACKLIGHT_CLASS_DEVICE
1009	help
1010	  Say Y here if you want to enable support for the Sony ACX565AKM
1011	  800x600 3.5" panel (found on the Nokia N900).
1012
1013config DRM_PANEL_SONY_TD4353_JDI
1014	tristate "Sony TD4353 JDI panel"
1015	depends on GPIOLIB && OF
1016	depends on DRM_MIPI_DSI
1017	depends on BACKLIGHT_CLASS_DEVICE
1018	help
1019	  Say Y here if you want to enable support for the Sony Tama
1020	  TD4353 JDI command mode panel as found on some Sony Xperia
1021	  XZ2 and XZ2 Compact smartphones.
1022
1023config DRM_PANEL_SONY_TULIP_TRULY_NT35521
1024	tristate "Sony Tulip Truly NT35521 panel"
1025	depends on GPIOLIB && OF
1026	depends on DRM_MIPI_DSI
1027	depends on BACKLIGHT_CLASS_DEVICE
1028	help
1029	  Say Y here if you want to enable support for the Sony Tulip
1030	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
1031	  Aqua phone.
1032
1033config DRM_PANEL_STARTEK_KD070FHFID015
1034	tristate "STARTEK KD070FHFID015 panel"
1035	depends on OF
1036	depends on DRM_MIPI_DSI
1037	depends on BACKLIGHT_CLASS_DEVICE
1038	help
1039	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
1040	  based on RENESAS-R69429 controller. The panel is a 7-inch TFT LCD display
1041	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
1042	  the host, a built-in LED backlight and touch controller.
1043
1044config DRM_PANEL_EDP
1045	tristate "support for simple Embedded DisplayPort panels"
1046	depends on OF
1047	depends on BACKLIGHT_CLASS_DEVICE
1048	depends on PM
1049	select VIDEOMODE_HELPERS
1050	select DRM_DISPLAY_DP_HELPER
1051	select DRM_DISPLAY_HELPER
1052	select DRM_DISPLAY_DP_AUX_BUS
1053	select DRM_KMS_HELPER
1054	help
1055	  DRM panel driver for dumb eDP panels that need at most a regulator and
1056	  a GPIO to be powered up. Optionally a backlight can be attached so
1057	  that it can be automatically turned off when the panel goes into a
1058	  low power state.
1059
1060config DRM_PANEL_SIMPLE
1061	tristate "support for simple panels (other than eDP ones)"
1062	depends on OF
1063	depends on BACKLIGHT_CLASS_DEVICE
1064	depends on PM
1065	select VIDEOMODE_HELPERS
1066	help
1067	  DRM panel driver for dumb non-eDP panels that need at most a regulator
1068	  and a GPIO to be powered up. Optionally a backlight can be attached so
1069	  that it can be automatically turned off when the panel goes into a
1070	  low power state.
1071
1072config DRM_PANEL_SUMMIT
1073	tristate "Apple Summit display panel"
1074	depends on OF
1075	depends on DRM_MIPI_DSI
1076	depends on BACKLIGHT_CLASS_DEVICE
1077	help
1078	  Say Y if you want to enable support for the "Summit" display panel
1079	  used as a touchbar on certain Apple laptops.
1080
1081config DRM_PANEL_SYNAPTICS_R63353
1082	tristate "Synaptics R63353-based panels"
1083	depends on OF
1084	depends on DRM_MIPI_DSI
1085	depends on BACKLIGHT_CLASS_DEVICE
1086	help
1087	  Say Y if you want to enable support for panels based on the
1088	  Synaptics R63353 controller.
1089
1090config DRM_PANEL_SYNAPTICS_TDDI
1091	tristate "Synaptics TDDI display panels"
1092	depends on OF
1093	depends on DRM_MIPI_DSI
1094	depends on BACKLIGHT_CLASS_DEVICE
1095	help
1096	  Say Y if you want to enable support for the Synaptics TDDI display
1097	  panels. There are multiple MIPI DSI panels manufactured under the TDDI
1098	  namesake, with varying resolutions and data lanes. They also have a
1099	  built-in LED backlight and a touch controller.
1100
1101config DRM_PANEL_TDO_TL070WSH30
1102	tristate "TDO TL070WSH30 DSI panel"
1103	depends on OF
1104	depends on DRM_MIPI_DSI
1105	depends on BACKLIGHT_CLASS_DEVICE
1106	help
1107	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1108	  panel module. The panel has a 1024×600 resolution and uses
1109	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1110	  the host, a built-in LED backlight and touch controller.
1111
1112config DRM_PANEL_TPO_TD028TTEC1
1113	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1114	depends on OF && SPI
1115	depends on BACKLIGHT_CLASS_DEVICE
1116	help
1117	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1118	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1119
1120config DRM_PANEL_TPO_TD043MTEA1
1121	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1122	depends on GPIOLIB && OF && REGULATOR && SPI
1123	help
1124	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1125	  4.3" panel (found on the OMAP3 Pandora board).
1126
1127config DRM_PANEL_TPO_TPG110
1128	tristate "TPO TPG 800x400 panel"
1129	depends on OF && SPI && GPIOLIB
1130	depends on BACKLIGHT_CLASS_DEVICE
1131	help
1132	  Say Y here if you want to enable support for TPO TPG110
1133	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1134	  800x400 LCD panels.
1135
1136config DRM_PANEL_TRULY_NT35597_WQXGA
1137	tristate "Truly WQXGA"
1138	depends on OF
1139	depends on DRM_MIPI_DSI
1140	help
1141	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1142	  Video Mode panel
1143
1144config DRM_PANEL_VISIONOX_G2647FB105
1145	tristate "Visionox G2647FB105"
1146	depends on OF
1147	depends on DRM_MIPI_DSI
1148	depends on BACKLIGHT_CLASS_DEVICE
1149	help
1150	  Say Y here if you want to enable support for the Visionox
1151	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1152
1153config DRM_PANEL_VISIONOX_R66451
1154	tristate "Visionox R66451"
1155	depends on OF
1156	depends on DRM_MIPI_DSI
1157	depends on BACKLIGHT_CLASS_DEVICE
1158	select DRM_DISPLAY_DSC_HELPER
1159	select DRM_DISPLAY_HELPER
1160	help
1161	  Say Y here if you want to enable support for Visionox
1162	  R66451 1080x2340 AMOLED DSI panel.
1163
1164config DRM_PANEL_VISIONOX_RM69299
1165	tristate "Visionox RM69299"
1166	depends on OF
1167	depends on DRM_MIPI_DSI
1168	help
1169	  Say Y here if you want to enable support for Visionox
1170	  RM69299  DSI Video Mode panel.
1171
1172config DRM_PANEL_VISIONOX_RM692E5
1173	tristate "Visionox RM692E5"
1174	depends on OF
1175	depends on DRM_MIPI_DSI
1176	depends on BACKLIGHT_CLASS_DEVICE
1177	select DRM_DISPLAY_DSC_HELPER
1178	select DRM_DISPLAY_HELPER
1179	help
1180	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1181	  display panels, such as the one found in the Nothing Phone (1)
1182	  smartphone.
1183
1184config DRM_PANEL_VISIONOX_VTDR6130
1185	tristate "Visionox VTDR6130"
1186	depends on OF
1187	depends on DRM_MIPI_DSI
1188	depends on BACKLIGHT_CLASS_DEVICE
1189	help
1190	  Say Y here if you want to enable support for Visionox
1191	  VTDR6130 1080x2400 AMOLED DSI panel.
1192
1193config DRM_PANEL_WIDECHIPS_WS2401
1194	tristate "Widechips WS2401 DPI panel driver"
1195	depends on SPI && GPIOLIB
1196	depends on BACKLIGHT_CLASS_DEVICE
1197	select DRM_MIPI_DBI
1198	help
1199	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1200	  480x800 display controller used in panels such as Samsung LMS380KF01.
1201	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1202
1203config DRM_PANEL_XINPENG_XPP055C272
1204	tristate "Xinpeng XPP055C272 panel driver"
1205	depends on OF
1206	depends on DRM_MIPI_DSI
1207	depends on BACKLIGHT_CLASS_DEVICE
1208	help
1209	  Say Y here if you want to enable support for the Xinpeng
1210	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1211	  system interfaces.
1212endmenu
1213