Lines Matching full:controller
3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
14 Enable this option to support this chip in host controller mode.
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
46 tristate "Support for additional Renesas xHCI controller with firmware"
49 Say 'Y' to enable the support for the Renesas xHCI controller with
68 Say 'Y' to enable the support for the xHCI host controller
76 Say 'Y' to enable the support for the xHCI host controller
86 Say 'Y' to enable the support for the xHCI host controller
95 Say 'Y' to enable the support for the xHCI host controller
104 Say 'Y' to enable the support for the xHCI host controller
122 Say 'Y' to enable the support for the xHCI host controller
151 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
152 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
153 If your USB host controller supports USB 2.0, you will likely want to
154 configure this Host Controller Driver.
159 connect to a companion controller. If you configure EHCI, you should
161 Controller Driver or UHCI (for Via motherboards) Host Controller
175 controller is needed. It's safe to say "y" even if your
176 controller doesn't support this feature.
194 Controller, and some of those devices will not work correctly
209 bool "Use Xilinx usb host EHCI controller core"
214 Xilinx xps USB host controller core is EHCI compliant and has
220 tristate "Support for Freescale on-chip EHCI USB controller"
226 tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
230 Enables support for the on-chip EHCI controller on
239 Enables support for the on-chip EHCI controller on
243 tristate "Support for Marvell EBU on-chip EHCI USB controller"
247 Enables support for the on-chip EHCI controller on Marvell's
251 Marvell PXA/MMP USB controller" for those.
254 tristate "Support for ST SPEAr on-chip EHCI USB controller"
258 Enables support for the on-chip EHCI controller on
262 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
267 Enable support for the on-chip EHCI controller found on
271 tristate "Support for Atmel on-chip EHCI USB controller"
275 Enables support for the on-chip EHCI controller on
293 bool "EHCI support for PPC USB controller on OF platform bus"
297 Enables support for the USB controller present on the PowerPC
301 bool "EHCI support for SuperH USB controller"
304 Enables support for the on-chip EHCI controller on the SuperH.
305 If you use the PCI EHCI controller, this option is not necessary.
312 controller.
315 tristate "EHCI support for Marvell PXA/MMP USB controller"
320 USB SPH and OTG controller. SPH is a single port host, and it can
321 only be EHCI host. OTG is controller that can switch to host mode.
323 controller used by the EBU-type SoCs including Orion, Kirkwood,
325 on-chip EHCI USB controller" for those.
331 This driver supports USB host controller on some Cavium
355 controller. It is needed for high-speed (480Mbit/sec)
365 The OXU210HP is an USB host/OTG/device controller. Enable this
391 Supports the Philips ISP1362 chip as a host controller
413 The Open Host Controller Interface (OHCI) is a standard for accessing
414 USB 1.1 host controller hardware. It does more in hardware than Intel's
415 UHCI specification. If your USB host controller follows the OHCI spec,
417 USB controller from Intel or VIA, this is appropriate. If your host
418 controller doesn't use PCI, this is probably appropriate. For a PCI
420 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
432 Enables support for the OHCI controller on OMAP1/2 chips.
435 tristate "Support for ST SPEAr on-chip OHCI USB controller"
439 Enables support for the on-chip OHCI controller on
443 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
448 Enable support for the on-chip OHCI controller found on
456 Enables support for the on-chip OHCI controller on
460 tristate "Support for LPC on-chip OHCI USB controller"
466 Enables support for the on-chip OHCI controller on
470 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
474 Enables support for the on-chip OHCI controller on
478 tristate "Support for Atmel on-chip OHCI USB controller"
482 Enables support for the on-chip OHCI controller on
494 Enables support for the on-chip OHCI controller on
505 controller. This driver cannot currently be a loadable
536 Enables support for PCI-bus plug-in USB controller cards.
561 controller.
583 controller. It is needed for low-speed USB 1.0 device
592 The Universal Host Controller Interface is a standard by Intel for
594 host controller). If your USB host controller conforms to this
599 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
618 tristate "Freescale QE USB Host Controller support"
623 This driver enables support for Freescale QE USB Host Controller
628 bool "Freescale QE USB Host Controller debug support"
638 The SL811HS is a single-port USB controller that supports either
640 board has this chip, and you want to use it as a host controller.
670 The R8A66597 is a USB 2.0 host and peripheral controller.
673 to use it as a host controller. If unsure, say N.
682 The Renesas USBHS is a USB 2.0 host and peripheral controller.
685 to use it as a host controller. If unsure, say N.
696 Enable support for the EHCI and OCHI host controller on an bcma bus.
708 Enable support for the EHCI and OCHI host controller on an bcma bus.
718 supported by the host controller drivers.
721 (EHSET) for EHCI host controller hardware, specifically the "Single