Lines Matching full:this
23 (half duplex), SSP, SSI, and PSP. This driver framework should
54 Enable this option if you want to enable the SPI memory extension.
55 This extension is meant to simplify interaction with SPI memories
69 This enables support for SPI-NAND mode on the Airoha NAND
70 Flash Interface found on Airoha ARM SoCs. This controller
78 This is the driver for the Altera SPI Controller.
91 This is a Device Feature List (DFL) bus driver for the
99 This enables master mode support for the SPIFC (SPI flash
107 This enables master mode support for the SPISG (SPI scatter-gather
115 This enables support for the SPI controller present on
126 This enables support for the SPI controller present on the
134 This enables support for the SPI controller present on the
141 This enables support for the SPI controller present on the
149 This enables support for the Firmware Memory controller (FMC)
160 This selects a driver for the Atmel SPI Controller, present on
168 This selects a driver for the AT91 USART Controller as SPI Master,
176 This enables support for the Quad SPI controller in master mode.
177 This driver does not support generic SPI. The implementation only
185 If you say yes to this option, support will be included for the
193 This enables support for the Analog Devices AXI SPI Engine SPI controller.
202 This selects a driver for the Broadcom BCM2835 SPI master.
205 "universal SPI master", and the regular SPI controller. This driver
213 This selects a driver for the Broadcom BCM2835 SPI aux master.
217 This driver is for the universal/auxiliary SPI controller.
229 This enables support for the High Speed SPI controller present on
239 Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs
240 based platforms. This driver works for both SPI master for SPI NOR
247 This enables support for the High Speed SPI controller present on
256 Select this to get SPI support through I/O pins (GPIO, parallel
258 this code to manage the per-word or per-transfer accesses to the
261 This is library code, and is automatically selected by drivers that
262 need it. You only need to select this explicitly to support driver
263 modules that aren't part of this kernel tree.
270 This uses a custom parallel port cable to connect to an AVR
273 This same cable can be used to flash new firmware.
278 This selects the Cadence SPI controller master driver
288 Flash over 1/2/4-bit wide bus. Enable this option if you have a
300 Flash over up to 8-bit wide bus. Enable this option if you have a
314 This enables dedicated general purpose SPI/Microwire1-compatible
321 This enables support for the Coldfire QSPI controller in master
329 This enables support for the SPI controller inside the Cirrus Logic
383 in this driver).
391 If you say yes to this option, support will be included for Diolan
394 This driver can also be built as a module. If so, the module
401 This enables using the Cirrus EP93xx SPI controller in master
409 emulation that is designed for serial flash access. This driver
417 This enables support for the driver for FSI bus attached SPI
424 This enables Freescale i.MX LPSPI controllers in master mode.
431 This enables support for the Quad SPI controller in master mode.
434 This controller does not support generic SPI messages. It only
441 This enables support for the driver for GXP bus attached SPI
448 This enables support for HiSilicon SPI controller found on
451 This driver can also be built as a module. If so, the module
459 This enables support for HiSilicon v3xx SPI NOR flash controller
467 This enables support for the Flex SPI controller in master mode.
470 This controller does not support generic SPI messages and only
478 This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
480 slaves connected to a bus using this driver are configured as usual,
482 for the chipselect used by this controller driver.
484 Note that this driver often won't achieve even 1 Mbit/sec speeds,
487 speed with a custom version of this driver; see the source code.
493 This enables support for the SPFI master controller found on
500 This enables support for the Freescale i.MX SPI controllers.
506 This enables support for the Ingenic SoCs SPI controller.
508 To compile this driver as a module, choose M here: the module
521 This enables PCI support for the Intel PCH/PCU SPI controller in
522 master mode. This controller is used to hold BIOS and other
524 only work in hardware sequencing mode, this means that the
526 use. Using this driver it is possible to upgrade BIOS directly
529 To compile this driver as a module, choose M here: the module
538 This enables platform support for the Intel PCH/PCU SPI
543 this driver it is possible to upgrade BIOS directly from Linux.
548 To compile this driver as a module, choose M here: the module
555 This enables support for the SPI master controller in the J-Core
564 This driver supports KEBA SPI master type 2 FPGA implementation,
567 This driver can also be built as a module. If so, the module
575 This driver supports the NS LM70 LLP Evaluation Board,
588 This bus driver supports the Loongson SPI hardware controller in
599 This bus driver supports the Loongson SPI hardware controller in
609 This driver provides an SPI master device to drive Maxim
619 This drivers supports the MPC52xx SPI controller in master SPI
626 This enables using the Freescale MPC52xx Programmable Serial
633 This enables using the Freescale MPC5121 Programmable Serial
650 This enables using the Freescale SPI controllers in master mode.
653 This also enables using the Aeroflex Gaisler GRLIB SPI controller in
661 This enables support for the Freescale DSPI controller in master
668 This enables using the Freescale eSPI controllers in master mode.
670 P20xx, P30xx,P40xx, P50xx uses this controller.
677 Select this option to enable SPI driver for the Intel
680 This driver can also be built as a module. If so, the module
688 This enables master mode support for the SPICC (SPI communication
696 This enables master mode support for the SPIFC (SPI flash
703 This enables the SPI driver for Microchip FPGA SPI controllers.
712 This enables the QSPI driver for Microchip FPGA QSPI controllers.
721 This selects the MediaTek(R) SPI bus driver.
730 This selects a driver for the MediaTek MT7621 SPI Controller.
736 This enables support for SPI NOR controller found on MediaTek
737 ARM SoCs. This is a controller specifically for SPI NOR flash.
747 This enables support for SPI-NAND mode on the MediaTek NAND
748 Flash Interface found on MediaTek ARM SoCs. This controller
757 This enables support got the Flash Interface Unit SPI controller
760 This driver does not support generic SPI. The implementation only
768 This enables support for the Flash Interface Unit SPI controller
770 This driver does not support generic SPI. The implementation only
777 This driver provides support for Nuvoton NPCM BMC
784 This driver supports the Lantiq SSC SPI controller in master
785 mode. This controller is found on Intel (former Lantiq) SoCs like
793 This is the driver for OpenCores tiny SPI master controller.
807 This hooks up to the MicroWire controller on OMAP1 chips.
822 This device supports single, dual and quad read support, while
829 This enables using the SPI master controller on the Orion
837 This is a PCI to SPI Bus driver
838 This driver can be built as module. If so, the module will be
860 This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
869 This selects a driver for the PPC4xx SPI Controller.
876 This enables using a PXA2xx or Sodaville SSP port as a SPI master
887 This enables support for the SPI-NAND Flash controller on
890 This driver does not support generic SPI. The implementation
897 This selects a driver for Rockchip SPI controller.
899 If you say yes to this option, support will be included for
902 The main usecase of this controller is to use spi flash as boot
910 This enables support for Rockchip serial flash controller. This
940 RSPI supports both SPI host and SPI target roles. This option only
963 This config will enable serial nand driver for QPIC controller.
975 This driver can also be built as a module. If so, the module
982 This driver supports GENI serial engine based SPI controller in
984 yes to this option, support will be included for the built-in SPI
987 This driver can also be built as a module. If so, the module
1033 This exposes the SPI controller IP from SiFive.
1040 This selects the MediaTek(R) SPI slave device driver.
1050 This enables support for the Socionext F_OSPI controller
1058 This enables support for the SG2044 SPI NOR controller,
1093 This enables support for the Octo SPI controller in master mode.
1094 This driver does not support generic SPI. The implementation only
1103 This enables support for the Quad SPI controller in master mode.
1104 This driver does not support generic SPI. The implementation only
1112 this option, support will be included for the SSC driven SPI.
1125 This enables using the SPI controller on the Allwinner A31 SoCs.
1131 This enables Sunplus SP7021 SPI controller driver on the SP7021 SoCs.
1132 This driver can also be built as a module. If so, the module will be
1153 This selects the Macronix MX25F0A SPI controller driver.
1167 QSPI driver for NVIDIA Tegra QSPI Controller interface. This
1176 SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
1178 get changed with this controller.
1186 The main usecase of this controller is to use spi flash as boot
1210 This driver also supports the ML7213/ML7223/ML7831, a companion chip
1218 This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
1223 This driver supports SCSSI only.
1239 This exposes the SPI controller IP from the Xilinx EDK.
1263 This simple SPI master controller is built into xtfpga bitstreams
1273 This enables support for the Zynq Quad SPI controller
1275 This controller only supports SPI memory interface.
1282 This controller only supports SPI memory interface.
1293 # Add new SPI master controllers in alphabetical order above this line
1302 This adds support for SPI multiplexers. Each SPI mux will be
1304 to be chip selects on this controller. It is still necessary to
1316 This supports user mode SPI protocol drivers.
1322 This enables the SPI loopback testing framework driver
1332 such as the TLE6220, TLE6230 and TLE6240. This provides a
1337 # Add new SPI protocol masters in alphabetical order above this line