Lines Matching +full:riscv +full:- +full:j +full:- +full:extension
1 # SPDX-License-Identifier: GPL-2.0-only
13 dynamic device discovery; some are even write-only or read-only.
17 chips, analog to digital (and d-to-a) converters, and more.
44 If your system has an master-capable SPI controller (which
52 bool "SPI memory extension"
54 Enable this option if you want to enable the SPI memory extension.
55 This extension is meant to simplify interaction with SPI memories
56 by providing a high-level interface to send memory-like commands.
66 This enables support for SPI-NAND mode on the Airoha NAND
68 is implemented as a SPI-MEM controller.
107 to a single device like spi-nor (nvram), input device controller
166 supports spi-mem interface.
245 this code to manage the per-word or per-transfer accesses to the
270 depends on OF && (ARM || ARM64 || X86 || RISCV || MIPS || COMPILE_TEST)
275 Flash over 1/2/4-bit wide bus. Enable this option if you have a
287 Flash over up to 8-bit wide bus. Enable this option if you have a
301 This enables dedicated general purpose SPI/Microwire1-compatible
302 master mode interface (SSI1) for CLPS711X-based CPUs.
320 tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
324 SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
342 tristate "Memory-mapped io interface driver for DW SPI core"
346 tristate "Baikal-T1 SPI driver for DW SPI core"
350 Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
353 part of the Baikal-T1 System Boot Controller has got a very
355 chip-select and Tx/Rx FIFO with just 8 words depth available.
356 The later one is normally connected to an external SPI-nor flash
360 bool "Directly mapped Baikal-T1 Boot SPI flash support"
364 Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which
369 time-critical tasks (like the SPI memory operations implemented
375 tristate "Diolan DLN-2 USB SPI adapter"
382 will be called spi-dln2.
395 The external bus unit (EBU) found on the FALC-ON SoC has SPI
422 supports the high-level SPI memory interface.
439 will be called hisi-kunpeng-spi.
458 supports the high-level SPI memory interface.
461 tristate "GPIO-based bitbanging SPI Master"
465 This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
496 will be called spi-ingenic.
517 will be called spi-intel-pci.
529 exposes the low level SPI-NOR opcodes to the software. Using
536 will be called spi-intel-platform.
539 tristate "J-Core SPI Master"
542 This enables support for the SPI master controller in the J-Core
581 tristate "ICP DAS LP-8841 SPI Controller for RTC"
585 DS-1302 real time clock.
588 LP-8x4x industrial computer.
591 tristate "Freescale MPC52xx SPI (non-PSC) controller support"
656 will be called spi-ljca.
681 If built as a module, it will be called spi-microchip-core.
690 If built as a module, it will be called spi-microchip-core-qspi.
722 This enables support for SPI-NAND mode on the MediaTek NAND
724 is implemented as a SPI-MEM controller with pipelined ECC
736 supports the spi-mem interface.
746 supports spi-mem interface.
814 called as spi-pci1xxxx.
858 tristate "Realtek SPI-NAND Flash Controller"
862 This enables support for the SPI-NAND Flash controller on
866 only supports the spi-mem interface.
899 tristate "Renesas RPC-IF SPI driver"
902 SPI driver for Renesas R-Car Gen3 or RZ/G2 RPC-IF.
929 for serial peripheral interface (SPI) mini-core. SPI in master
942 yes to this option, support will be included for the built-in SPI
946 will be called spi-geni-qcom.
1009 for connecting an SPI Flash memory over up to 8-bit wide bus.
1044 supports spi-mem interface.
1047 tristate "STMicroelectronics SPI SSC-based driver"
1072 called as spi-sunplus-sp7021.
1083 that use the de-facto standard SPI protocol.
1085 It also supports the new dual-bit and quad-bit SPI protocol.
1167 tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
1170 Support for the SPI-I2C bridge found on the Analog Devices
1171 AD-FMCOMMS1-EBZ board.
1242 select one or more specific mux-controller drivers.
1286 If your system has a slave-capable SPI controller, you can enable