Lines Matching +full:phy +full:- +full:select
1 # SPDX-License-Identifier: GPL-2.0-only
3 # Phy drivers for Qualcomm and Atheros platforms
6 tristate "Atheros AR71XX/9XXX USB PHY driver"
9 select RESET_CONTROLLER
10 select GENERIC_PHY
12 Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
15 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
19 select GENERIC_PHY
22 tristate "Qualcomm eDP PHY driver"
26 select GENERIC_PHY
28 Enable this driver to support the Qualcomm eDP PHY found in various
32 tristate "Qualcomm IPQ4019 USB PHY driver"
34 select GENERIC_PHY
36 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
39 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
43 select GENERIC_PHY
46 tristate "Qualcomm PCIe Gen2 PHY Driver"
48 select GENERIC_PHY
50 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
54 tristate "Qualcomm QMP PHY Drivers"
60 tristate "Qualcomm QMP Combo PHY Driver"
64 select GENERIC_PHY
65 select MFD_SYSCON
66 select DRM_AUX_BRIDGE if DRM_BRIDGE
68 Enable this to support the QMP Combo PHY transceiver that is used
72 tristate "Qualcomm QMP PCIe PHY Driver"
74 select GENERIC_PHY
77 Enable this to support the QMP PCIe PHY transceiver that is used
81 tristate "Qualcomm QMP PCIe 8996 PHY Driver"
83 select GENERIC_PHY
86 Enable this to support the QMP PCIe PHY transceiver that is used
90 tristate "Qualcomm QMP UFS PHY Driver"
91 select GENERIC_PHY
94 Enable this to support the QMP UFS PHY transceiver that is used
98 tristate "Qualcomm QMP USB PHY Driver"
99 select GENERIC_PHY
102 Enable this to support the QMP USB PHY transceiver that is used
106 tristate "Qualcomm QMP legacy USB PHY Driver"
107 select GENERIC_PHY
111 PHY transceivers working only in USB3 mode on Qualcomm chips. This
118 tristate "Qualcomm QUSB2 PHY Driver"
121 select GENERIC_PHY
123 Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
124 controllers on Qualcomm chips. This driver supports the high-speed
125 PHY which is usually paired with either the ChipIdea or Synopsys DWC3
131 select GENERIC_PHY
133 Enable support for the USB high-speed eUSB2 repeater on Qualcomm
134 PMICs. The repeater is paired with a Synopsys or M31 eUSB2 Phy
138 tristate "Qualcomm M31 HS PHY driver support"
140 select GENERIC_PHY
142 Enable this to support M31 HS PHY transceivers on Qualcomm chips
143 with DWC3 USB core. It handles PHY initialization, clock
149 bool "PCIE UNIPHY 28LP PHY driver"
154 select GENERIC_PHY
156 Enable this to support the PCIe UNIPHY 28LP phy transceiver that
158 handles PHY initialization, clock management required after
162 tristate "Qualcomm M31 eUSB2 PHY driver support"
164 select GENERIC_PHY
166 Enable this to support M31 EUSB2 PHY transceivers on Qualcomm
169 PHY.
172 tristate "Qualcomm USB HS PHY module"
174 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
175 select GENERIC_PHY
177 Support for the USB high-speed ULPI compliant phy on Qualcomm
181 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
183 select GENERIC_PHY
185 Enable support for the USB high-speed SNPS Femto phy on Qualcomm
186 chipsets. This PHY has differences in the register map compared
187 to the V1 variants. The PHY is paired with a Synopsys DWC3 USB
191 tristate "Qualcomm USB HSIC ULPI PHY module"
193 select GENERIC_PHY
195 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
198 tristate "Qualcomm 28nm High-Speed PHY"
200 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
201 select GENERIC_PHY
204 High-Speed PHY driver. This driver supports the Hi-Speed PHY which
209 tristate "Qualcomm USB Super-Speed PHY driver"
211 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
212 select GENERIC_PHY
214 Enable this to support the Super-Speed USB transceiver on various
218 tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
221 select GENERIC_PHY
225 both HS and SS PHY controllers.
228 tristate "Qualcomm DWMAC SGMII SerDes/PHY driver"
231 select GENERIC_PHY
233 Enable this to support the internal SerDes/SGMII PHY on various