Lines Matching refs:PHY

3 # PHY Layer Configuration
11 PHYlink models the link between the PHY and MAC, allowing fixed
16 tristate "PHY Device support and infrastructure"
18 Ethernet controllers are usually attached to PHY
20 managing PHY devices.
34 Adds support for a set of LED trigger events per-PHY. Link
37 supported by the PHY and also a one common "link" trigger as a
44 for any speed known to the PHY.
57 tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
70 Adds support needed for PHY drivers written in Rust. It provides
79 comment "MII PHY device drivers"
84 Currently supports the Aeonsemi AS21xxx PHY.
90 AS21210PB1 that all register with the PHY ID 0x7500 0x7500
94 tristate "Airoha AN8801 Gigabit PHY"
97 Currently supports the Airoha AN8801R PHY.
100 tristate "Airoha EN8811H 2.5 Gigabit PHY"
104 Currently supports the Airoha EN8811H PHY.
109 Airoha Ethernet PHY common library
117 tristate "Amlogic Meson GXL Internal PHY"
121 Currently has a driver for the Amlogic Meson GXL Internal PHY
128 - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
130 Ethernet PHY
137 - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
140 tristate "Analog Devices ADIN1140 10BASE-T1S PHY"
143 10BASE-T1S PHY.
146 tristate "AMCC QT2025 PHY"
150 Adds support for the Applied Micro Circuits Corporation QT2025 PHY.
157 Currently supports the Asix Electronics PHY found in the X-Surf 100
165 The features are equivalent. It supports the Asix Electronics PHY
178 tristate "Broadcom BCM54140 PHY"
183 Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
185 This driver also supports the hardware monitoring of this PHY and
189 tristate "Broadcom 63xx SOCs internal PHY"
203 tristate "Broadcom BCM84881 PHY"
205 Support the Broadcom BCM84881 PHY.
213 tristate "Broadcom Cygnus/Omega SoC internal PHY"
218 This PHY driver is for the 1G internal PHYs of the Broadcom
221 Currently supports internal PHY's used in the BCM11300,
237 tristate "Cortina EDC CDR 10G Ethernet PHY"
242 tristate "DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY"
245 Support for the DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY.
246 This PHY is designed for enterprise and industrial networking
274 tristate "LSI ET1011C PHY"
276 Supports the LSI ET1011C PHY.
289 tristate "Marvell 88Q2XXX PHY"
296 tristate "Marvell 88X2222 PHY"
310 tristate "MaxLinear MXL86110 PHY support"
318 If you are using a board with the MXL86110 PHY connected to your
351 Currently supports LAN887X T1 PHY
371 Currently supports the DP83865 PHY.
376 Support the 100BASE-TX PHY integrated on the SJA1110 automotive
394 tristate "Onsemi 10BASE-T1S Ethernet PHY"
396 Adds support for the onsemi 10BASE-T1S Ethernet PHY.
397 Currently supports the NCN26000 10BASE-T1S Industrial PHY
417 Currently supports the integrated Ethernet PHY.
442 tristate "Texas Instruments DP83TC811 PHY"
444 Supports the DP83TC811 PHY.
447 tristate "Texas Instruments DP83848 PHY"
449 Supports the DP83848 PHY.
452 tristate "Texas Instruments DP83867 Gigabit PHY"
454 Currently supports the DP83867 PHY.
457 tristate "Texas Instruments DP83869 Gigabit PHY"
459 Currently supports the DP83869 PHY. This PHY supports copper and
463 tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY"
465 Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports
469 tristate "Texas Instruments DP83TG720 Ethernet 1000Base-T1 PHY"