Lines Matching full:this
12 This is an option for use by developers; most people should
13 say N here. This enables MMC host driver debugging. And further
30 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
41 This selects the Qualcomm Data Mover lite/local on SD Card controller.
42 This option will enable the dma to work correctly, if you are using
43 Qcom SOCs and MMC, you would probably need this option to get DMA working.
52 This selects the STMicroelectronics STM32 SDMMC host controller.
61 This selects the Intel(R) PXA(R) Multimedia card Interface.
71 This selects the generic Secure Digital Host Controller Interface.
73 and Toshiba(R). Most controllers found in laptops are of this type.
75 If you have a controller with this interface, say Y or M here. You
84 This is silent Kconfig symbol that is selected by the drivers that
92 This option is selected by drivers running on big endian hosts
95 This endian mapping mode is called "data invariance" and
99 This is the case for the Nintendo Wii SDHCI.
105 This option is selected by SDHCI controller drivers that want to
108 If you have a controller with this feature, say Y or M here.
118 This selects the PCI Secure Digital Host Controller Interface.
121 If you have a controller with this interface, say Y or M here.
130 This adds a pci quirk to disable Ricoh MMC Controller. This
134 useless. It is safe to select this even if you don't
144 This selects support for ACPI enumerated SDHCI controllers,
148 If you have a controller with this interface, say Y or M here.
156 This selects the common helper functions support for Secure Digital
159 If you have a controller with this interface, say Y or M here.
170 This selects the Arasan Secure Digital Host Controller Interface
171 (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
173 If you have a controller with this interface, say Y or M here.
184 This selects the ASPEED Secure Digital Host Controller Interface.
186 If you have a controller with this interface, say Y or M here. You
197 Enable KUnit tests for the ASPEED SDHCI driver. Select this
212 This selects the Atmel SDMMC driver
221 This selects the Freescale eSDHC controller support.
223 If you have a controller with this interface, say Y or M here.
233 This selects the Secure Digital Host Controller Interface (SDHCI)
237 If you have a controller with this interface, say Y or M here.
248 This selects Synopsys DesignWare Cores Mobile Storage Controller
250 If you have a controller with this interface, say Y or M here.
260 This selects the Secure Digital Host Controller Interface (SDHCI)
263 If you have a controller with this interface, say Y or M here.
272 This selects the Secure Digital Host Controller Interface (SDHCI)
275 If you have a Sparx5 SoC with this interface, say Y or M here.
284 This selects the MA35D1 Secure Digital Host Controller Interface.
287 If you have a controller with this interface, say Y or M here.
297 This selects the Cadence SD/SDIO/eMMC driver.
299 If you have a controller with this interface, say Y or M here.
309 This selects the Freescale eSDHC controller support for
312 If you have a controller with this interface, say Y or M here.
324 This selects the Freescale eSDHC/uSDHC controller support
327 If you have a controller with this interface, say Y or M here.
337 This selects the Secure Digital Host Controller Interface in
340 If you have a controller with this interface, say Y or M here.
351 This selects the Tegra SD/MMC controller. If you have a Tegra
361 This selects the Secure Digital Host Controller Interface (SDHCI)
365 If you have a controller with this interface (thereforeyou build for
377 This selects the Marvell(R) PXAV3 SD Host Controller.
391 This selects the Marvell(R) PXAV2 SD Host Controller.
403 This selects the Secure Digital Host Controller Interface (SDHCI)
407 If you have a controller with this interface, say Y or M here.
426 This selects the Broadcom Kona Secure Digital Host Controller
428 This is used in Broadcom mobile SoCs.
430 If you have a controller with this interface, say Y or M here.
437 This selects the Secure Digital Host Controller Interface (SDHCI)
439 If you have a controller with this interface, say Y or M here.
448 This selects the Secure Digital Host Controller Interface (SDHCI)
450 If you have a controller with this interface, say Y or M here.
462 This selects the iProc SD/MMC controller.
474 This provides support for the SD/eMMC controller found in
482 This selects support for the Amlogic SD/MMC Host Controller
483 found on the S905/GX*/AXG family of SoCs. This controller is
486 If you have a controller with this interface, say Y here.
494 This selects support for the SDHC Host Controller on
499 If you have a controller with this interface, say Y or M here.
508 This selects support for the SD/MMC Host Controller on
511 If you have a controller with this interface, say Y or M here.
518 This selects support for the MOXART SD/MMC Host Controller.
521 If you have a controller with this interface, say Y here.
529 This selects the Secure Digital Host Controller Interface in
532 If you have a controller with this interface, say Y or M here.
539 This selects the TI OMAP Multimedia card Interface.
549 This selects the TI OMAP High Speed Multimedia card Interface.
559 This selects the Winbond(R) W83L51xD Secure digital and
578 This selects the AMD Alchemy(R) Multimedia card interface.
587 This selects the Atmel Multimedia Card Interface driver.
601 This selects the Secure Digital Host Controller Interface (SDHCI)
605 If you have a controller with this interface, say Y or M here.
613 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
623 This selects the Freescale SSP MMC controller found on MXS based
636 This option 'selects' (turns on, enables) 'TIFM_CORE', but you
641 To compile this driver as a module, choose M here: the
649 This selects the Marvell SDIO host driver.
653 To compile this driver as a module, choose M here: the
660 This selects the TI DAVINCI Multimedia card Interface.
671 instead of using a "native" MMC/SD/SDIO controller. This has a
685 To compile this driver as a module, choose M here: the
695 This selects the SDIO Host Controller in Spreadtrum
696 SoCs, this driver supports R11(IP version: R11P0).
698 If you have a controller with this interface, say Y or M here.
711 This provides support for the SDHI SD/SDIO controller found in
719 This provides DMA support for SDHI SD/SDIO controllers
720 using SYS-DMAC via DMA Engine. This supports the controllers
729 This provides DMA support for SDHI SD/SDIO controllers
730 using on-chip bus mastering. This supports the controllers
731 found in arm64 based SoCs. This controller is also found in
740 This provides support for the SD/eMMC controller found in
741 UniPhier SoCs. The eMMC variant of this controller is used
749 This option enables support for MMC/SD part of ENE CB710/720 Flash
753 This driver can also be built as a module. If so, the module
760 This selects the VIA SD/MMC Card Reader driver, say Y or M here.
762 some motherboards manufactured by VIA. This card reader supports
764 If you have a controller with this interface, say Y or M here.
772 This selects Cavium OCTEON SD/MMC card Interface.
784 This selects Cavium ThunderX SD/MMC Card Interface.
793 This selects support for the Synopsys DesignWare Mobile Storage IP
794 block, this provides host support for SD and MMC interfaces, in both
802 This selects the common helper functions support for Host Controller
803 Interface based platform driver. Please select this option if the IP
804 is present as a platform device. This is the common interface for the
807 If you have a controller with this interface, say Y or M here.
816 This selects support for Mellanox BlueField SoC specific extensions to
817 the Synopsys DesignWare Memory Card Interface driver. Select this
825 This selects support for Samsung Exynos SoC specific extensions to the
826 Synopsys DesignWare Memory Card Interface driver. Select this option
834 This selects support for HiSilicon Hi3798CV200 SoC specific extensions to the
835 Synopsys DesignWare Memory Card Interface driver. Select this option
843 This selects support for HiSilicon Hi3798MV200 SoC specific extensions to the
844 Synopsys DesignWare Memory Card Interface driver. Select this option
852 This selects support for Hisilicon K3 SoC specific extensions to the
853 Synopsys DesignWare Memory Card Interface driver. Select this option
860 This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
861 Select this option if the IP is present on PCI platform.
863 If you have a controller with this interface, say Y or M here.
872 This selects support for Rockchip SoC specific extensions to the
873 Synopsys DesignWare Memory Card Interface driver. Select this option
882 This selects support for StarFive JH7110 SoC specific extensions to the
883 Synopsys DesignWare Memory Card Interface driver. Select this option
890 This selects the MMC Host Interface controller (MMCIF) found in various
898 This selects support for the SD/MMC controller on Ingenic
908 This selects support for Elan Digital Systems' VUB300 chip.
928 To compile this mmc host controller driver as a module,
939 This selects support for USB SD Host Controllers based on
943 CSR boards with this device include: USB<>SDIO (M1985v2),
954 This selects support for the SD/MMC Host Controller on
957 To compile this driver as a module, choose M here: the
964 This selects support for the Renesas USDHI6ROL0 SD/SDIO
986 This selects support for the SD/MMC Host Controller on
993 This selects the Command Queue Host Controller Interface (CQHCI)
996 This controller supports eMMC devices with command queue support.
998 If you have a controller with this interface, say Y or M here.
1005 This selects the MMC Host Software Queue support. This may increase
1008 If you have a controller/driver supporting this interface, say Y or M
1021 This selects the BCM2835 SDHOST MMC controller. If you have
1026 sdhost controller (supported by this driver).
1038 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
1040 This is needed if support for any SD/SDIO/MMC devices is required.
1047 This selects the Secure Digital Host Controller Interface (SDHCI)
1050 If you have a controller with this interface, say Y or M here.
1061 This selects support for the SDIO/SD/MMC Host Controller on
1070 This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1071 If you have a controller with this interface, say Y or M here.
1082 This selects the Secure Digital Host Controller Interface (SDHCI)
1086 If you have a controller with this interface, say Y or M here.
1098 This selects the Secure Digital Host Controller Interface (SDHCI)
1102 If you have a controller with this interface, say Y or M here.
1111 This selects support for the SD/MMC Host Controller on
1123 This selects support for the MMC Host Controller found in LiteX SoCs.
1125 To compile this driver as a module, choose M here: the