Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- A

Merge tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path

MMC host:
- dw_mmc:
- A great amount of cleanups/simplifications to improve the code
- Add clk_phase_map support
- Remove mshc DT alias support
- dw_mmc-rockchip:
- Fix runtime PM support for internal phase
- Add support for the RV1103B variant
- loongson2:
- Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd:
- Add support for the MT8189 variant
- renesas_sdhi_core:
- Add support for selecting an optional mux
- rtsx_pci_sdmmc:
- Simplify voltage switch handling
- sdhci:
- Stop advertising the driver in dmesg
- sdhci-esdhc-imx:
- Add 1-bit bus width support
- Add support for the NXP S32N79 variant
- sdhci-msm:
- Add support for the IPQ5210 and IPQ9650 variants
- Add support for wrapped keys
- Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan:
- Add support for the Axiado AX3000 variant
- sdhci-of-aspeed:
- Add support for the AST2700 variant
- sdhci-of-bst:
- Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc:
- Add support for the Canaan K230 variant
- Add support for the HPE GSC variant
- Prevent clock glitches to avoid malfunction
- sdhci-of-k1:
- Add support for the K3 variant

mux core/consumers:
- core:
- Add helper functions for getting optional and selected mux-state
- i2c-omap:
- Convert to devm_mux_state_get_optional_selected()
- phy-renesas:
- Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver:
- Convert to devm_mux_state_get_optional()"

* tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits)
mmc: sdhci-msm: Fix the wrapped key handling
mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration
mmc: core: Simplify with scoped for each OF child loop
mmc: core: Optimize size of struct mmc_queue_req
mmc: vub300: clean up module init
mmc: vub300: rename probe error labels
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops
mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support
mmc: mmc_test: use kzalloc_flex
mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189
dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema
dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible
mmc: block: use single block write in retry
...

show more ...

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

mmc: sdhci-pic32: allow driver to be compiled with COMPILE_TEST

This driver currently only supports builds against a PIC32 target. Now
that commit d6618d277c1a ("mmc: sdhci-pic32: update include to

mmc: sdhci-pic32: allow driver to be compiled with COMPILE_TEST

This driver currently only supports builds against a PIC32 target. Now
that commit d6618d277c1a ("mmc: sdhci-pic32: update include to use
pic32.h from platform_data") is merged, it's possible to compile this
driver on other architectures.

To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.

Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci: add Black Sesame Technologies BST C1200 controller driver

Add SDHCI controller driver for Black Sesame Technologies C1200 SoC.

This driver supports the DWCMSHC SDHCI controller with BST

mmc: sdhci: add Black Sesame Technologies BST C1200 controller driver

Add SDHCI controller driver for Black Sesame Technologies C1200 SoC.

This driver supports the DWCMSHC SDHCI controller with BST-specific
enhancements including:
- Custom clock management and tuning
- Power management support
- BST-specific register configurations
- Support for eMMC and SD card interfaces
- Hardware limitation workaround for 32-bit DMA addressing

The driver addresses specific hardware constraints where:
- System memory uses 64-bit bus, eMMC controller uses 32-bit bus
- eMMC controller cannot access memory through SMMU due to hardware bug
- All system DRAM is configured outside 4GB boundary (ZONE_DMA32)
- Uses SRAM-based bounce buffer within 32-bit address space

Signed-off-by: Ge Gordon <gordon.ge@bst.ai>
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get bug fixes from v6.19-rc7.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes from perf-tools.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.

Other changes are small fixes.

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge branch 'v6.19-rc8'

Update to avoid conflicts with /urgent patches.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already have this
support for some SPI NOR devices.

Among the few spi-mem patches, they are needed for building the SPI NAND
changes (especially the ODTR introduction at the end) and therefore an
immutable tag will be needed for merging in the MTD tree (unless all the
series goes through MTD directly ofc).

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge tag 'v6.19-rc5' into drm-rust-next

We need the drm-rust fixes from -rc5 in here for nova-core to build on
top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Merge branch 'for-linus' into for-next

Pull 6.19-devel branch for applying cirrus scodec test patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc5

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Au

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc5

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with m

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with multiple PMICs where individual rails of each act
as required supplies for rails of the other (due to the latter being
e.g. always-on), and vice-versa.

Google Pixel 6 and 6 Pro (oriole and raven) are examples of such
designs.

Rather than returning -EPORBE_DEFER in regulator_register() when
set_machine_constraints() fails with -EPROBE_DEFER (due to missing
required supplies), we still allow rail registration and try to
reresolve supplies each time a new rail gets registered.

This is implemented using a bus (regulator bus), which allows the core
to reresolve supplies for regulators that still need them whenever new
regulators (i.e. devices) are added.

Using a bus also solves existing problems around late resolution of
supplies as mentioned in the commit message introducing that bus.

The series starts with a few bug fixes and the last two commits
implement the changes mentioned above, but do depend on the bug fixes.

show more ...

Merge tag 'v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 6.19-rc5

Pull in upstream shared GPIO fixes into the v7.0 branch.

Merge drm/drm-next into drm-xe-next

Bring some drm-scheduler patches to Xe.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related functions thanks to the usage of pm_ptr.

show more ...

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW con

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW configurations. This limitation prevents userspace and
upper-layer software from obtaining accurate bandwidth information,
which impacts traffic scheduling decisions.

This series addresses this by:

1. Adding mlx5 internal logic to calculate and propagate the effective
aggregated LAG speed to all attached vports. The vport speeds are
dynamically updated when LAG member link states change.

2. Extending RDMA core with a new ib_query_port_speed() verb and an
IB_EVENT_DEVICE_SPEED_CHANGE async event. These interfaces expose
the effective port speed to userspace, supporting speeds that are
not expressible as IB speed * width (where width is 2^n).

This series enables userspace applications to query the effective
port speed and receive notifications on speed changes in real-time.
In LAG configurations, each mlx5 port reports the aggregated bandwidth
of all active LAG members.

Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge tag 'v6.19-rc3' into driver-core-next

We need the driver-core fixes in here as well to build on top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Merge 6.19-rc3 into tty-next

We need the serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.19-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>