Lines Matching +full:mode +full:- +full:bootloader

1 # SPDX-License-Identifier: GPL-2.0-only
42 	  Used to configure the EBI (external bus interface) when the device-
68 	bool "Baikal-T1 CM2 L2-RAM Cache Control Block"
72 	  Baikal-T1 CPU is based on the MIPS P5600 Warrior IP-core. The CPU
73 	  resides Coherency Manager v2 with embedded 1MB L2-cache. It's
75 	  tags and way-select latencies of RAM access. This driver provides a
76 	  dt properties-based and sysfs interface for it.
85 	  is intended to provide a glue-less interface to a variety of
99 	  functions of the driver includes re-configuring AC timing
118 	  Enables verbose debugging mostly to decode the bootloader provided
119 	  timings. To preserve the bootloader provided timings, the reset
123 	  NOTE: In addition to matching the register setup with the bootloader
125 	  bootloader or else the GPMC timings won't be identical with the
126 	  bootloader timings.
135 	  the EMIF PM code must run from on-chip SRAM late in the suspend
209 	tristate "Renesas RPC-IF driver"
214 	  This supports Renesas R-Car Gen3 or RZ/G2 RPC-IF which provides
234 	  - direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
236 	  - OSPI1 and OSPI2 are multiplexed over the same output port 1
237 	  - swapped mode (no multiplexing), OSPI1 output is on port 2,
239 	  - OSPI1 and OSPI2 are multiplexed over the same output port 2
241 	    - the split of the memory area shared between the 2 OSPI instances.
242 	    - chip select selection override.
243 	    - the time between 2 transactions in multiplexed mode.