Lines Matching +full:bootloader +full:- +full:config
1 # SPDX-License-Identifier: GPL-2.0-only
17 config DDR
25 config ARM_PL172_MPMC
33 config ATMEL_EBI
42 Used to configure the EBI (external bus interface) when the device-
46 config BRCMSTB_DPFE
58 config BRCMSTB_MEMC
67 config BT1_L2_CTL
68 bool "Baikal-T1 CM2 L2-RAM Cache Control Block"
72 Baikal-T1 CPU is based on the MIPS P5600 Warrior IP-core. The CPU
73 resides Coherency Manager v2 with embedded 1MB L2-cache. It's
75 tags and way-select latencies of RAM access. This driver provides a
76 dt properties-based and sysfs interface for it.
78 config TI_AEMIF
85 is intended to provide a glue-less interface to a variety of
90 config TI_EMIF
99 functions of the driver includes re-configuring AC timing
103 config OMAP_GPMC
114 config OMAP_GPMC_DEBUG
118 Enables verbose debugging mostly to decode the bootloader provided
119 timings. To preserve the bootloader provided timings, the reset
123 NOTE: In addition to matching the register setup with the bootloader
125 bootloader or else the GPMC timings won't be identical with the
126 bootloader timings.
128 config TI_EMIF_SRAM
135 the EMIF PM code must run from on-chip SRAM late in the suspend
139 config FPGA_DFL_EMIF
148 config MVEBU_DEVBUS
159 config FSL_CORENET_CF
169 config FSL_IFC
174 config JZ4780_NEMC
183 config MTK_SMI
191 config DA8XX_DDRCTL
199 config PL353_SMC
208 config RENESAS_RPCIF
209 tristate "Renesas RPC-IF driver"
214 This supports Renesas R-Car Gen3 or RZ/G2 RPC-IF which provides
218 config STM32_FMC2_EBI
228 config STM32_OMM
234 - direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
236 - OSPI1 and OSPI2 are multiplexed over the same output port 1
237 - swapped mode (no multiplexing), OSPI1 output is on port 2,
239 - OSPI1 and OSPI2 are multiplexed over the same output port 2
241 - the split of the memory area shared between the 2 OSPI instances.
242 - chip select selection override.
243 - the time between 2 transactions in multiplexed mode.