Lines Matching +full:dpi +full:- +full:to +full:- +full:lvds
1 # SPDX-License-Identifier: GPL-2.0-only
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
26 This driver supports the ARM Versatile panels connected to ARM
36 Say Y here if you want to enable support for the ASUS TMP5P5
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
49 tristate "Boe BF060Y8M-AJ0 panel"
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
76 Say Y here if you want to enable support for BOE TD4320 1080x2340
80 tristate "Boe TH101MB31UIG002-28A panel"
85 Say Y here if you want to enable support for Boe
86 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
88 interface to the host and has a built-in LED backlight.
96 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
105 Say Y here if you want to support for BOE TV101WUM-LL2
114 Say Y here if you want to enable support for the EBBG FT8719
117 interface to the host.
125 Say Y here if you want to enable support for the Elida
126 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
135 Say Y here if you want to enable support for the Feixin K101 IM2BA02
136 4-lane 800x1280 MIPI DSI panel.
139 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
144 Say Y if you want to enable support for panels based on the
145 Feiyang FY07024DI26A30-D MIPI-DSI interface.
157 tristate "Generic LVDS panel driver"
162 This driver supports LVDS panels that don't require device-specific
164 backlight handling if the panel is attached to a backlight controller.
167 tristate "Himax HX8279-based panels"
172 Say Y if you want to enable support for panels based on the
174 7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
178 tristate "Himax HX83102-based panels"
183 Say Y if you want to enable support for panels based on the
187 tristate "Himax HX83112A-based DSI panel"
193 Say Y here if you want to enable support for Himax HX83112A-based
197 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
202 Say Y if you want to enable support for panels based on the
204 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
206 If M is selected the module will be called panel-himax-hx8394.
213 Say Y here if you want to enable support for Ilitek IL9322
214 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
224 Say Y here if you want to enable support for Ilitek IL9341
229 tristate "Ilitek ILI9805-based panels"
234 Say Y if you want to enable support for panels based on the
238 tristate "Ilitek ILI9806E-based panels"
243 Say Y if you want to enable support for panels based on the
247 tristate "Ilitek ILI9881C-based panels"
252 Say Y if you want to enable support for panels based on the
256 tristate "Ilitek ILI9882t-based panels"
261 Say Y if you want to enable support for panels based on the
269 Say Y here to enable support for the Innolux/Chimei EJ030NA
270 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
279 Say Y here if you want to enable support for Innolux P079ZCA
280 TFT-LCD modules. The panel has a 1024x768 resolution and uses
281 24 bit RGB per pixel. It provides a MIPI DSI interface to
282 the host and has a built-in LED backlight.
285 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
290 Say Y here if you want to enable support for Jadard JD9365DA-H3
300 Say Y here if you want to enable support for JDI LPM102A188A DSI
303 to the host.
311 Say Y here if you want to enable support for JDI DSI video mode
322 Say Y here if you want to enable support for the JDI R63452
331 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
333 24 bit RGB per pixel. It provides a MIPI DSI interface to
334 the host, a built-in LED backlight and touch controller.
342 Say Y here if you want to enable support for Kingdisplay kd097d04
343 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
344 24 bit RGB per pixel. It provides a MIPI DSI interface to
345 the host and has a built-in LED backlight.
353 Say Y here if you want to enable support for Leadtek LTK050H3146W
354 TFT-LCD modules. The panel has a 720x1280 resolution and uses
355 24 bit RGB per pixel. It provides a MIPI DSI interface to
356 the host and has a built-in LED backlight.
364 Say Y here if you want to enable support for Kingdisplay kd097d04
365 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
366 24 bit RGB per pixel. It provides a MIPI DSI interface to
367 the host and has a built-in LED backlight.
375 Say Y here if you want to enable support for lincolntech lcd197
376 TFT-LCD modules. The panel has a 1080x1920 resolution and uses
377 24 bit RGB per pixel. It provides a MIPI DSI interface to
384 Say Y here if you want to enable support for the LB035Q02 RGB panel
385 (found on the Gumstix Overo Palo35 board). To compile this driver as
393 Say Y here if you want to enable support for LG4573 RGB panel.
394 To compile this driver as a module, choose M here.
404 Say Y here if you want to enable support for LG sw43408 panel.
406 pixel. It provides a MIPI DSI interface to the host and has a
407 built-in LED backlight.
418 video data via DSI but commands via 9-bit SPI using DBI.
421 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
426 Say Y here if you want to enable support for the Mantix
427 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
435 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
436 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
454 Say Y here if you want to enable support for the panels built
463 Say Y here if you want to enable support for the panels built
474 Say Y here if you want to enable the Novatek NT35560 display
485 Say Y here if you want to enable support for the panels built
496 Say Y here if you want to enable support for the panels built
506 Say Y here if you want to enable support for the panels built
516 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
528 Say Y here if you want to enable support for Novatek NT37801 (or
538 Say Y here if you want to enable support for the panels built
542 tristate "Olimex LCD-OLinuXino panel"
548 The panel is used with different sizes LCDs, from 480x272 to
551 Say Y here if you want to enable support for Olimex Ltd.
552 LCD-OLinuXino panel.
560 Say Y here if you want to enable support for the panels built
569 Say Y here if you want to enable support for Orise Technology
573 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
578 Say Y here if you want to enable support for One Stop Displays
579 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
587 Say Y here if you want to enable support for Panasonic VVX10F034N00
588 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
592 tristate "Raspberry Pi 7-inch touchscreen panel"
595 Say Y here if you want to enable support for the Raspberry
596 Pi 7" Touchscreen. To compile this driver as a module,
605 Say Y here if you want to enable support for Raydium RM67191 FHD
609 tristate "Raydium RM67200-based DSI panel"
613 Say Y here if you want to enable support for Raydium RM67200-based
624 Say Y here if you want to enable support for Raydium RM68200
628 tristate "Raydium RM692E5-based DSI panel"
635 Say Y here if you want to enable support for Raydium RM692E5-based
639 tristate "Raydium RM69380-based DSI panel"
644 Say Y here if you want to enable support for Raydium RM69380-based
656 Say Y here if you want to enable support for Ronbo Electronics
665 Say Y or M here if you want to enable support for the
674 Say Y or M here if you want to enable support for the
683 Say Y here if you want to enable support for Samsung AMS427AP24 panel
685 GT-I9195I). To compile this driver as a module, choose M here.
704 sequencing is non-standard.
707 tristate "Samsung DB7430-based DPI panels"
712 Say Y here if you want to enable support for the Samsung
713 DB7430 DPI display controller used in such devices as the
714 LMS397KF04 480x800 DPI panel.
728 Say Y here if you want to enable support for the Samsung S6E3FA7
738 tristate "Samsung S6D27A1 DPI panel driver"
742 Say Y here if you want to enable support for the Samsung
743 S6D27A1 DPI 480x800 panel.
746 GT-I8160 mobile phone.
749 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
782 Say Y here if you want to enable support for Samsung S6E63M0
793 Say Y here if you want to be able to access the Samsung
801 Say Y here if you want to be able to access the Samsung
817 Say Y or M here if you want to enable support for the Samsung AMOLED
828 Say Y here if you want to enable support for the Seiko
837 Say Y here if you want to enable support for Sharp LQ101R1SX01
838 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
839 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
840 the host and has a built-in LED backlight.
842 To compile this driver as a module, choose M here: the module
843 will be called panel-sharp-lq101r1sx01.
849 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
858 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
867 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
878 Say Y here if you want to enable support for the Sitronix
888 Say Y here if you want to enable support for Sitronix ST7703 based
892 Touch input support is provided by the goodix driver and needs to be
900 Say Y here if you want to enable support for the Sitronix
908 Say Y here if you want to enable support for the Sony ACX565AKM
917 Say Y here if you want to enable support for the Sony Tama
927 Say Y here if you want to enable support for the Sony Tulip
937 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
938 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
939 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
940 the host, a built-in LED backlight and touch controller.
954 a GPIO to be powered up. Optionally a backlight can be attached so
965 DRM panel driver for dumb non-eDP panels that need at most a regulator
966 and a GPIO to be powered up. Optionally a backlight can be attached so
976 Say Y if you want to enable support for the "Summit" display panel
980 tristate "Synaptics R63353-based panels"
985 Say Y if you want to enable support for panels based on the
994 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
996 24 bit RGB per pixel. It provides a MIPI DSI interface to
997 the host, a built-in LED backlight and touch controller.
1004 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1011 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1019 Say Y here if you want to enable support for TPO TPG110
1020 400CH LTPS TFT LCD Single Chip Digital Driver for up to
1028 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1037 Say Y here if you want to enable support for the Visionox
1048 Say Y here if you want to enable support for Visionox
1056 Say Y here if you want to enable support for Visionox
1067 Say Y here if you want to enable support for Visionox RM692E5 amoled
1077 Say Y here if you want to enable support for Visionox
1081 tristate "Widechips WS2401 DPI panel driver"
1086 Say Y here if you want to enable support for the Widechips WS2401 DPI
1088 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1096 Say Y here if you want to enable support for the Xinpeng