Lines Matching +full:rtd1619b +full:- +full:pinctrl
1 # SPDX-License-Identifier: GPL-2.0-only
47 this symbol, but new drivers should use the generic gpio-regmap
57 non-sleeping contexts. They can make bitbanged serial protocols
126 Enables support for the idio-16 library functions. The idio-16 library
128 ACCES IDIO-16 family such as the 104-IDIO-16 and the PCI-IDIO-16.
130 If built as a module its name will be gpio-idio-16.
136 tristate "GPIO driver for 74xx-ICs with MMIO access"
140 Say yes here to support GPIO functionality for 74xx-compatible ICs
155 If driver is built as a module it will be called gpio-altera.
316 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
319 Say yes here to support basic platform_device memory-mapped GPIO controllers.
322 tristate "Intel Granite Rapids-D vGPIO support"
329 - Intel Granite Rapids-D
337 be called gpio-graniterapids.
355 This GPIO controller supports double-edge interrupt and multi-core
374 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
405 bool "Loongson-2/3 GPIO support"
408 Driver for GPIO functionality on Loongson-2F/3A/3B processors.
457 created by attaching a 16-bit latch to the bus.
513 It is deeply interconnected with the associated pinctrl driver as GPIO
528 Say yes here to support the on-chip GPIO lines on the OCTEON
561 tristate "Renesas R-Car and RZ/G GPIO support"
565 Say yes here to support GPIO on Renesas R-Car or RZ/G SoCs.
585 are grouped in four 8-bit wide ports.
592 A 32-bit single register GPIO fixed in/out implementation. This
612 RTD1319D, RTD1395, RTD1619 and RTD1619B.
628 maintain their value during backup/self-refresh.
646 via a SIOX bus and have a number of fixed-direction I/O lines.
654 This is a single-register MMIO GPIO driver for complex cases
696 - Elkhart Lake
697 - Merrifield
699 If built as a module its name will be gpio-tangier.
728 tristate "TS-4800 DIO blocks and compatibles"
733 This driver support TS-4800 FPGA GPIO controllers.
736 tristate "Cavium ThunderX/OCTEON-TX GPIO"
743 Say yes here to support the on-chip GPIO lines on the ThunderX
744 and OCTEON-TX families of SoCs.
780 bool "APM X-Gene GPIO controller support"
783 This driver is to support the GPIO block within the APM X-Gene SoC
789 tristate "APM X-Gene GPIO standby controller support"
795 This driver supports the GPIO block within the APM X-Gene
837 tristate "ZynqMP ps-mode pin GPIO configuration driver"
841 Say yes here to support the ZynqMP ps-mode pin GPIO configuration
844 This ps-mode pin GPIO driver is based on GPIO framework. PS_MODE
845 is 4-bits boot mode pins. It sets and gets the status of
846 the ps-mode pin. Every pin can be configured as input/output.
856 tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)"
859 as found on G-series SOCs (e.g. GX-412TC).
862 needs to be provided with platform-specific configuration.
873 ARMv7-based SoCs.
882 IDT 79RC3243X-based devices like Mikrotik RB532.
885 be called gpio-idt3243x.
889 menu "Port-mapped I/O GPIO drivers"
915 If built as a module its name will be gpio-i8255.
918 tristate "ACCES 104-DIO-48E GPIO support"
927 Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
928 104-DIO-24E). The base port addresses for the devices may be
933 tristate "ACCES 104-IDIO-16 GPIO support"
939 Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
940 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
946 tristate "ACCES 104-IDI-48 GPIO support"
954 Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
955 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
961 tristate "Fintek and Nuvoton Super-I/O GPIO support"
963 This option enables support for GPIOs found on Fintek Super-I/O
965 As well as Nuvoton Super-I/O chip NCT6126D.
968 be called f7188x-gpio.
971 tristate "Diamond Systems GPIO-MM GPIO support"
977 Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
979 The Diamond Systems GPIO-MM device features 48 lines of digital I/O
1012 active during S3. The suspend-powered GPIOs can be used to wake the
1013 system from the Suspend-to-RAM state.
1019 Twenty-one are powered by the core power rail and 9 from the
1032 be called gpio-sch311x.
1035 tristate "TS-5500 DIO blocks and compatibles"
1040 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
1053 boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
1057 be called gpio-winbond.
1078 tristate "Avionic Design N-bit GPIO expander"
1097 be called gpio-fxl6408.
1104 GPIO driver for ADI DS4520 I2C-based GPIO expander.
1108 be called gpio-ds4520.
1115 Expander. This is used at least on the Cambria GW2358-4.
1121 GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
1124 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
1126 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
1128 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
1153 Say yes here to provide access to several register-oriented
1178 tristate "PCA9570 4-Bit I2C GPO expander"
1183 be called gpio-pca9570.
1190 Say yes here to provide access to most "quasi-bidirectional" I2C
1207 This driver provides an in-kernel interface to those GPIOs using
1208 platform-neutral GPIO calls.
1211 tristate "TPIC2810 8-Bit I2C GPO expander"
1216 be called gpio-tpic2810.
1224 Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.
1234 This option enables support for on-chip GPIO found
1266 will be called gpio-bd71815.
1278 will be called gpio-bd71828.
1289 will be called gpio-bd9571mwv.
1299 called gpio-cgbc.
1309 will be called gpio-cros-ec.
1318 Say Yes if you have a Intel SoC-based tablet with Crystal Cove PMIC
1322 called gpio-crystalcove.
1350 If driver is built as a module it will be called gpio-da9055.
1362 will be called gpio-dln2.
1381 be called gpio-elkhartlake.
1384 tristate "Janz VMOD-TTL Digital IO Module"
1387 This enables support for the Janz VMOD-TTL Digital IO module.
1399 called gpio-kempld.
1411 will be called gpio-ljca.
1429 called gpio-lp873x.
1439 called gpio-lp87565.
1498 called gpio-sl28cpld.
1531 they are input-only or output-only type.
1534 module will be called gpio-tn48m.
1591 There are 7 GPIOs and few sensor-related GPIOs supported
1597 tristate "TQ-Systems TQMx86 GPIO"
1608 Say yes here to access the GPIO signals of various multi-function
1625 Say Yes if you have an Intel SoC-based tablet with Whiskey Cove PMIC
1629 called gpio-wcove.
1677 This chip can be found on Miro, Hauppauge and STB TV-cards.
1682 Documentation/driver-api/gpio/bt8xxgpio.rst
1717 This controller should be used in parallel with pinctrl-mlxbf3 to
1719 This driver can also be built as a module called mlxbf3-gpio.
1728 Hub) which is for IVI (In-Vehicle Infotainment) use.
1748 tristate "ACCES PCI-IDIO-16 GPIO support"
1752 Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
1758 tristate "ACCES PCIe-IDIO-24 GPIO support"
1764 Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24,
1765 PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated
1771 tristate "RDC R-321x GPIO support"
1792 tristate "74x164 serial-in/parallel-out 8-bits shift register"
1795 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
1804 MAX31953 and MAX31963 industrial serializer, a daisy-chainable
1813 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
1816 tristate "Freescale MC33880 high-side/low-side switch"
1818 SPI driver for Freescale MC33880 high-side/low-side switch.
1822 tristate "Generic parallel-in/serial-out shift register"
1824 GPIO driver for SPI compatible parallel-in/serial-out shift
1828 tristate "EXAR XRA1403 16-bit GPIO expander"
1831 GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
1875 - Assign permissions for a collection of GPIO lines to a user,
1876 - Export a collection of GPIO lines to a virtual machine,
1877 - Provide a generic driver for a GPIO-operated device in an
1891 This module is DEPRECATED. Please consider using gpio-sim instead.
1896 tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
1904 Say Y here to enable guest support for virtio-based GPIO controllers.
1914 This enables the GPIO simulator - a configfs-based GPIO testing
1926 GPIOs. Use the 'tools/gpio/gpio-sloppy-logic-analyzer' script with
1929 analyzer which can be affected by latencies, non-deterministic code
1934 'gpio-sloppy-logic-analyzer'.
1942 Say Y here to enable the configurable, configfs-based virtual GPIO
1946 hot-unplug handling in GPIOLIB.