Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fix

Merge tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:

- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"

* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...

show more ...

Merge tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support

Merge tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.

Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.

There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.

GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required

New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)

Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim

Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse

Tests:
- add selftests for use-after-free cases in GPIO character device
code

DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes

Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs

Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"

* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...

show more ...

Merge tag 'riscv-soc-drivers-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers

RISC-V soc drivers for v7.1

Microchip:
Add coverage for the pic64gx in the

Merge tag 'riscv-soc-drivers-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers

RISC-V soc drivers for v7.1

Microchip:
Add coverage for the pic64gx in the system controller and syscons.
Add a interrupt mux driver (akin to the one that Renesas recently added)
that fixes a problem where the platform never properly modelled gpio
interrupts. There's a gpio driver change here that Bartosz has acked
that adds the interrupt support to the GPIO driver itself.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-soc-drivers-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: microchip: mpfs-sys-controller: add support for pic64gx
dt-bindings: soc: microchip: mpfs-sys-controller: Add pic64gx compatibility
dt-bindings: soc: microchip: add compatible for the mss-top-sysreg on pic64gx

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...

gpio: gpio-by-pinctrl: s/used to do/is used to do/

Add missing "is" to the driver's help text ("used to do" has a
completely different meaning).

Fixes: 7671f4949a6c9111 ("gpio: gpio-by-pinctrl: add

gpio: gpio-by-pinctrl: s/used to do/is used to do/

Add missing "is" to the driver's help text ("used to do" has a
completely different meaning).

Fixes: 7671f4949a6c9111 ("gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/b1ecb31a37f8e35447122554a38985cb6240eb11.1775556619.git.geert+renesas@glider.be
[Bartosz: tweak the help text even more]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

gpio: remove dev-sync-probe

There are no more users. Remove the dev-sync-probe module.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-prob

gpio: remove dev-sync-probe

There are no more users. Remove the dev-sync-probe module.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-4-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

gpio: virtuser: stop using dev-sync-probe

dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the p

gpio: virtuser: stop using dev-sync-probe

dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the platform device to probe.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-3-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

gpio: aggregator: stop using dev-sync-probe

dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the

gpio: aggregator: stop using dev-sync-probe

dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the platform device to probe.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-2-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

gpio: sim: stop using dev-sync-probe

dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the platfo

gpio: sim: stop using dev-sync-probe

dev-err-probe is an overengineered solution to a simple problem. Use a
combination of wait_for_probe() and device_is_bound() to synchronously
wait for the platform device to probe.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-1-efac254f1a1d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

gpio: Add Intel Nova Lake ACPI GPIO events driver

This driver provides support for new way of handling platform events,
through the use of GPIO-signaled ACPI events. This mechanism is used on
Intel

gpio: Add Intel Nova Lake ACPI GPIO events driver

This driver provides support for new way of handling platform events,
through the use of GPIO-signaled ACPI events. This mechanism is used on
Intel client platforms released in 2026 and later, starting with Intel
Nova Lake.

Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260401174526.60881-1-alan.borzeszkowski@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

gpio: mpfs: Add interrupt support

Add support for interrupts to the PolarFire SoC GPIO driver. Each GPIO
has an independent interrupt that is wired to an interrupt mux that sits
between the controll

gpio: mpfs: Add interrupt support

Add support for interrupts to the PolarFire SoC GPIO driver. Each GPIO
has an independent interrupt that is wired to an interrupt mux that sits
between the controllers and the PLIC. The SoC has more GPIO lines than
connections from the mux to the PLIC, so some GPIOs must share PLIC
interrupts. The configuration is not static and is set at runtime,
conventionally by the platform's firmware. CoreGPIO, the version
intended for use in the FPGA fabric has two interrupt output ports, one
is IO_NUM bits wide, as is used in the hardened cores, and the other is
a single bit with all lines ORed together.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

show more ...

gpio: fix up CONFIG_OF dependencies

A number of GPIO drivers that used to have a CONFIG_OF_GPIO dependency now fail
to build on targets without CONFIG_OF:

WARNING: unmet direct dependencies detecte

gpio: fix up CONFIG_OF dependencies

A number of GPIO drivers that used to have a CONFIG_OF_GPIO dependency now fail
to build on targets without CONFIG_OF:

WARNING: unmet direct dependencies detected for GPIO_SYSCON
Depends on [n]: GPIOLIB [=y] && HAS_IOMEM [=y] && MFD_SYSCON [=y] && OF [=n]
Selected by [y]:
- GPIO_SAMA5D2_PIOBU [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && MFD_SYSCON [=y] && (ARCH_AT91 || COMPILE_TEST [=y])

drivers/gpio/gpio-mt7621.c: In function 'mediatek_gpio_bank_probe':
drivers/gpio/gpio-mt7621.c:254:20: error: 'struct gpio_chip' has no member named 'of_gpio_n_cells'
254 | rg->chip.gc.of_gpio_n_cells = 2;
| ^
drivers/gpio/gpio-tegra186.c: In function 'tegra186_gpio_of_xlate':
drivers/gpio/gpio-tegra186.c:502:25: error: 'struct gpio_chip' has no member named 'of_gpio_n_cells'
502 | if (WARN_ON(chip->of_gpio_n_cells < 2))
| ^~
drivers/gpio/gpio-lpc32xx.c: In function 'lpc32xx_gpio_probe':
drivers/gpio/gpio-lpc32xx.c:523:49: error: 'struct gpio_chip' has no member named 'of_xlate'
523 | lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
| ^
drivers/gpio/gpio-spacemit-k1.c: In function 'spacemit_gpio_add_bank':
drivers/gpio/gpio-spacemit-k1.c:234:11: error: 'struct gpio_chip' has no member named 'of_gpio_n_cells'
234 | gc->of_gpio_n_cells = 3;
| ^~

Bring that back as a dependency.

Fixes: 7803501e5754 ("gpio: drop unneeded Kconfig dependencies on OF_GPIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260325100144.1696731-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

Merge branch 'ib-scmi-pinctrl-gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into gpio/for-next

Pull in the SCMI GPIO driver along with its pinctrl dependencies.

Merge branch 'ib-scmi-pinctrl-gpio' into devel

gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver

The ARM SCMI pinctrl protocol allows GPIO access. Instead of creating
a new SCMI GPIO driver, this driver is a generic GPIO driver that

gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver

The ARM SCMI pinctrl protocol allows GPIO access. Instead of creating
a new SCMI GPIO driver, this driver is a generic GPIO driver that uses
standard pinctrl interfaces.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>

show more ...

gpio: drop unneeded Kconfig dependencies on OF_GPIO

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitl

gpio: drop unneeded Kconfig dependencies on OF_GPIO

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. Remove all Kconfig dependencies/selects for GPIO drivers.
For those that have no other dependencies: convert it to requiring
CONFIG_OF instead to avoid new symbols popping up in make config.

Link: https://patch.msgid.link/20260316-gpio-of-kconfig-v2-3-de2f4b00a0e4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

Do not enable the v1 uAPI by default

It's been five years since we introduced the v2 uAPI and
the major consumer libgpiod is at v2.2.3.

Let's discourage the old ABI.

Signed-off-by: Linus Walleij <

Do not enable the v1 uAPI by default

It's been five years since we introduced the v2 uAPI and
the major consumer libgpiod is at v2.2.3.

Let's discourage the old ABI.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://patch.msgid.link/20260314-no-y-uapi1-default-v2-1-578f09c91b8f@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

gpio: kempld: Implement the interrupt controller

Add a GPIO IRQ chip implementation for the kempld GPIO controller. Of
note is only how the parent IRQ is obtained.

The IRQ for the GPIO controller c

gpio: kempld: Implement the interrupt controller

Add a GPIO IRQ chip implementation for the kempld GPIO controller. Of
note is only how the parent IRQ is obtained.

The IRQ for the GPIO controller can be configured in the BIOS, along
with the IRQ for the I2C controller. These IRQ are returned by ACPI
but this information is only usable if both IRQ are configured. When
only one is configured, only one is returned making it impossible to
know which one it is.

Luckily the BIOS will set the configured IRQ in the PLD registers, so
it can be read from there instead, and that also work on platforms
without ACPI.

The vendor driver allowed to override the IRQ using a module
parameters, so there are boards in field which used this parameter
instead of properly configuring the BIOS. This implementation provides
this as well for compatibility.

Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-5-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO cor

Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.

GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed

New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO

Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127

DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x

Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"

* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)