Lines Matching +full:mt7621 +full:- +full:pinctrl
1 # SPDX-License-Identifier: GPL-2.0-only
47 this symbol, but new drivers should use the generic gpio-regmap
57 non-sleeping contexts. They can make bitbanged serial protocols
126 Enables support for the idio-16 library functions. The idio-16 library
128 ACCES IDIO-16 family such as the 104-IDIO-16 and the PCI-IDIO-16.
130 If built as a module its name will be gpio-idio-16.
136 tristate "GPIO driver for 74xx-ICs with MMIO access"
140 Say yes here to support GPIO functionality for 74xx-compatible ICs
155 If driver is built as a module it will be called gpio-altera.
316 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
319 Say yes here to support basic platform_device memory-mapped GPIO controllers.
322 tristate "Intel Granite Rapids-D vGPIO support"
329 - Intel Granite Rapids-D
337 be called gpio-graniterapids.
355 This GPIO controller supports double-edge interrupt and multi-core
374 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
405 bool "Loongson-2/3 GPIO support"
408 Driver for GPIO functionality on Loongson-2F/3A/3B processors.
457 created by attaching a 16-bit latch to the bus.
476 bool "Mediatek MT7621 GPIO Support"
482 Say yes here to support the Mediatek MT7621 SoC GPIO device.
513 It is deeply interconnected with the associated pinctrl driver as GPIO
528 Say yes here to support the on-chip GPIO lines on the OCTEON
561 tristate "Renesas R-Car and RZ/G GPIO support"
565 Say yes here to support GPIO on Renesas R-Car or RZ/G SoCs.
585 are grouped in four 8-bit wide ports.
592 A 32-bit single register GPIO fixed in/out implementation. This
628 maintain their value during backup/self-refresh.
646 via a SIOX bus and have a number of fixed-direction I/O lines.
654 This is a single-register MMIO GPIO driver for complex cases
696 - Elkhart Lake
697 - Merrifield
699 If built as a module its name will be gpio-tangier.
728 tristate "TS-4800 DIO blocks and compatibles"
733 This driver support TS-4800 FPGA GPIO controllers.
736 tristate "Cavium ThunderX/OCTEON-TX GPIO"
743 Say yes here to support the on-chip GPIO lines on the ThunderX
744 and OCTEON-TX families of SoCs.
780 bool "APM X-Gene GPIO controller support"
783 This driver is to support the GPIO block within the APM X-Gene SoC
789 tristate "APM X-Gene GPIO standby controller support"
795 This driver supports the GPIO block within the APM X-Gene
837 tristate "ZynqMP ps-mode pin GPIO configuration driver"
841 Say yes here to support the ZynqMP ps-mode pin GPIO configuration
844 This ps-mode pin GPIO driver is based on GPIO framework. PS_MODE
845 is 4-bits boot mode pins. It sets and gets the status of
846 the ps-mode pin. Every pin can be configured as input/output.
856 tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)"
859 as found on G-series SOCs (e.g. GX-412TC).
862 needs to be provided with platform-specific configuration.
873 ARMv7-based SoCs.
882 IDT 79RC3243X-based devices like Mikrotik RB532.
885 be called gpio-idt3243x.
889 menu "Port-mapped I/O GPIO drivers"
915 If built as a module its name will be gpio-i8255.
918 tristate "ACCES 104-DIO-48E GPIO support"
927 Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
928 104-DIO-24E). The base port addresses for the devices may be
933 tristate "ACCES 104-IDIO-16 GPIO support"
939 Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
940 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
946 tristate "ACCES 104-IDI-48 GPIO support"
954 Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
955 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
961 tristate "Fintek and Nuvoton Super-I/O GPIO support"
963 This option enables support for GPIOs found on Fintek Super-I/O
965 As well as Nuvoton Super-I/O chip NCT6126D.
968 be called f7188x-gpio.
971 tristate "Diamond Systems GPIO-MM GPIO support"
977 Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
979 The Diamond Systems GPIO-MM device features 48 lines of digital I/O
1012 active during S3. The suspend-powered GPIOs can be used to wake the
1013 system from the Suspend-to-RAM state.
1019 Twenty-one are powered by the core power rail and 9 from the
1032 be called gpio-sch311x.
1035 tristate "TS-5500 DIO blocks and compatibles"
1040 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
1053 boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
1057 be called gpio-winbond.
1078 tristate "Avionic Design N-bit GPIO expander"
1097 be called gpio-fxl6408.
1104 GPIO driver for ADI DS4520 I2C-based GPIO expander.
1108 be called gpio-ds4520.
1115 Expander. This is used at least on the Cambria GW2358-4.
1121 GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
1124 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
1126 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
1128 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
1153 Say yes here to provide access to several register-oriented
1178 tristate "PCA9570 4-Bit I2C GPO expander"
1183 be called gpio-pca9570.
1190 Say yes here to provide access to most "quasi-bidirectional" I2C
1207 This driver provides an in-kernel interface to those GPIOs using
1208 platform-neutral GPIO calls.
1211 tristate "TPIC2810 8-Bit I2C GPO expander"
1216 be called gpio-tpic2810.
1224 Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.
1234 This option enables support for on-chip GPIO found
1266 will be called gpio-bd71815.
1278 will be called gpio-bd71828.
1289 will be called gpio-bd9571mwv.
1299 called gpio-cgbc.
1309 will be called gpio-cros-ec.
1318 Say Yes if you have a Intel SoC-based tablet with Crystal Cove PMIC
1322 called gpio-crystalcove.
1350 If driver is built as a module it will be called gpio-da9055.
1362 will be called gpio-dln2.
1381 be called gpio-elkhartlake.
1384 tristate "Janz VMOD-TTL Digital IO Module"
1387 This enables support for the Janz VMOD-TTL Digital IO module.
1399 called gpio-kempld.
1411 will be called gpio-ljca.
1429 called gpio-lp873x.
1439 called gpio-lp87565.
1498 called gpio-sl28cpld.
1531 they are input-only or output-only type.
1534 module will be called gpio-tn48m.
1591 There are 7 GPIOs and few sensor-related GPIOs supported
1597 tristate "TQ-Systems TQMx86 GPIO"
1608 Say yes here to access the GPIO signals of various multi-function
1625 Say Yes if you have an Intel SoC-based tablet with Whiskey Cove PMIC
1629 called gpio-wcove.
1677 This chip can be found on Miro, Hauppauge and STB TV-cards.
1682 Documentation/driver-api/gpio/bt8xxgpio.rst
1717 This controller should be used in parallel with pinctrl-mlxbf3 to
1719 This driver can also be built as a module called mlxbf3-gpio.
1728 Hub) which is for IVI (In-Vehicle Infotainment) use.
1748 tristate "ACCES PCI-IDIO-16 GPIO support"
1752 Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
1758 tristate "ACCES PCIe-IDIO-24 GPIO support"
1764 Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24,
1765 PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated
1771 tristate "RDC R-321x GPIO support"
1792 tristate "74x164 serial-in/parallel-out 8-bits shift register"
1795 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
1804 MAX31953 and MAX31963 industrial serializer, a daisy-chainable
1813 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
1816 tristate "Freescale MC33880 high-side/low-side switch"
1818 SPI driver for Freescale MC33880 high-side/low-side switch.
1822 tristate "Generic parallel-in/serial-out shift register"
1824 GPIO driver for SPI compatible parallel-in/serial-out shift
1828 tristate "EXAR XRA1403 16-bit GPIO expander"
1831 GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
1875 - Assign permissions for a collection of GPIO lines to a user,
1876 - Export a collection of GPIO lines to a virtual machine,
1877 - Provide a generic driver for a GPIO-operated device in an
1891 This module is DEPRECATED. Please consider using gpio-sim instead.
1896 tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
1904 Say Y here to enable guest support for virtio-based GPIO controllers.
1914 This enables the GPIO simulator - a configfs-based GPIO testing
1926 GPIOs. Use the 'tools/gpio/gpio-sloppy-logic-analyzer' script with
1929 analyzer which can be affected by latencies, non-deterministic code
1934 'gpio-sloppy-logic-analyzer'.
1942 Say Y here to enable the configurable, configfs-based virtual GPIO
1946 hot-unplug handling in GPIOLIB.