Lines Matching +full:canfd +full:- +full:1
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
3 * Copyright 2021-2022 Marek Vasut <marex@denx.de>
6 /dts-v1/;
8 #include "imx8mm-verdin.dtsi"
13 "toradex,verdin-imx8mm-nonwifi",
14 "toradex,verdin-imx8mm",
17 /delete-node/ gpio-keys;
20 compatible = "gpio-leds";
21 pinctrl-names = "default";
22 pinctrl-0 = <&pinctrl_led>;
24 led-1 {
27 linux,default-trigger = "mmc0";
30 led-2 {
33 linux,default-trigger = "heartbeat";
38 compatible = "gpio-beeper";
39 pinctrl-names = "default";
40 pinctrl-0 = <&pinctrl_beeper>;
45 clk_xtal20: clk-xtal20 {
46 compatible = "fixed-clock";
47 #clock-cells = <0>;
48 clock-frequency = <20000000>;
53 #address-cells = <1>;
54 #size-cells = <0>;
55 pinctrl-names = "default";
56 pinctrl-0 = <&pinctrl_ecspi1>;
57 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
61 canfd: can@0 { label
64 interrupt-parent = <&gpio1>;
67 spi-max-frequency = <2000000>;
73 pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>;
74 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>;
80 spi-max-frequency = <25000000>;
83 spidev@1 {
85 reg = <1>;
86 spi-max-frequency = <25000000>;
92 max-speed = <100>;
104 #address-cells = <1>;
105 #size-cells = <1>;
106 compatible = "jedec,spi-nor";
107 spi-max-frequency = <66000000>;
108 spi-rx-bus-width = <4>;
109 spi-tx-bus-width = <4>;
114 gpio-line-names =
126 gpio-line-names =
138 gpio-line-names =
155 gpio-line-names =
159 "CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
167 gpio-line-names =
192 /delete-node/ bridge@2c;
193 /delete-node/ hdmi@48;
194 /delete-node/ touch@4a;
195 /delete-node/ sensor@4f;
196 /delete-node/ eeprom@50;
197 /delete-node/ eeprom@57;
201 pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>,
265 /* CPLD_D[1] */
294 /delete-property/ enable-active-high;
299 /delete-property/ enable-active-high;
308 uart-has-rtscts;
317 pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>;
318 linux,rs485-enabled-at-boot-time;
319 rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;