Lines Matching +full:perst +full:- +full:regs

1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 /dts-v1/;
9 #include "armada-388-clearfog.dtsi"
13 	compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1",
18 		internal-regs {
28 				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
34 	gpio-keys {
35 		compatible = "gpio-keys";
36 		pinctrl-0 = <&rear_button_pins>;
37 		pinctrl-names = "default";
39 		button-0 {
43 			linux,can-disable;
51 	phy-mode = "1000base-x";
53 	fixed-link {
55 		full-duplex;
62 	 *  0-CON3 CLKREQ#
63 	 *  1-CON3 PERST#
64 	 *  2-CON2 PERST#
65 	 *  3-CON3 W_DISABLE
66 	 *  4-CON2 CLKREQ#
67 	 *  5-USB3 overcurrent
68 	 *  6-USB3 power
69 	 *  7-CON2 W_DISABLE
70 	 *  8-JP4 P1
71 	 *  9-JP4 P4
72 	 * 10-JP4 P5
73 	 * 11-m.2 DEVSLP
74 	 * 12-SFP_LOS
75 	 * 13-SFP_TX_FAULT
76 	 * 14-SFP_TX_DISABLE
77 	 * 15-SFP_MOD_DEF0
79 	pcie2-0-clkreq-hog {
80 		gpio-hog;
83 		line-name = "pcie2.0-clkreq";
85 	pcie2-0-w-disable-hog {
86 		gpio-hog;
88 		output-low;
89 		line-name = "pcie2.0-w-disable";
96 	ethernet-switch@4 {
99 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
100 		pinctrl-names = "default";
102 		ethernet-ports {
103 			#address-cells = <1>;
104 			#size-cells = <0>;
106 			ethernet-port@0 {
111 			ethernet-port@1 {
116 			ethernet-port@2 {
121 			ethernet-port@3 {
126 			ethernet-port@4 {
131 			ethernet-port@5 {
134 				phy-mode = "1000base-x";
136 				fixed-link {
138 					full-duplex;
142 			ethernet-port@6 {
146 				phy-mode = "rgmii-id";
148 				fixed-link {
150 					full-duplex;
158 	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
162 	clearfog_dsa0_pins: clearfog-dsa0-pins {
166 	clearfog_spi1_cs_pins: spi1-cs-pins {
170 	rear_button_pins: rear-button-pins {
183 	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;