Lines Matching +full:temperature +full:- +full:enable
16 The contents of the label are free-form.
135 this voltage channel is being used for, and user-space
137 user-space.
143 Enable or disable the sensors.
145 When disabled the sensor read will return -ENODATA.
147 - 1: Enable
148 - 0: Disable
156 - 1: Failed
157 - 0: Ok
262 Only makes sense if the chip supports closed-loop fan speed
272 this fan channel is being used for, and user-space doesn't.
273 In all other cases, the label is provided by user-space.
279 Enable or disable the sensors.
281 When disabled the sensor read will return -ENODATA.
283 - 1: Enable
284 - 0: Disable
292 - 1: Failed
293 - 0: Ok
311 - 0: no fan speed control (i.e. fan at full speed)
312 - 1: manual fan speed control enabled (using `pwmY`)
313 - 2+: automatic fan speed control enabled
322 - 0: DC mode (direct current)
323 - 1: PWM mode (pulse-width modulation)
338 Select which temperature channels affect this PWM output in
350 Define the PWM vs temperature curve.
352 Number of trip points is chip-dependent. Use this for chips
361 Define the PWM vs temperature curve.
363 Number of trip points is chip-dependent. Use this for chips
364 which associate trip points to temperature channels.
376 - 1: CPU embedded diode
377 - 2: 3904 transistor
378 - 3: thermal diode
379 - 4: thermistor
380 - 5: AMD AMDSI
381 - 6: Intel PECI
387 Temperature max value.
395 Maximum temperature alarm flag.
397 - 0: OK
398 - 1: temperature has reached tempY_max
404 Temperature min value.
412 Minimum temperature alarm flag.
414 - 0: OK
415 - 1: temperature has reached tempY_min
421 Temperature hysteresis value for max limit.
425 Must be reported as an absolute temperature, NOT a delta
432 Temperature hysteresis value for min limit.
435 Must be reported as an absolute temperature, NOT a delta
442 Temperature input value.
450 Temperature critical max value, typically greater than
459 Critical high temperature alarm flag.
461 - 0: OK
462 - 1: temperature has reached tempY_crit
468 Temperature hysteresis value for critical limit.
472 Must be reported as an absolute temperature, NOT a delta
479 Temperature emergency max value, for chips supporting more than
480 two upper temperature limits. Must be equal or greater than
489 Emergency high temperature alarm flag.
491 - 0: OK
492 - 1: temperature has reached tempY_emergency
498 Temperature hysteresis value for emergency limit.
502 Must be reported as an absolute temperature, NOT a delta
509 Temperature critical min value, typically lower than
518 Temperature hysteresis value for critical min limit.
522 Must be reported as an absolute temperature, NOT a delta
529 Temperature offset which is added to the temperature reading
538 Suggested temperature channel label.
543 this temperature channel is being used for, and user-space
545 user-space.
551 Historical minimum temperature
559 Historical maximum temperature
579 Enable or disable the sensors.
581 When disabled the sensor read will return -ENODATA.
583 - 1: Enable
584 - 0: Disable
590 Minimum rated temperature.
598 Maximum rated temperature.
680 Enable or disable the sensors.
682 When disabled the sensor read will return -ENODATA.
684 - 1: Enable
685 - 0: Disable
875 Enable or disable the sensors.
878 -ENODATA.
880 - 1: Enable
881 - 0: Disable
911 Enable or disable the sensors.
914 -ENODATA.
916 - 1: Enable
917 - 0: Disable
925 - 0: OK
926 - 1: Humidity limit has been reached
932 Enable or disable the sensors
935 -ENODATA.
937 - 1: Enable
938 - 0: Disable
946 - 1: Failed
947 - 0: Ok
955 Unit: milli-percent (per cent mille, pcm)
966 this humidity channel is being used for, and user-space
968 user-space.
976 Unit: milli-percent (per cent mille, pcm)
984 - 0: OK
985 - 1: Maximum humidity detected
993 Unit: milli-percent (per cent mille, pcm)
1004 Unit: milli-percent (per cent mille, pcm)
1012 - 0: OK
1013 - 1: Minimum humidity detected
1021 Unit: milli-percent (per cent mille, pcm)
1032 Unit: milli-percent (per cent mille, pcm)
1040 Unit: milli-percent (per cent mille, pcm)
1049 - 0: OK
1050 - 1: intrusion detected
1063 - 0: disable
1064 - 1: enable
1072 - 0, off, n: disable
1073 - 1, on, y: enable