Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up perf-tools fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.

Other changes are small fixes.

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge branch 'v6.19-rc8'

Update to avoid conflicts with /urgent patches.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already have this
support for some SPI NOR devices.

Among the few spi-mem patches, they are needed for building the SPI NAND
changes (especially the ODTR introduction at the end) and therefore an
immutable tag will be needed for merging in the MTD tree (unless all the
series goes through MTD directly ofc).

show more ...

BackMerge tag 'v6.19-rc7' into drm-next

Linux 6.19-rc7

This is needed for msm and rust trees.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'v6.19-rc5' into drm-rust-next

We need the drm-rust fixes from -rc5 in here for nova-core to build on
top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Merge branch 'for-linus' into for-next

Pull 6.19-devel branch for applying cirrus scodec test patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc5

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Au

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc5

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with m

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with multiple PMICs where individual rails of each act
as required supplies for rails of the other (due to the latter being
e.g. always-on), and vice-versa.

Google Pixel 6 and 6 Pro (oriole and raven) are examples of such
designs.

Rather than returning -EPORBE_DEFER in regulator_register() when
set_machine_constraints() fails with -EPROBE_DEFER (due to missing
required supplies), we still allow rail registration and try to
reresolve supplies each time a new rail gets registered.

This is implemented using a bus (regulator bus), which allows the core
to reresolve supplies for regulators that still need them whenever new
regulators (i.e. devices) are added.

Using a bus also solves existing problems around late resolution of
supplies as mentioned in the commit message introducing that bus.

The series starts with a few bug fixes and the last two commits
implement the changes mentioned above, but do depend on the bug fixes.

show more ...

Merge tag 'v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 6.19-rc5

Pull in upstream shared GPIO fixes into the v7.0 branch.

Merge 6.19-rc5 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: nau8821: Fixes and driver cleanup

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

This series provides several fixes and cleanup patches for the Nuvoton
NAU88L21 audi

ASoC: nau8821: Fixes and driver cleanup

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

This series provides several fixes and cleanup patches for the Nuvoton
NAU88L21 audio codec driver.

Testing and validation has been performed on Valve Steam Deck.

show more ...

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related functions thanks to the usage of pm_ptr.

show more ...

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW con

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW configurations. This limitation prevents userspace and
upper-layer software from obtaining accurate bandwidth information,
which impacts traffic scheduling decisions.

This series addresses this by:

1. Adding mlx5 internal logic to calculate and propagate the effective
aggregated LAG speed to all attached vports. The vport speeds are
dynamically updated when LAG member link states change.

2. Extending RDMA core with a new ib_query_port_speed() verb and an
IB_EVENT_DEVICE_SPEED_CHANGE async event. These interfaces expose
the effective port speed to userspace, supporting speeds that are
not expressible as IB speed * width (where width is 2^n).

This series enables userspace applications to query the effective
port speed and receive notifications on speed changes in real-time.
In LAG configurations, each mlx5 port reports the aggregated bandwidth
of all active LAG members.

Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge tag 'v6.19-rc3' into driver-core-next

We need the driver-core fixes in here as well to build on top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Merge 6.19-rc3 into tty-next

We need the serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.19-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Upstream is on rc5, we're still on rc1. No luck in hoping for a
fast-forward, time to backmerge!

Signed-off-by: Maarten Lankhorst <d

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Upstream is on rc5, we're still on rc1. No luck in hoping for a
fast-forward, time to backmerge!

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'asoc-fix-v6.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

A moderately large collection of fixes since I missed a week, pl

Merge tag 'asoc-fix-v6.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

A moderately large collection of fixes since I missed a week, plus a few
new device IDs and quirks. It's all fairly minor, including a bunch of
work on the device tree bindings fixes which have no runtime effect.

There's one SoundWire change here exporting a symbol which was required
for a fix to the ASoC SoundWire code.

show more ...

ASoC: codecs: wsa88xx: fix codec initialisation

Merge series from Johan Hovold <johan@kernel.org>:

The soundwire update_status() callback may be called multiple times with
the same ATTACHED status

ASoC: codecs: wsa88xx: fix codec initialisation

Merge series from Johan Hovold <johan@kernel.org>:

The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.

This series fixes the Qualcomm wsa88xx codec drivers that do unnecessary
reinitialisation or potentially fail to initialise at all.

Included is also a related clean up suppressing a related codec variant
printk.

show more ...

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"Just a bunch of fixes, mostly trivial ones in tools/virtio"

* tag 'for_lin

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"Just a bunch of fixes, mostly trivial ones in tools/virtio"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/vsock: improve RCU read sections around vhost_vsock_get()
tools/virtio: add device, device_driver stubs
tools/virtio: fix up oot build
virtio_features: make it self-contained
tools/virtio: switch to kernel's virtio_config.h
tools/virtio: stub might_sleep and synchronize_rcu
tools/virtio: add struct cpumask to cpumask.h
tools/virtio: pass KCFLAGS to module build
tools/virtio: add ucopysize.h stub
tools/virtio: add dev_WARN_ONCE and is_vmalloc_addr stubs
tools/virtio: stub DMA mapping functions
tools/virtio: add struct module forward declaration
tools/virtio: use kernel's virtio.h
virtio: make it self-contained
tools/virtio: fix up compiler.h stub

show more ...

tools/virtio: fix up oot build

oot build tends to help uncover bugs so it's worth keeping around,
as long as it's low effort.
add stubs for a couple of macros virtio gained recently,
and disable vdp

tools/virtio: fix up oot build

oot build tends to help uncover bugs so it's worth keeping around,
as long as it's low effort.
add stubs for a couple of macros virtio gained recently,
and disable vdpa in the test build.

Message-ID: <33968faa7994b86d1f78057358a50b8f460c7a23.1764873799.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tools/virtio: pass KCFLAGS to module build

Update the mod target to pass KCFLAGS with the in-tree vhost driver
include path. This way vhost_test can find vhost headers.

Created using Cursor CLI.

M

tools/virtio: pass KCFLAGS to module build

Update the mod target to pass KCFLAGS with the in-tree vhost driver
include path. This way vhost_test can find vhost headers.

Created using Cursor CLI.

Message-ID: <5473e5a5dfd2fcd261a778f2017cac669c031f23.1764873799.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.