Merge drm/drm-next into drm-xe-next

Sync some i915/display changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next to v7.2-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.

If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

show more ...

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
dro

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
drop the unused initializer in the platform_device_id table for
sh_mtu2 (Uwe Kleine-König)

- Remove redundant dev_err()/dev_err_probe() messages when
devm_request_*_irq() fails, as the helper already logs an error
message (Pan Chuang)

- Fix a boot hang on Allwinner D1 when a forced minimum delta is used
with the sun4i timer (Felix Yan)

- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the
IRQ on failure in the NXP PIT driver (WenTao Liang)

- Fix incorrect unmapping of shared MMIO between the clocksource and
clockevent drivers. If one of them fails to initialize, the error
path unmaps the shared MMIO region, leaving the other driver with an
invalid mapping on clps711x (Guangshuo Li)

- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing
regular spinlocks with raw_spinlock_t in atomic contexts (Marek
Szyprowski)

- Use __raw_readl() and __raw_writel() instead of ioread32() and
iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam
Adilov)

- Fix a missing clk_disable_unprepare() call in the timer
initialization error path of the Armada driver (Yuho Choi)

Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.3 merge window.

Merge tag 'v7.2-rc3' into next

Sync up with mainline to pull in stable fixes to avoid merge conflicts.

Merge drm/drm-fixes into drm-misc-fixes

Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

Merge branch 'next' into for-linus

Prepare input updates for 7.2 merge window.

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2.

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2. The PR contains
a build-time dependency of one of the GPIO commits that will follow.

show more ...

Merge tag 'trace-tools-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull RTLA tool updates from Steven Rostedt:

- Fix discrepancy in --dump-tasks option

Due to a mi

Merge tag 'trace-tools-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull RTLA tool updates from Steven Rostedt:

- Fix discrepancy in --dump-tasks option

Due to a mistake, rtla-timerlat-hist used the CLI syntax
"--dump-task" instead of the documented "--dump-tasks". Change the
option to match both documentation and the other timerlat tool,
rtla-timerlat-top.

- Extend coverage of runtime tests

Cover both top and hist tools in all applicable test cases, add tests
for a few uncovered options, and extend checks for some existing
tests.

- Add unit tests for actions

rtla's actions feature is implemented in its source file and contains
non-trivial parsing logic. Cover it with unit tests.

- Stop record trace on interrupt

Fix a bug where an interval exists after receiving a signal in which
the main instance is stopped but the record instance is not, leading
to discrepancies in reported results and sometimes rtla hanging.

- Restore continue flag in actions_perform()

Fix a bug where rtla always continues tracing after hitting a
threshold even if the continue action was triggered just once, and
add tests verifying that the flag is reset properly.

- Migrate command line interface to libsubcmd

Replace rtla's argument parsing using getopt_long() with libsubcmd,
used by perf and objtool, to reuse existing code and auto-generate
better help messages. Extensive unit tests are included to detect
regressions.

- Add -A/--aligned option to timerlat tools

Add an option to align timerlat threads, based on the recently
introduced TIMERLAT_ALIGN option of the timerlat tracer, together
with unit tests and documentation.

- Document tests in README

Document how to run unit and runtime tests in rtla's README.txt,
including the dependencies needed to run them.

* tag 'trace-tools-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
rtla: Document tests in README
Documentation/rtla: Add -A/--aligned option
rtla/tests: Add unit tests for -A/--aligned option
rtla/timerlat: Add -A/--aligned CLI option
rtla/tests: Add unit tests for CLI option callbacks
rtla/tests: Add unit tests for _parse_args() functions
rtla: Parse cmdline using libsubcmd
tools subcmd: allow parsing distinct --opt and --no-opt
tools subcmd: support optarg as separate argument
rtla: Add libsubcmd dependency
rtla/tests: Add runtime tests for restoring continue flag
rtla/tests: Run runtime tests in temporary directory
rtla/tests: Add unit test for restoring continue flag
rtla/actions: Restore continue flag in actions_perform()
rtla: Stop the record trace on interrupt
rtla/tests: Add unit tests for actions module
rtla/tests: Add runtime tests for -C/--cgroup
rtla/tests: Add runtime test for -k and -u options
rtla/tests: Add runtime test for -H/--house-keeping
rtla/tests: Cover all hist options in runtime tests
...

show more ...

Merge tag 'v7.1-rc6' into next

Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.

rtla/tests: Add unit tests for CLI option callbacks

In addition to testing all tool_parse_args() functions, test also all
callbacks used for parsing custom option formats.

The callbacks represent a

rtla/tests: Add unit tests for CLI option callbacks

In addition to testing all tool_parse_args() functions, test also all
callbacks used for parsing custom option formats.

The callbacks represent a middle layer between the parsing functions
and utility functions dedicated to checking specific argument formats,
for example, scheduling class and duration. Callback tests are run
before parsing functions to make sure any issue in the former is
reported before it is encountered through the latter.

Tests verify both successful parsing and proper rejection of invalid
inputs (via exit tests). To enable testing static callbacks, a pragma
once guard is added to timerlat.h for safe inclusion by cli_p.h.

Add dependency of UNIT_TESTS_IN on LIBSUBCMD_INCLUDES, as the new test
file tests/unit/cli_opt_callback.c includes cli_p.h which includes
subcmd/parse-options.h.

Link: https://lore.kernel.org/r/20260528103254.2990068-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>

show more ...

rtla/tests: Add unit tests for _parse_args() functions

Add a test suite for the _parse_args() function of each tool that checks
the params structures (struct common_params, struct osnoise_params,
st

rtla/tests: Add unit tests for _parse_args() functions

Add a test suite for the _parse_args() function of each tool that checks
the params structures (struct common_params, struct osnoise_params,
struct timerlat_params) returned by them for correctness.

One test case is added per option, as well as a few special cases for
tricky combinations of options. Test cases are ordered the same as the
option arrays and help message to allow easy checking of whether all
options are covered.

This should help clarify what the proper command line behavior of RTLA
is in case there are holes in the documentation and verify that the
intended behavior is implemented correctly.

A few necessary changes to the unit tests were done as part of this
commit:

- Unit tests now also link to libsubcmd and its dependencies.
- A new global variable in_unit_test is added to RTLA's CLI interface,
causing it to skip check for root if running in unit tests. This
allows the CLI unit tests to run as non-root, like existing unit
tests.

There is quite a lot of duplication, some of it is mitigated with macros,
but partially it is intentional so that future changes in behavior are
tracked across tools.

Link: https://lore.kernel.org/r/20260528103254.2990068-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>

show more ...

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required fo

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required for the next UBWC
patches.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge branch 'linus' into timers/clocksource

... to bring it up to date for new changes.

rtla/tests: Add unit tests for actions module

Add unit tests covering all functions in the actions module, including
both valid and invalid inputs and all action types, except for
actions_perform(),

rtla/tests: Add unit tests for actions module

Add unit tests covering all functions in the actions module, including
both valid and invalid inputs and all action types, except for
actions_perform(), where only shell and continue actions are tested.

To support testing multiple modules, the unit test build was modified so
that it links the entire rtla-in.o file. For this to work, the main()
function in rtla.c was declared weak, so that the unit test main is able
to override it.

Other included minor changes to unit tests are:

- Make unit test output verbose to show which tests are being run, now
that we have more than 3 tests.
- Add unit_tests file to .gitignore.
- Split unit test sources to one file per test suite, and keep only
main() function in unit_tests.c.
- Fix Makefile dependencies so that "make unit-tests" will rebuild the
binary with the changes in the commit.

Also with the linking the entire rtla-in.o file, it now has rtla's
nr_cpus symbol, so the declaration in utils unit tests is made extern.

Assisted-by: Composer:composer-2-fast
Link: https://lore.kernel.org/r/20260424140244.958495-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next

Some Display Port Adaptive Sync depends on drm work.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Bringing in recent display changes.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 7.1-rc1

Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'trace-rtla-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull RTLA updates from Steven Rostedt:

- Simplify option parsing

Auto-generate getopt_long() opts

Merge tag 'trace-rtla-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull RTLA updates from Steven Rostedt:

- Simplify option parsing

Auto-generate getopt_long() optstring for short options from long
options array, avoiding the need to specify it manually and reducing
the surface for mistakes.

- Add unit tests

Implement unit tests (make unit-tests) using libcheck, next to
existing runtime tests (make check). Currently, three functions from
utils.c are tested.

- Add --stack-format option

In addition to stopping stack pointer decoding (with -s/--stack
option) on first unresolvable pointer, allow also skipping
unresolvable pointers and displaying everything, configurable with a
new option.

- Unify number of CPUs into one global variable

Use one global variable, nr_cpus, to store the number of CPUs instead
of retrieving it and passing it at multiple places.

- Fix behavior in various corner cases

Make RTLA behave correctly in several corner cases: memory allocation
failure, invalid value read from kernel side, thread creation
failure, malformed time value input, and read/write failure or
interruption by signal.

- Improve string handling

Simplify several places in the code that handle strings, including
parsing of action arguments. A few new helper functions and variables
are added for that purpose.

- Get rid of magic numbers

Few places handling paths use a magic number of 1024. Replace it with
MAX_PATH and ARRAY_SIZE() macro.

- Unify threshold handling

Code that handles response to latency threshold is duplicated between
tools, which has led to bugs in the past. Unify it into a new helper
as much as possible.

- Fix segfault on SIGINT during cleanup

The SIGINT handler touches dynamically allocated memory. Detach it
before freeing it during cleanup to prevent segmentation fault and
discarding of output buffers. Also, properly document SIGINT handling
while at it.

* tag 'trace-rtla-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (28 commits)
Documentation/rtla: Document SIGINT behavior
rtla: Fix segfault on multiple SIGINTs
rtla/utils: Fix loop condition in PID validation
rtla/utils: Fix resource leak in set_comm_sched_attr()
rtla/trace: Fix I/O handling in save_trace_to_file()
rtla/trace: Fix write loop in trace_event_save_hist()
rtla/timerlat: Simplify RTLA_NO_BPF environment variable check
rtla: Use str_has_prefix() for option prefix check
rtla: Enforce exact match for time unit suffixes
rtla: Use str_has_prefix() for prefix checks
rtla: Add str_has_prefix() helper function
rtla: Handle pthread_create() failure properly
rtla/timerlat: Add bounds check for softirq vector
rtla: Simplify code by caching string lengths
rtla: Replace magic number with MAX_PATH
rtla: Introduce common_threshold_handler() helper
rtla/actions: Simplify argument parsing
rtla: Use strdup() to simplify code
rtla: Exit on memory allocation failures during initialization
tools/rtla: Remove unneeded nr_cpus from for_each_monitored_cpu
...

show more ...

tools/rtla: Add unit tests for utils.c

Add unit tests for utility functions in src/utils.c using the Check
testing framework. The tests verify parse_cpu_set(), strtoi(), and
parse_prio() functions.

tools/rtla: Add unit tests for utils.c

Add unit tests for utility functions in src/utils.c using the Check
testing framework. The tests verify parse_cpu_set(), strtoi(), and
parse_prio() functions.

Unit tests are built conditionally when libcheck is available.
Run tests with 'make unit-test'.

The test framework uses the Check library which provides process
isolation for each test, preventing failures in one test from
affecting others.

Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/r/20260119105857.797498-3-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>

show more ...