Merge tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- Move libvfio selftest artifacts in preparation of more tightly
coupled integration

Merge tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- Move libvfio selftest artifacts in preparation of more tightly
coupled integration with KVM selftests (David Matlack)

- Fix comment typo in mtty driver (Chu Guangqing)

- Support for new hardware revision in the hisi_acc vfio-pci variant
driver where the migration registers can now be accessed via the PF.
When enabled for this support, the full BAR can be exposed to the
user (Longfang Liu)

- Fix vfio cdev support for VF token passing, using the correct size
for the kernel structure, thereby actually allowing userspace to
provide a non-zero UUID token. Also set the match token callback for
the hisi_acc, fixing VF token support for this this vfio-pci variant
driver (Raghavendra Rao Ananta)

- Introduce internal callbacks on vfio devices to simplify and
consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO
data, removing various ioctl intercepts with a more structured
solution (Jason Gunthorpe)

- Introduce dma-buf support for vfio-pci devices, allowing MMIO regions
to be exposed through dma-buf objects with lifecycle managed through
move operations. This enables low-level interactions such as a
vfio-pci based SPDK drivers interacting directly with dma-buf capable
RDMA devices to enable peer-to-peer operations. IOMMUFD is also now
able to build upon this support to fill a long standing feature gap
versus the legacy vfio type1 IOMMU backend with an implementation of
P2P support for VM use cases that better manages the lifecycle of the
P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy)

- Convert eventfd triggering for error and request signals to use RCU
mechanisms in order to avoid a 3-way lockdep reported deadlock issue
(Alex Williamson)

- Fix a 32-bit overflow introduced via dma-buf support manifesting with
large DMA buffers (Alex Mastro)

- Convert nvgrace-gpu vfio-pci variant driver to insert mappings on
fault rather than at mmap time. This conversion serves both to make
use of huge PFNMAPs but also to both avoid corrected RAS events
during reset by now being subject to vfio-pci-core's use of
unmap_mapping_range(), and to enable a device readiness test after
reset (Ankit Agrawal)

- Refactoring of vfio selftests to support multi-device tests and split
code to provide better separation between IOMMU and device objects.
This work also enables a new test suite addition to measure parallel
device initialization latency (David Matlack)

* tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits)
vfio: selftests: Add vfio_pci_device_init_perf_test
vfio: selftests: Eliminate INVALID_IOVA
vfio: selftests: Split libvfio.h into separate header files
vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c
vfio: selftests: Rename vfio_util.h to libvfio.h
vfio: selftests: Stop passing device for IOMMU operations
vfio: selftests: Move IOVA allocator into iova_allocator.c
vfio: selftests: Move IOMMU library code into iommu.c
vfio: selftests: Rename struct vfio_dma_region to dma_region
vfio: selftests: Upgrade driver logging to dev_err()
vfio: selftests: Prefix logs with device BDF where relevant
vfio: selftests: Eliminate overly chatty logging
vfio: selftests: Support multiple devices in the same container/iommufd
vfio: selftests: Introduce struct iommu
vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode
vfio: selftests: Allow passing multiple BDFs on the command line
vfio: selftests: Split run.sh into separate scripts
vfio: selftests: Move run.sh into scripts directory
vfio/nvgrace-gpu: wait for the GPU mem to be ready
vfio/nvgrace-gpu: Inform devmem unmapped after reset
...

show more ...

vfio: selftests: Split run.sh into separate scripts

Split run.sh into separate scripts (setup.sh, run.sh, cleanup.sh) to
enable multi-device testing, and prepare for VFIO selftests
automatically det

vfio: selftests: Split run.sh into separate scripts

Split run.sh into separate scripts (setup.sh, run.sh, cleanup.sh) to
enable multi-device testing, and prepare for VFIO selftests
automatically detecting which devices to use for testing by storing
device metadata on the filesystem.

- setup.sh takes one or more BDFs as arguments and sets up each device.
Metadata about each device is stored on the filesystem in the
directory:

${TMPDIR:-/tmp}/vfio-selftests-devices

Within this directory is a directory for each BDF, and then files in
those directories that cleanup.sh uses to cleanup the device.

- run.sh runs a selftest by passing it the BDFs of all set up devices.

- cleanup.sh takes zero or more BDFs as arguments and cleans up each
device. If no BDFs are provided, it cleans up all devices.

This split enables multi-device testing by allowing multiple BDFs to be
set up and passed into tests:

For example:

$ tools/testing/selftests/vfio/scripts/setup.sh <BDF1> <BDF2>
$ tools/testing/selftests/vfio/scripts/setup.sh <BDF3>
$ tools/testing/selftests/vfio/scripts/run.sh echo
<BDF1> <BDF2> <BDF3>
$ tools/testing/selftests/vfio/scripts/cleanup.sh

In the future, VFIO selftests can automatically detect set up devices by
inspecting ${TMPDIR:-/tmp}/vfio-selftests-devices. This will avoid the
need for the run.sh script.

Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-3-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>

show more ...

vfio: selftests: Move run.sh into scripts directory

Move run.sh in a new sub-directory scripts/. This directory will be used
to house various helper scripts to be used by humans and automation for
r

vfio: selftests: Move run.sh into scripts directory

Move run.sh in a new sub-directory scripts/. This directory will be used
to house various helper scripts to be used by humans and automation for
running VFIO selftests.

Opportunistically also switch run.sh from TEST_PROGS_EXTENDED to
TEST_FILES. The former is for actual test executables that are just not
run by default. TEST_FILES is a better fit for helper scripts.

No functional change intended.

Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-2-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>

show more ...