Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block fixes from Jens Axboe:

- Series for zloop, fixing a variety of issues

- t10-pi code cleanup

Merge tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block fixes from Jens Axboe:

- Series for zloop, fixing a variety of issues

- t10-pi code cleanup

- Fix for a merge window regression with the bio memory allocation mask

- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown

- ublk self tests additions

- Zoned device pgmap fixes

- Various little cleanups and fixes

* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...

show more ...

selftests: ublk: add ublk auto integrity test

The end-to-end integrity ublk selftest test_integrity_02 requires a
relatively recent fio version to support I/O with integrity buffers. Add
a version t

selftests: ublk: add ublk auto integrity test

The end-to-end integrity ublk selftest test_integrity_02 requires a
relatively recent fio version to support I/O with integrity buffers. Add
a version test_integrity_03 that uses the block layer's auto integrity
path instead. The auto integrity code doesn't check the application tag,
and doesn't indicate the bad guard/ref tag (just returns EILSEQ). But
it's a good smoke-test of the ublk integrity code and provides coverage
of the auto integrity path as well.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

- Add shared memory zero-copy I/O support for ublk, bypassing pe

Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

- Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
copies between kernel and userspace by matching registered buffer
PFNs at I/O time. Includes selftests.

- Refactor bio integrity to support filesystem initiated integrity
operations and arbitrary buffer alignment.

- Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
unify synchronous bi_end_io callbacks.

- Fix zone write plug refcount handling and plug removal races. Add
support for serializing zone writes at QD=1 for rotational zoned
devices, yielding significant throughput improvements.

- Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
command.

- Add io_uring passthrough (uring_cmd) support to the BSG layer.

- Replace pp_buf in partition scanning with struct seq_buf.

- zloop improvements and cleanups.

- drbd genl cleanup, switching to pre_doit/post_doit.

- NVMe pull request via Keith:
- Fabrics authentication updates
- Enhanced block queue limits support
- Workqueue usage updates
- A new write zeroes device quirk
- Tagset cleanup fix for loop device

- MD pull requests via Yu Kuai:
- Fix raid5 soft lockup in retry_aligned_read()
- Fix raid10 deadlock with check operation and nowait requests
- Fix raid1 overlapping writes on writemostly disks
- Fix sysfs deadlock on array_state=clear
- Proactive RAID-5 parity building with llbitmap, with
write_zeroes_unmap optimization for initial sync
- Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
version mismatch fallback
- Fix bcache use-after-free and uninitialized closure
- Validate raid5 journal metadata payload size
- Various cleanups

- Various other fixes, improvements, and cleanups

* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
block: refactor blkdev_zone_mgmt_ioctl
MAINTAINERS: update ublk driver maintainer email
Documentation: ublk: address review comments for SHMEM_ZC docs
ublk: allow buffer registration before device is started
ublk: replace xarray with IDA for shmem buffer index allocation
ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
ublk: verify all pages in multi-page bvec fall within registered range
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
xfs: use bio_await in xfs_zone_gc_reset_sync
block: add a bio_submit_or_kill helper
block: factor out a bio_await helper
block: unify the synchronous bi_end_io callbacks
xfs: fix number of GC bvecs
selftests/ublk: add read-only buffer registration test
selftests/ublk: add filesystem fio verify test for shmem_zc
selftests/ublk: add hugetlbfs shmem_zc test for loop target
selftests/ublk: add shared memory zero-copy test
selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
...

show more ...

selftests/ublk: add read-only buffer registration test

Add --rdonly_shmem_buf option to kublk that registers shared memory
buffers with UBLK_SHMEM_BUF_READ_ONLY (read-only pinning without
FOLL_WRITE

selftests/ublk: add read-only buffer registration test

Add --rdonly_shmem_buf option to kublk that registers shared memory
buffers with UBLK_SHMEM_BUF_READ_ONLY (read-only pinning without
FOLL_WRITE) and mmaps with PROT_READ only.

Add test_shmemzc_04.sh which exercises the new flag with a null target,
hugetlbfs buffer, and write workload. Write I/O works because the
server only reads from the shared buffer — the data flows from client
to kernel to the shared pages, and the server reads them out.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

selftests/ublk: add filesystem fio verify test for shmem_zc

Add test_shmemzc_03.sh which exercises shmem_zc through the full
filesystem stack: mkfs ext4 on the ublk device, mount it, then run
fio ve

selftests/ublk: add filesystem fio verify test for shmem_zc

Add test_shmemzc_03.sh which exercises shmem_zc through the full
filesystem stack: mkfs ext4 on the ublk device, mount it, then run
fio verify on a file inside the filesystem with --mem=mmaphuge.

Extend _mkfs_mount_test() to accept an optional command that runs
between mount and umount. The function cd's into the mount directory
so the command can use relative file paths. Existing callers that
pass only the device are unaffected.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

selftests/ublk: add hugetlbfs shmem_zc test for loop target

Add test_shmem_zc_02.sh which tests the UBLK_IO_F_SHMEM_ZC zero-copy
path on the loop target using a hugetlbfs shared buffer. Both kublk a

selftests/ublk: add hugetlbfs shmem_zc test for loop target

Add test_shmem_zc_02.sh which tests the UBLK_IO_F_SHMEM_ZC zero-copy
path on the loop target using a hugetlbfs shared buffer. Both kublk and
fio mmap the same hugetlbfs file with MAP_SHARED, sharing physical
pages. The kernel's PFN matching enables zero-copy — the loop target
reads/writes directly from the shared buffer to the backing file.

Uses standard fio --mem=mmaphuge:<path> (supported since fio 1.10),
no patched fio required.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

selftests/ublk: add shared memory zero-copy test

Add test_shmem_zc_01.sh which tests UBLK_IO_F_SHMEM_ZC on the null
target using a hugetlbfs shared buffer. Both kublk (--htlb) and fio
(--mem=mmaphug

selftests/ublk: add shared memory zero-copy test

Add test_shmem_zc_01.sh which tests UBLK_IO_F_SHMEM_ZC on the null
target using a hugetlbfs shared buffer. Both kublk (--htlb) and fio
(--mem=mmaphuge:<path>) mmap the same hugetlbfs file with MAP_SHARED,
sharing physical pages. The kernel PFN match enables zero-copy I/O.

Uses standard fio --mem=mmaphuge:<path> (supported since fio 1.10),
no patched fio required.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

selftests: ublk: test that teardown after incomplete recovery completes

Before the fix, teardown of a ublk server that was attempting to recover
a device, but died when it had submitted a nonempty p

selftests: ublk: test that teardown after incomplete recovery completes

Before the fix, teardown of a ublk server that was attempting to recover
a device, but died when it had submitted a nonempty proper subset of the
fetch commands to any queue would loop forever. Add a test to verify
that, after the fix, teardown completes. This is done by:

- Adding a new argument to the fault_inject target that causes it die
after fetching a nonempty proper subset of the IOs to a queue
- Using that argument in a new test while trying to recover an
already-created device
- Attempting to delete the ublk device at the end of the test; this
hangs forever if teardown from the fault-injected ublk server never
completed.

It was manually verified that the test passes with the fix and hangs
without it.

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260405-cancel-v2-2-02d711e643c2@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-misc-next

Backmerging to get bug fixes from v6.19-rc7.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up perf-tools fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes from perf-tools.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.

Other changes are small fixes.

show more ...

Merge tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

- Support for batch request processing for ublk, improving the

Merge tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements

- Support for integrity data for ublk

- Various other ublk improvements and additions, including a ton of
selftests additions and updated

- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting

- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling

- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling

- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.

- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype

- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer

- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes

- Improve the speed for secure erase for some devices

- Various little rust updates

- Various other minor fixes, improvements, and cleanups

* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge branch 'v6.19-rc8'

Update to avoid conflicts with /urgent patches.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

selftests: ublk: improve I/O ordering test with bpftrace

Remove test_generic_01.sh since block layer may reorder I/O, making
the test prone to false positives. Apply the improvements to
test_generic

selftests: ublk: improve I/O ordering test with bpftrace

Remove test_generic_01.sh since block layer may reorder I/O, making
the test prone to false positives. Apply the improvements to
test_generic_02.sh instead, which supposes for covering ublk dispatch
io order.

Rework test_generic_02 to verify that ublk dispatch doesn't reorder I/O
by comparing request start order with completion order using bpftrace.

The bpftrace script now:
- Tracks each request's start sequence number in a map keyed by sector
- On completion, verifies the request's start order matches expected
completion order
- Reports any out-of-order completions detected

The test script:
- Wait bpftrace BEGIN code block is run
- Pins fio to CPU 0 for deterministic behavior
- Uses block_io_start and block_rq_complete tracepoints
- Checks bpftrace output for reordering errors

Reported-and-tested-by: Alexander Atanasov <alex@zazolabs.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

selftests: ublk: reorganize tests into integrity and recover groups

Move integrity-focused tests into new 'integrity' group:
- test_null_04.sh -> test_integrity_01.sh
- test_loop_08.sh -> test_integ

selftests: ublk: reorganize tests into integrity and recover groups

Move integrity-focused tests into new 'integrity' group:
- test_null_04.sh -> test_integrity_01.sh
- test_loop_08.sh -> test_integrity_02.sh

Move recovery-focused tests into new 'recover' group:
- test_generic_04.sh -> test_recover_01.sh
- test_generic_05.sh -> test_recover_02.sh
- test_generic_11.sh -> test_recover_03.sh
- test_generic_14.sh -> test_recover_04.sh

Update Makefile to reflect the reorganization.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

selftests: ublk: add _ublk_sleep helper for parallel execution

Add _ublk_sleep() helper function that uses different sleep times
depending on whether tests run in parallel or sequential mode.

Usage

selftests: ublk: add _ublk_sleep helper for parallel execution

Add _ublk_sleep() helper function that uses different sleep times
depending on whether tests run in parallel or sequential mode.

Usage: _ublk_sleep <normal_secs> <parallel_secs>

Export JOBS variable from Makefile so test scripts can detect parallel
execution, and use _ublk_sleep in test_part_02.sh to handle the
partition scan delay (1s normal, 5s parallel).

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...