| #
67f8bc84 |
| 01-Sep-2026 |
Maxime Ripard <mripard@kernel.org> |
Merge drm/drm-fixes into drm-misc-fixes
Let's start the 7.3 drm-misc-fixes cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Revision tags: v7.3-rc1 |
|
| #
3b4128b9 |
| 19-Aug-2026 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and timekeeping core updates from Thomas Gleixner:
- Fix a subtly inconsistency in the timeke
Merge tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and timekeeping core updates from Thomas Gleixner:
- Fix a subtly inconsistency in the timekeeping code, which fails to account for the monotonicity adjustment in ntp_error.
For small changes of the clocksource multiplicator (+/-1) which are typically used by the NTP PLL this is hard to observe. But for larger adjustments, e.g. caused by a direct frequency setting through adjtimex() the one-time uncompensated offset is significant.
Cure this by adjusting ntp_error with the resulting offset so that the discrepancy is smoothed away over time
- Make tick length calculations correct in NTP.
The timekeeping core takes the quantisation of the clocksource into account when calculating the tick length to compensate for the deviation of the nominal NTP_INTERVAL_LENGTH.
While timekeeping gets this right, NTP is not aware of that, which means it operates on the nominal value and not on the actual value which is determined by the clock source frequency. The rounding of a coarse clocksource like the ACPI PM timer results in a +127 PPM deviation.
Cure this by exposing the deviation to the NTP code so that it can operate on the same data as the timekeeping core. This is purely kernel internal. User space still sees the nominal tick lenght via adjtimex().
- The accuracy of the NTP adjustments is fairly approximate as the code assumes that the invocations are precisely in NTP interval frequency ticks and the final adjustment can over and under-run.
Cure this by adjusting ntp_error by the intended skew on each tick to achieve the desired rate.
- Handle the two competing skews of time offset and time adjustment correctly by calculating the conflict portion between the skews and adjusting both accordingly.
- A set of updates and improvements for the selftests
- The usual small fixes and improvements all over the place
* tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) selftests: timers: nsleep-lat: Check all calls to clock_nanosleep() and clock_gettime() selftests: timers: nsleep-lat: Reuse kselftest error numbers selftests: timers: nsleep-lat: Explicitly list the tested clocks selftests: timers: nsleep-lat: Use NSEC_PER_MSEC define for unreasonable latency selftests: timers: nanosleep: Report each test separately selftests: timers: nanosleep: Explicitly handle timer_delete() failure selftests: timers: nanosleep: Move all single clock tests out of the loop in main() selftests: timers: nanosleep: Reuse kselftest error numbers selftests: timers: nanosleep: Explicitly list the tested clocks selftests: timers: nanosleep: Drop output alignment selftests: timers: Use clock_name() and constants from clock-helpers.h selftests: Add clock-helpers.h timer_list: Use ktime_t over nanoseconds timer_list: Use standard 'long long' format placeholders hrtimer: Add a lockdep assertion to hrtimer_update_base() timekeeping: Use u32 for clock_was_set_seq timekeeping: Rename clockid_aux_valid() to clockid_is_aux_clock() hrtimer: Account nr_retries on recovered interrupt retries timers/itimer: Zero-init old itimerval before copy to userspace nohz: Replace dead select with choice default ...
show more ...
|
|
Revision tags: v7.2, v7.2-rc7, v7.2-rc6, v7.2-rc5, v7.2-rc4, v7.2-rc3, v7.2-rc2, v7.2-rc1, v7.1 |
|
| #
f44ce7fd |
| 10-Jun-2026 |
Wake Liu <wakel@google.com> |
selftests: timers: Partially revert "Remove local NSEC_PER_SEC and USEC_PER_SEC defines"
This partially reverts commit 80fa614e2fbc ("selftests: timers: Remove local NSEC_PER_SEC and USEC_PER_SEC de
selftests: timers: Partially revert "Remove local NSEC_PER_SEC and USEC_PER_SEC defines"
This partially reverts commit 80fa614e2fbc ("selftests: timers: Remove local NSEC_PER_SEC and USEC_PER_SEC defines").
The original commit removed local definitions of NSEC_PER_SEC and USEC_PER_SEC in favor of including <include/vdso/time64.h>. However, NSEC_PER_SEC in vdso/time64.h is defined as 1000000000L, which is 32-bit on 32-bit architectures. This causes integer overflow warnings in several timer tests when doing arithmetic like NSEC_PER_SEC * 10 on 32-bit systems.
To fix this, restore the local definitions of NSEC_PER_SEC and USEC_PER_SEC in the test files, but use "LL" suffix consistently (1000000000LL and 1000000LL) to ensure 64-bit arithmetic and avoid overflows.
We keep the cleanup from the original commit that renamed plural definitions (NSECS_PER_SEC/USECS_PER_SEC) to singular ones in posix_timers.c, but we now define them locally there as well. This also removes the dependency of the selftests on the internal kernel header <include/vdso/time64.h>.
Signed-off-by: Wake Liu <wakel@google.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Acked-by: John Stultz <jstultz@google.com> Link: https://patch.msgid.link/20260610014721.718362-1-wakel@google.com
show more ...
|
|
Revision tags: v7.1-rc7, v7.1-rc6, v7.1-rc5, v7.1-rc4, v7.1-rc3, v7.1-rc2, v7.1-rc1, v7.0, v7.0-rc7, v7.0-rc6, v7.0-rc5, v7.0-rc4, v7.0-rc3, v7.0-rc2, v7.0-rc1, v6.19, v6.19-rc8, v6.19-rc7, v6.19-rc6, v6.19-rc5, v6.19-rc4, v6.19-rc3, v6.19-rc2, v6.19-rc1, v6.18, v6.18-rc7, v6.18-rc6, v6.18-rc5, v6.18-rc4, v6.18-rc3, v6.18-rc2, v6.18-rc1, v6.17, v6.17-rc7, v6.17-rc6, v6.17-rc5, v6.17-rc4, v6.17-rc3, v6.17-rc2, v6.17-rc1, v6.16, v6.16-rc7, v6.16-rc6, v6.16-rc5, v6.16-rc4, v6.16-rc3, v6.16-rc2, v6.16-rc1, v6.15, v6.15-rc7, v6.15-rc6, v6.15-rc5, v6.15-rc4, v6.15-rc3, v6.15-rc2, v6.15-rc1, v6.14, v6.14-rc7, v6.14-rc6, v6.14-rc5, v6.14-rc4, v6.14-rc3, v6.14-rc2 |
|
| #
c771600c |
| 05-Feb-2025 |
Tvrtko Ursulin <tursulin@ursulin.net> |
Merge drm/drm-next into drm-intel-gt-next
We need 4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope") in order to land a i915 PMU simplification and a fix. That landed in 6.12 and
Merge drm/drm-next into drm-intel-gt-next
We need 4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope") in order to land a i915 PMU simplification and a fix. That landed in 6.12 and we are stuck at 6.9 so lets bump things forward.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
show more ...
|
|
Revision tags: v6.14-rc1, v6.13, v6.13-rc7, v6.13-rc6, v6.13-rc5, v6.13-rc4 |
|
| #
60675d4c |
| 20-Dec-2024 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into x86/mm, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| #
25768de5 |
| 21-Jan-2025 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.14 merge window.
|
| #
6d4a0f4e |
| 17-Dec-2024 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.13-rc3' into next
Sync up with the mainline.
|
| #
c5fb51b7 |
| 03-Jan-2025 |
Rob Clark <robdclark@chromium.org> |
Merge remote-tracking branch 'pm/opp/linux-next' into HEAD
Merge pm/opp tree to get dev_pm_opp_get_bw()
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Revision tags: v6.13-rc3 |
|
| #
e7f0a3a6 |
| 11-Dec-2024 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catching up with 6.13-rc2.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Revision tags: v6.13-rc2 |
|
| #
8f109f28 |
| 02-Dec-2024 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-xe-next
A backmerge to get the PMT preparation work for merging the BMG PMT support.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
| #
3aba2eba |
| 02-Dec-2024 |
Maxime Ripard <mripard@kernel.org> |
Merge drm/drm-next into drm-misc-next
Kickstart 6.14 cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
| #
bcfd5f64 |
| 02-Dec-2024 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v6.13-rc1' into perf/core, to refresh the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| #
c34e9ab9 |
| 05-Dec-2024 |
Takashi Iwai <tiwai@suse.de> |
Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A few small fixes for v6.13, all system specific - the biggest t
Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A few small fixes for v6.13, all system specific - the biggest thing is the fix for jack handling over suspend on some Intel laptops.
show more ...
|
|
Revision tags: v6.13-rc1 |
|
| #
cf87766d |
| 26-Nov-2024 |
Christian Brauner <brauner@kernel.org> |
Merge branch 'ovl.fixes'
Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by the overlayfs changes merged for v6.13.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
| #
856385e0 |
| 20-Nov-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan: "timer test: - remove duplicate defines
Merge tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan: "timer test: - remove duplicate defines - fixes to improve error reporting
rtc test: - check rtc alarm status in alarm test
resctrl test: - add array overrun checks during iMC config parsing code and when reading strings - fixes and reorganizing code"
* tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits) selftests/resctrl: Replace magic constants used as array size selftests/resctrl: Keep results from first test run selftests/resctrl: Do not compare performance counters and resctrl at low bandwidth selftests/resctrl: Use cache size to determine "fill_buf" buffer size selftests/resctrl: Ensure measurements skip initialization of default benchmark selftests/resctrl: Make benchmark parameter passing robust selftests/resctrl: Remove unused measurement code selftests/resctrl: Only support measured read operation selftests/resctrl: Remove "once" parameter required to be false selftests/resctrl: Make wraparound handling obvious selftests/resctrl: Protect against array overflow when reading strings selftests/resctrl: Protect against array overrun during iMC config parsing selftests/resctrl: Fix memory overflow due to unhandled wraparound selftests/resctrl: Print accurate buffer size as part of MBM results selftests/resctrl: Make functions only used in same file static selftests: Add a test mangling with uc_sigmask selftests: Rename sigaltstack to generic signal selftest: rtc: Add to check rtc alarm status for alarm related test selftests:timers: remove local CLOCKID defines selftests: timers: Remove unneeded semicolon ...
show more ...
|
|
Revision tags: v6.12, v6.12-rc7, v6.12-rc6, v6.12-rc5, v6.12-rc4, v6.12-rc3, v6.12-rc2, v6.12-rc1 |
|
| #
80fa614e |
| 24-Sep-2024 |
Shuah Khan <skhan@linuxfoundation.org> |
selftests: timers: Remove local NSEC_PER_SEC and USEC_PER_SEC defines
Remove local NSEC_PER_SEC and USEC_PER_SEC defines. Pick them up from include/vdso/time64.h. This requires -I $(top_srcdir) to t
selftests: timers: Remove local NSEC_PER_SEC and USEC_PER_SEC defines
Remove local NSEC_PER_SEC and USEC_PER_SEC defines. Pick them up from include/vdso/time64.h. This requires -I $(top_srcdir) to the timers Makefile to include the include/vdso/time64.h.
posix_timers test names the defines NSECS_PER_SEC and USECS_PER_SEC. Change posix_timers test references to the defines to match the defines in the header file.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: John Stultz <jstultz@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3, v6.11-rc2, v6.11-rc1, v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2, v6.10-rc1, v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1, v6.8, v6.8-rc7, v6.8-rc6, v6.8-rc5, v6.8-rc4, v6.8-rc3, v6.8-rc2, v6.8-rc1, v6.7, v6.7-rc8, v6.7-rc7, v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5, v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1 |
|
| #
4b419325 |
| 15-Dec-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.11 merge window.
|
|
Revision tags: v5.10 |
|
| #
3c09ec59 |
| 09-Dec-2020 |
Catalin Marinas <catalin.marinas@arm.com> |
Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-nex
Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core
* for-next/kvm-build-fix: : Fix KVM build issues with 64K pages KVM: arm64: Fix build error in user_mem_abort()
* for-next/va-refactor: : VA layout changes arm64: mm: don't assume struct page is always 64 bytes Documentation/arm64: fix RST layout of memory.rst arm64: mm: tidy up top of kernel VA space arm64: mm: make vmemmap region a projection of the linear region arm64: mm: extend linear region for 52-bit VA configurations
* for-next/lto: : Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y arm64: alternatives: Remove READ_ONCE() usage during patch operation arm64: cpufeatures: Add capability for LDAPR instruction arm64: alternatives: Split up alternative.h arm64: uaccess: move uao_* alternatives to asm-uaccess.h
* for-next/mem-hotplug: : Memory hotplug improvements arm64/mm/hotplug: Ensure early memory sections are all online arm64/mm/hotplug: Enable MEM_OFFLINE event handling arm64/mm/hotplug: Register boot memory hot remove notifier earlier arm64: mm: account for hotplug memory when randomizing the linear region
* for-next/cppc-ffh: : Add CPPC FFH support using arm64 AMU counters arm64: abort counter_read_on_cpu() when irqs_disabled() arm64: implement CPPC FFH support using AMUs arm64: split counter validation function arm64: wrap and generalise counter read functions
* for-next/pad-image-header: : Pad Image header to 64KB and unmap it arm64: head: tidy up the Image header definition arm64/head: avoid symbol names pointing into first 64 KB of kernel image arm64: omit [_text, _stext) from permanent kernel mapping
* for-next/zone-dma-default-32-bit: : Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4) of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS mm: Remove examples from enum zone_type comment arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges of: unittest: Add test for of_dma_get_max_cpu_address() of/address: Introduce of_dma_get_max_cpu_address() arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required arm64: Ignore any DMA offsets in the max_zone_phys() calculation
* for-next/signal-tag-bits: : Expose the FAR_EL1 tag bits in siginfo arm64: expose FAR_EL1 tag bits in siginfo signal: define the SA_EXPOSE_TAGBITS bit in sa_flags signal: define the SA_UNSUPPORTED bit in sa_flags arch: provide better documentation for the arch-specific SA_* flags signal: clear non-uapi flag bits when passing/returning sa_flags arch: move SA_* definitions to generic headers parisc: start using signal-defs.h parisc: Drop parisc special case for __sighandler_t
* for-next/cmdline-extended: : Add support for CONFIG_CMDLINE_EXTENDED arm64: Extend the kernel command line from the bootloader arm64: kaslr: Refactor early init command line parsing
show more ...
|
|
Revision tags: v5.10-rc7, v5.10-rc6 |
|
| #
20c7775a |
| 26-Nov-2020 |
Peter Zijlstra <peterz@infradead.org> |
Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Li
Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Linus' tree.
show more ...
|
|
Revision tags: v5.10-rc5 |
|
| #
05909cd9 |
| 18-Nov-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.9' into next
Sync up with mainline to bring in the latest DTS files.
|
|
Revision tags: v5.10-rc4, v5.10-rc3 |
|
| #
0a986ea8 |
| 07-Nov-2020 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into perf/kprobes
Merge recent kprobes updates into perf/kprobes that came from -mm.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| #
5f8f9652 |
| 05-Nov-2020 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Catch up with v5.10-rc2 and drm-misc-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
| #
01be83ee |
| 04-Nov-2020 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'core/urgent' into core/entry
Pick up the entry fix before further modifications.
|
| #
4f6b838c |
| 12-Nov-2020 |
Marc Zyngier <maz@kernel.org> |
Merge tag 'v5.10-rc1' into kvmarm-master/next
Linux 5.10-rc1
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Revision tags: v5.10-rc2 |
|
| #
f59cddd8 |
| 28-Oct-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.10-rc1' into regulator-5.10
Linux 5.10-rc1
|