Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge drm/drm-next into drm-intel-next

Backmerge to bring Xe driver to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@k

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers,

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/perf/urgent'

Avoid conflicts, base on fixes.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support usec resolution of TCP timest

Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.

- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality

- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.

- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.

- Support sending fragmented skbs over vsock sockets.

- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().

- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.

- Add sysctl to control activation of TCP ping-pong mode.

- Add sysctl to make connection timeout in MPTCP configurable.

- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.

- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.

- Support selective FDB flushing in the VXLAN tunnel driver.

- Allow limiting learned FDB entries in bridges, prevent OOM attacks.

- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.

- Support multiple PTP timestamp event queue readers with different
filters.

- MCTP over I3C.

BPF:

- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.

- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:

https://lwn.net/Articles/938435/

- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.

This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.

- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.

- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.

- Allow source address selection with bpf_*_fib_lookup().

- Add ability to pin BPF timer to the current CPU.

- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.

- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.

- Inherit system settings for CPU security mitigations.

- Add BPF v4 CPU instruction support for arm32 and s390x.

Changes to common code:

- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.

- Process doc update with more guidance for reviewers.

Driver API:

- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.

- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.

- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.

- Rework PHY state machine to avoid races with calls to phy_stop().

- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.

- Allow antenna control on injected WiFi frames.

- Reduce the number of variants of napi_schedule().

- Simplify error handling when composing devlink health messages.

Misc:

- A lot of KCSAN data race "fixes", from Eric.

- A lot of __counted_by() annotations, from Kees.

- A lot of strncpy -> strscpy and printf format fixes.

- Replace master/slave terminology with conduit/user in DSA drivers.

- Handful of KUnit tests for netdev and WiFi core.

Removed:

- AppleTalk COPS.

- AppleTalk ipddp.

- TI AR7 CPMAC Ethernet driver.

Drivers:

- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload

- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)

- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region

- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port

- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking

- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers

- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support

- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...

show more ...

Merge branch 'selftests-tc-testing-parallel-tdc'

Pedro Tammela says:

====================
selftests/tc-testing: parallel tdc

As the number of tdc tests is growing, so is our completion wall time.

Merge branch 'selftests-tc-testing-parallel-tdc'

Pedro Tammela says:

====================
selftests/tc-testing: parallel tdc

As the number of tdc tests is growing, so is our completion wall time.
One of the ideas to improve this is to run tests in parallel, as they
are self contained.

This series allows for tests to run in parallel, in batches of 32 tests.
Not all tests can run in parallel as they might conflict with each other.
The code will still honor this requirement even when trying to run the
tests over the worker pool.

In order to make this happen we had to localize the test resources
(patches 1 and 2), where instead of having all tests sharing one single
namespace and veths devices each test now gets it's own local namespace and devices.

Even though the tests serialize over rtnl_lock in the kernel, we
measured a speedup of about 3x in a test VM.
====================

Link: https://lore.kernel.org/r/20230919135404.1778595-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

selftests/tc-testing: update test definitions for local resources

With resources localized on a per test basis, some tests definitions
either contain redundant commands, were wrong or could be simpl

selftests/tc-testing: update test definitions for local resources

With resources localized on a per test basis, some tests definitions
either contain redundant commands, were wrong or could be simplified.
Update all of them to match the new requirements.

Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.

Merge tag 'v5.6' into next

Sync up with mainline to get device tree and other changes.

Merge branch 'for-5.7/appleir' into for-linus

- small code cleanups in hid-appleir from Lucas Tanure

Merge branch 'x86/kdump' into locking/kcsan, to resolve conflicts

Conflicts:
arch/x86/purgatory/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently lan

Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.

Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com

show more ...

Merge tag 'v5.6-rc3' into sched/core, to pick up fixes and dependent patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge v5.6-rc2 into drm-misc-next

Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.

Signed-off-by: Maxime Ripard <maxime@cerno.tec

Merge v5.6-rc2 into drm-misc-next

Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merging to get the mac80211 updates that have since propagated
into net-next.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge v5.6-rc1 into drm-misc-fixes

We're based on v5.6, need v5.6-rc1 at least. :)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge branch 'linus' into perf/urgent, to synchronize with upstream

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Add WireGuard

2) Add HE and TWT support to ath11k driver, from John Crispin.

3

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Add WireGuard

2) Add HE and TWT support to ath11k driver, from John Crispin.

3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

4) Add variable window congestion control to TIPC, from Jon Maloy.

5) Add BCM84881 PHY driver, from Russell King.

6) Start adding netlink support for ethtool operations, from Michal
Kubecek.

7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.

8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.

9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...

show more ...

Merge branch 'ETS-qdisc'

Petr Machata says:

====================
Add a new Qdisc, ETS

The IEEE standard 802.1Qaz (and 802.1Q-2014) specifies four principal
transmission selection algorithms: stric

Merge branch 'ETS-qdisc'

Petr Machata says:

====================
Add a new Qdisc, ETS

The IEEE standard 802.1Qaz (and 802.1Q-2014) specifies four principal
transmission selection algorithms: strict priority, credit-based shaper,
ETS (bandwidth sharing), and vendor-specific. All these have their
corresponding knobs in DCB. But DCB does not have interfaces to configure
RED and ECN, unlike Qdiscs.

In the Qdisc land, strict priority is implemented by PRIO. Credit-based
transmission selection algorithm can then be modeled by having e.g. TBF or
CBS Qdisc below some of the PRIO bands. ETS would then be modeled by
placing a DRR Qdisc under the last PRIO band.

The problem with this approach is that DRR on its own, as well as the
combination of PRIO and DRR, are tricky to configure and tricky to offload
to 802.1Qaz-compliant hardware. This is due to several reasons:

- As any classful Qdisc, DRR supports adding classifiers to decide in which
class to enqueue packets. Unlike PRIO, there's however no fallback in the
form of priomap. A way to achieve classification based on packet priority
is e.g. like this:

# tc filter add dev swp1 root handle 1: \
basic match 'meta(priority eq 0)' flowid 1:10

Expressing the priomap in this manner however forces drivers to deep dive
into the classifier block to parse the individual rules.

A possible solution would be to extend the classes with a "defmap" a la
split / defmap mechanism of CBQ, and introduce this as a last resort
classification. However, unlike priomap, this doesn't have the guarantee
of covering all priorities. Traffic whose priority is not covered is
dropped by DRR as unclassified. But ASICs tend to implement dropping in
the ACL block, not in scheduling pipelines. The need to treat these
configurations correctly (if only to decide to not offload at all)
complicates a driver.

It's not clear how to retrofit priomap with all its benefits to DRR
without changing it beyond recognition.

- The interplay between PRIO and DRR is also causing problems. 802.1Qaz has
all ETS TCs as a last resort. Switch ASICs that support ETS at all are
likely to handle ETS traffic this way as well. However, the Linux model
is more generic, allowing the DRR block in any band. Drivers would need
to be careful to handle this case correctly, otherwise the offloaded
model might not match the slow-path one.

In a similar vein, PRIO and DRR need to agree on the list of priorities
assigned to DRR. This is doubly problematic--the user needs to take care
to keep the two in sync, and the driver needs to watch for any holes in
DRR coverage and treat the traffic correctly, as discussed above.

Note that at the time that DRR Qdisc is added, it has no classes, and
thus any priorities assigned to that PRIO band are not covered. Thus this
case is surprisingly rather common, and needs to be handled gracefully by
the driver.

- Similarly due to DRR flexibility, when a Qdisc (such as RED) is attached
below it, it is not immediately clear which TC the class represents. This
is unlike PRIO with its straightforward classid scheme. When DRR is
combined with PRIO, the relationship between classes and TCs gets even
more murky.

This is a problem for users as well: the TC mapping is rather important
for (devlink) shared buffer configuration and (ethtool) counters.

So instead, this patch set introduces a new Qdisc, which is based on
802.1Qaz wording. It is PRIO-like in how it is configured, meaning one
needs to specify how many bands there are, how many are strict and how many
are ETS, quanta for the latter, and priomap.

The new Qdisc operates like the PRIO / DRR combo would when configured as
per the standard. The strict classes, if any, are tried for traffic first.
When there's no traffic in any of the strict queues, the ETS ones (if any)
are treated in the same way as in DRR.

The chosen interface makes the overall system both reasonably easy to
configure, and reasonably easy to offload. The extra code to support ETS in
mlxsw (which already supports PRIO) is about 150 lines, of which perhaps 20
lines is bona fide new business logic.

Credit-based shaping transmission selection algorithm can be configured by
adding a CBS Qdisc under one of the strict bands (e.g. TBF can be used to a
similar effect as well). As a non-work-conserving Qdisc, CBS can't be
hooked under the ETS bands. This is detected and handled identically to DRR
Qdisc at runtime. Note that offloading CBS is not subject of this patchset.

The patchset proceeds in four stages:

- Patches #1-#3 are cleanups.
- Patches #4 and #5 contain the new Qdisc.
- Patches #6 and #7 update mlxsw to offload the new Qdisc.
- Patches #8-#10 add selftests for ETS.

Examples:

- Add a Qdisc with 6 bands, 3 strict and 3 ETS with 45%-30%-25% weights:

# tc qdisc add dev swp1 root handle 1: \
ets strict 3 quanta 4500 3000 2500 priomap 0 1 1 1 2 3 4 5
# tc qdisc sh dev swp1
qdisc ets 1: root refcnt 2 bands 6 strict 3 quanta 4500 3000 2500 priomap 0 1 1 1 2 3 4 5 5 5 5 5 5 5 5 5

- Tweak quantum of one of the classes of the previous Qdisc:

# tc class ch dev swp1 classid 1:4 ets quantum 1000
# tc qdisc sh dev swp1
qdisc ets 1: root refcnt 2 bands 6 strict 3 quanta 1000 3000 2500 priomap 0 1 1 1 2 3 4 5 5 5 5 5 5 5 5 5
# tc class ch dev swp1 classid 1:3 ets quantum 1000
Error: Strict bands do not have a configurable quantum.

- Purely strict Qdisc with 1:1 mapping between priorities and TCs:

# tc qdisc add dev swp1 root handle 1: \
ets strict 8 priomap 7 6 5 4 3 2 1 0
# tc qdisc sh dev swp1
qdisc ets 1: root refcnt 2 bands 8 strict 8 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7

- Use "bands" to specify number of bands explicitly. Underspecified bands
are implicitly ETS and their quantum is taken from MTU. The following
thus gives each band the same weight:

# tc qdisc add dev swp1 root handle 1: \
ets bands 8 priomap 7 6 5 4 3 2 1 0
# tc qdisc sh dev swp1
qdisc ets 1: root refcnt 2 bands 8 quanta 1514 1514 1514 1514 1514 1514 1514 1514 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7

v2:
- This addresses points raised by David Miller.
- Patch #4:
- sch_ets.c: Add a comment with description of the Qdisc and the
dequeuing algorithm.
- Kconfig: Add a high-level description to the help blurb.

v1:
- No changes, first upstream submission after RFC.

v3 (internal):
- This addresses review from Jiri Pirko.
- Patch #3:
- Rename to _HR_ instead of to _HIERARCHY_.
- Patch #4:
- pkt_sched.h: Keep all the TCA_ETS_ constants in one enum.
- pkt_sched.h: Rename TCA_ETS_BANDS to _NBANDS, _STRICT to _NSTRICT,
_BAND_QUANTUM to _QUANTA_BAND and _PMAP_BAND to _PRIOMAP_BAND.
- sch_ets.c: Update to reflect the above changes. Add a new policy,
ets_class_policy, which is used when parsing class changes.
Currently that policy is the same as the quanta policy, but that
might change.
- sch_ets.c: Move MTU handling from ets_quantum_parse() to the one
caller that makes use of it.
- sch_ets.c: ets_qdisc_priomap_parse(): WARN_ON_ONCE on invalid
attribute instead of returning an extack.
- Patch #6:
- __mlxsw_sp_qdisc_ets_replace(): Pass the weights argument to this
function in this patch already. Drop the weight computation.
- mlxsw_sp_qdisc_prio_replace(): Rename "quanta" to "zeroes" and
pass for the abovementioned "weights".
- mlxsw_sp_qdisc_prio_graft(): Convert to a wrapper around
__mlxsw_sp_qdisc_ets_graft(), instead of invoking the latter
directly from mlxsw_sp_setup_tc_prio().
- Update to follow the _HIERARCHY_ -> _HR_ renaming.
- Patch #7:
- __mlxsw_sp_qdisc_ets_replace(): The "weights" argument passing and
weight computation removal are now done in a previous patch.
- mlxsw_sp_setup_tc_ets(): Drop case TC_ETS_REPLACE, which is handled
earlier in the function.
- Patch #3 (iproute2):
- Add an example output to the commit message.
- tc-ets.8: Fix output of two examples.
- tc-ets.8: Describe default values of "bands", "quanta".
- q_ets.c: A number of fixes in error messages.
- q_ets.c: Comment formatting: /*padding*/ -> /* padding */
- q_ets.c: parse_nbands: Move duplicate checking to callers.
- q_ets.c: Don't accept both "quantum" and "quanta" as equivalent.

v2 (internal):
- This addresses review from Ido Schimmel and comments from Alexander
Kushnarov.
- Patch #2:
- s/coment/comment in the commit message.
- Patch #4:
- sch_ets: ets_class_is_strict(), ets_class_id(): Constify an argument
- ets_class_find(): RXTify
- Patch #3 (iproute2):
- tc-ets.8: some spelling fixes
- tc-ets.8: add another example
- tc.8: add an ETS to "CLASSFUL QDISCS" section

v1 (internal):
- This addresses RFC reviews from Ido Schimmel and Roman Mashak, bugs found
by Alexander Petrovskiy and myself, and other improvements.
- Patch #2:
- Expand the explanation with an explicit example.
- Patch #4:
- Kconfig: s/sch_drr/sch_ets/
- sch_ets: Reorder includes to be in alphabetical order
- sch_ets: ets_quantum_parse(): Rename the return-pointer argument
from pquantum to quantum, and use it directly, not going through a
local temporary.
- sch_ets: ets_qdisc_quanta_parse(): Convert syntax of function
argument "quanta" from an array to a pointer.
- sch_ets: ets_qdisc_priomap_parse(): Likewise with "priomap".
- sch_ets: ets_qdisc_quanta_parse(), ets_qdisc_priomap_parse(): Invoke
__nla_validate_nested directly instead of nl80211_validate_nested().
- sch_ets: ets_qdisc_quanta_parse(): WARN_ON_ONCE on invalid attribute
instead of returning an extack.
- sch_ets: ets_qdisc_change(): Make the last band the default one for
unmentioned priomap priorities.
- sch_ets: Fix a panic when an offloaded child in a bandwidth-sharing
band notified its ETS parent.
- sch_ets: When ungrafting, add the newly-created invisible FIFO to
the Qdisc hash
- Patch #5:
- pkt_cls.h: Note that quantum=0 signifies a strict band.
- Fix error path handling when ets_offload_dump() fails.
- Patch #6:
- __mlxsw_sp_qdisc_ets_replace(): Convert syntax of function arguments
"quanta" and "priomap" from arrays to pointers.
- Patch #7:
- __mlxsw_sp_qdisc_ets_replace(): Convert syntax of function argument
"weights" from an array to a pointer.
- Patch #9:
- mlxsw/sch_ets.sh: Add a comment explaining packet prioritization.
- Adjust the whole suite to allow testing of traffic classifiers
in addition to testing priomap.
- Patch #10:
- Add a number of new tests to test default priomap band, overlarge
number of bands, zeroes in quanta, and altogether missing quanta.
- Patch #1 (iproute2):
- State motivation for inclusion of this patch in the patcheset in the
commit message.
- Patch #3 (iproute2):
- tc-ets.8: it is now December
- tc-ets.8: explain inactivity WRT using non-WC Qdiscs under ETS band
- tc-ets.8: s/flow/band in explanation of quantum
- tc-ets.8: explain what happens with priorities not covered by priomap
- tc-ets.8: default priomap band is now the last one
- q_ets.c: ets_parse_opt(): Remove unnecessary initialization of
priomap and quanta.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: qdiscs: Add test coverage for ETS Qdisc

Add TDC coverage for the new ETS Qdisc.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-of

selftests: qdiscs: Add test coverage for ETS Qdisc

Add TDC coverage for the new ETS Qdisc.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...