Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.q

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager Page Splitting for KVM RISC-V
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest

show more ...

Merge drm/drm-next into drm-xe-next

Sync some i915/display changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next to v7.2-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.

If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

show more ...

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
dro

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
drop the unused initializer in the platform_device_id table for
sh_mtu2 (Uwe Kleine-König)

- Remove redundant dev_err()/dev_err_probe() messages when
devm_request_*_irq() fails, as the helper already logs an error
message (Pan Chuang)

- Fix a boot hang on Allwinner D1 when a forced minimum delta is used
with the sun4i timer (Felix Yan)

- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the
IRQ on failure in the NXP PIT driver (WenTao Liang)

- Fix incorrect unmapping of shared MMIO between the clocksource and
clockevent drivers. If one of them fails to initialize, the error
path unmaps the shared MMIO region, leaving the other driver with an
invalid mapping on clps711x (Guangshuo Li)

- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing
regular spinlocks with raw_spinlock_t in atomic contexts (Marek
Szyprowski)

- Use __raw_readl() and __raw_writel() instead of ioread32() and
iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam
Adilov)

- Fix a missing clk_disable_unprepare() call in the timer
initialization error path of the Armada driver (Yuho Choi)

Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.3 merge window.

Merge tag 'v7.2-rc3' into next

Sync up with mainline to pull in stable fixes to avoid merge conflicts.

Merge drm/drm-fixes into drm-misc-fixes

Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

Merge branch 'next' into for-linus

Prepare input updates for 7.2 merge window.

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2.

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2. The PR contains
a build-time dependency of one of the GPIO commits that will follow.

show more ...

Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Work on removing rtnl_lock protection

Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal

- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.

- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.

- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.

- Rehash locally generated traffic to a different nexthop on
retransmit timeout.

- Honor oif when choosing nexthop for locally generated IPv6 traffic.

- Convert TCP Auth Option to crypto library, and drop non-RFC algos.

- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.

- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).

- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).

- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).

- Support binding GENEVE tunnels to a local address.

- Speed up UDP tunnel destruction (remove one synchronize_rcu()).

- Support exponential field encoding in multicast (IGMPv3 and MLDv2).

- Support attaching PSP crypto offload to containers (veth, netkit).

- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.

The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.

The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.

- Implement GRO/GSO support for PPPoE.

- Convert sockopt callbacks in a number of protocols to iov_iter.

Cross-tree stuff:

- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.

- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.

Wireless:

- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.

- Cleanups for EMLSR spec issues (drafts differed).

- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)

- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).

- Fine Timing Measurement ranging (i.e. distance measurement) APIs.

Netfilter:

- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.

- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.

Deletions:

- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).

- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.

- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.

- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.

- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.

- Remove 5/10 MHz support from cfg80211/mac80211.

Drivers:

- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state

- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.

- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).

- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution

- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices

- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support

- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock

- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan

- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"

* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...

show more ...

Merge branch 'net-rds-convert-rds-to-getsockopt_iter'

Breno Leitao says:

====================
net: rds: convert rds to getsockopt_iter

This series continues the conversion of the remaining proto_o

Merge branch 'net-rds-convert-rds-to-getsockopt_iter'

Breno Leitao says:

====================
net: rds: convert rds to getsockopt_iter

This series continues the conversion of the remaining proto_ops getsockopt
callbacks to the new getsockopt_iter callback introduced in commit
67fab22a7adc ("net: add getsockopt_iter callback to proto_ops"), this time
for RDS.

RDS is a little more involved than the protocols converted so far, because
the RDS_INFO_* options snapshot kernel state directly into the destination
buffer: the info producers memcpy into the pages under a spinlock via
kmap_atomic() and so must not fault.

The conversion preserves that model — it obtains the same page array and
starting offset from opt->iter_out with iov_iter_extract_pages(),
preallocating the array so the iterator fills it in place, and leaves
the rds_info_iterator / rds_info_copy machinery and all producer
callbacks unchanged; kernel (ITER_KVEC) buffers remain unsupported on
the RDS_INFO path, as before.

I've vibe-coded a kselftest exercising both the simple options and the
RDS_INFO_* snapshot path, feel free to drop it in case this is not
useful.

Signed-off-by: Breno Leitao <leitao@debian.org>
====================

Link: https://patch.msgid.link/20260608-getsock_more-v3-0-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

selftests: net: rds: add getsockopt() conversion test

Add a kselftest that exercises the RDS getsockopt() paths converted to
the getsockopt_iter() / sockopt_t callback:

- RDS_RECVERR and SO_RDS_TRA

selftests: net: rds: add getsockopt() conversion test

Add a kselftest that exercises the RDS getsockopt() paths converted to
the getsockopt_iter() / sockopt_t callback:

- RDS_RECVERR and SO_RDS_TRANSPORT, which return their int value through
copy_to_iter() and report the written length in opt->optlen.

- RDS_INFO_*, which obtains the userspace buffer pages with
iov_iter_extract_pages() (including a non-zero starting page offset)
and lets the info producers copy the snapshot in under a spinlock.

Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-getsock_more-v3-1-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'selftests-rds-roce-support-follow-ups'

Allison Henderson says:

====================
selftests: rds: ROCE support follow ups

This is a follow up series to the "Add ROCE support to rds

Merge branch 'selftests-rds-roce-support-follow-ups'

Allison Henderson says:

====================
selftests: rds: ROCE support follow ups

This is a follow up series to the "Add ROCE support to rds selftests"
series. The first patch renames run.sh to rds_run.sh, which provides
a self-describing name that appears on the netdev CI dashboard.

The second patch addresses a sashiko complaint that I thought was
worth circling back for. In the patch "pin RDS sockets to their
intended transport," sockets are pinned to the specific transport they
are meant to test. By default, socket transports are implicitly
selected based on the network topology, but it is possible that they
can fail back to other transports if the underlying connection could
not be established. So the patch pins them to the intended transport
to avoid false positives.

The third patch "support RDS built as loadable modules," lifts the
CONFIG_MODULES=n requirement, and updates the check_*conf_enabled()
to allow modules set to "=m" and further load the backing modules for
any component set as such. config.sh is updated to match.

The fourth patch converts the rdma-prerequisite checks to return XFAIL
rather than SKIP, since the RDMA datapath is not run in netdev CI.

Questions, comments and feedback appreciated!
====================

Link: https://patch.msgid.link/20260602050657.26389-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: rds: Rename run.sh to rds_run.sh

This patch renames run.sh to rds_run.sh. This gives the test a
self-describing name that appears in the netdev CI dashboard.

Suggested-by: Matthieu Baert

selftests: rds: Rename run.sh to rds_run.sh

This patch renames run.sh to rds_run.sh. This gives the test a
self-describing name that appears in the netdev CI dashboard.

Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260602050657.26389-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v7.1-rc6' into next

Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required fo

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required for the next UBWC
patches.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge branch 'linus' into timers/clocksource

... to bring it up to date for new changes.

Merge drm/drm-next into drm-intel-next

Some Display Port Adaptive Sync depends on drm work.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Bringing in recent display changes.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 7.1-rc1