Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge branch 'selftests-mlxsw'

Petr Machata says:

====================
selftests: New selftests for out-of-order-operations patches in mlxsw

In the past, the mlxsw driver made the assumption that

Merge branch 'selftests-mlxsw'

Petr Machata says:

====================
selftests: New selftests for out-of-order-operations patches in mlxsw

In the past, the mlxsw driver made the assumption that the user applies
configuration in a bottom-up manner. Thus netdevices needed to be added to
the bridge before IP addresses were configured on that bridge or SVI added
on top of it, because whatever happened before a netdevice was mlxsw upper
was generally ignored by mlxsw. Recently, several patch series were pushed
to introduce the bookkeeping and replays necessary to offload the full
state, not just the immediate configuration step.

In this patchset, introduce new selftests that directly exercise the out of
order code paths in mlxsw.

- Patch #1 adds new tests into the existing selftest router_bridge.sh.
- Patches #2-#5 add new generic selftests.
- Patches #6-#8 add new mlxsw-specific selftests.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: router_bridge_1d: Add a new selftest

Add a selftest to verify that routing through a 1d bridge works when VLAN
upper of a physical port is used instead of a physical port. Also verify
tha

selftests: router_bridge_1d: Add a new selftest

Add a selftest to verify that routing through a 1d bridge works when VLAN
upper of a physical port is used instead of a physical port. Also verify
that when a port is attached to an already-configured bridge, the
configuration is applied.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...