Merge tag 'asoc-fix-v7.1-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v7.1

Another batch of fixes, plus a couple of quirks (mostly AMD ones,

Merge tag 'asoc-fix-v7.1-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v7.1

Another batch of fixes, plus a couple of quirks (mostly AMD ones, as has
been the case recently). All driver changes, including fixes for the
KUnit tests for the Cirrus drivers that could cause memory corruption.

show more ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"On top of a lot of Arm fixes, this includes a massive rename of types
and variables in too

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"On top of a lot of Arm fixes, this includes a massive rename of types
and variables in tools/testing/selftests/kvm - these were
unnecessarily different from what the kernel uses, so they're being
made consistent.

arm64:

- Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged

- Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum

- Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification

- Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied

- Fix the GICD_IIDR revision number field that could never been
written correctly by userspace

- Make kvm_vcpu_initialized() correctly use its parameter instead of
relying on the surrounding context

- Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time

- Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems

- Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...)

- Spelling fixes

Selftests:

- Rename types across all KVM selftests to more closely align with
types used in the kernel:

vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t

uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8

int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8

- Fix Loongarch compilation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: selftests: Add check_steal_time_uapi() implementation for LoongArch
KVM: arm64: Wake-up from WFI when iqrchip is in userspace
KVM: arm64: Fix initialisation order in __pkvm_init_finalise()
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
KVM: arm64: Fix kvm_vcpu_initialized() macro parameter
KVM: arm64: Fix FEAT_SPE_FnE to use PMSIDR_EL1.FnE, not PMSVer
KVM: arm64: Fix typo in feature check comments
KVM: arm64: Fix FEAT_Debugv8p9 to check DebugVer, not PMUVer
KVM: arm64: Reject non compliant SMCCC function calls in pKVM
KVM: arm64: vgic: Fix IIDR revision field extracted from wrong value
KVM: selftests: Replace "paddr" with "gpa" throughout
KVM: selftests: Replace "u64 nested_paddr" with "gpa_t l2_gpa"
KVM: selftests: Replace "u64 gpa" with "gpa_t" throughout
KVM: selftests: Replace "vaddr" with "gva" throughout
KVM: selftests: Clarify that arm64's inject_uer() takes a host PA, not a guest PA
KVM: selftests: Rename translate_to_host_paddr() => translate_hva_to_hpa()
KVM: selftests: Rename vm_vaddr_populate_bitmap() => vm_populate_gva_bitmap()
KVM: selftests: Rename vm_vaddr_unused_gap() => vm_unused_gva_gap()
KVM: selftests: Drop "vaddr_" from APIs that allocate memory for a given VM
KVM: selftests: Use u8 instead of uint8_t
...

show more ...

Merge tag 'kvm-x86-selftests_kernel_types-7.1' of https://github.com/kvm-x86/linux into HEAD

KVM selftests type renames for 7.1

Renames types across all KVM selftests to more closely align with typ

Merge tag 'kvm-x86-selftests_kernel_types-7.1' of https://github.com/kvm-x86/linux into HEAD

KVM selftests type renames for 7.1

Renames types across all KVM selftests to more closely align with types used
in the kernel:

vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t

uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8

int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8

Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.

Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.

show more ...

KVM: selftests: Use u64 instead of uint64_t

Use u64 instead of uint64_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel

KVM: selftests: Use u64 instead of uint64_t

Use u64 instead of uint64_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).

This commit was generated with the following command:

git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint64_t/u64/g'

Then by manually adjusting whitespace to make checkpatch.pl happy.

Include <linux/types.h> in include/kvm_util_types.h, iinclude/test_util.h,
and include/x86/pmu.h to pick up the tools-defined u64. Arguably, all
headers (especially kvm_util_types.h) should have already been including
stdint.h to get uint64_t from the libc headers, but the missing dependency
only rears its head once KVM uses u64 instead of uint64_t.

No functional change intended.

Signed-off-by: David Matlack <dmatlack@google.com>
[sean: rename pread_uint64() => pread_u64, expand on types.h include]
Link: https://patch.msgid.link/20260420212004.3938325-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

show more ...

KVM: selftests: Use gva_t instead of vm_vaddr_t

Replace all occurrences of vm_vaddr_t with gva_t to align with KVM code
and with the conversion helpers (e.g. addr_gva2hva()).

This commit was genera

KVM: selftests: Use gva_t instead of vm_vaddr_t

Replace all occurrences of vm_vaddr_t with gva_t to align with KVM code
and with the conversion helpers (e.g. addr_gva2hva()).

This commit was generated with the following command:

git ls-files tools/testing/selftests/kvm | xargs sed -i 's/vm_vaddr_/gva_/g'

Then by manually adjusting whitespace to make checkpatch.pl happy, and
dropping renames of functions that allocate memory within a given VM.

No functional change intended.

Signed-off-by: David Matlack <dmatlack@google.com>
[sean: drop renames of allocator APIs]
Link: https://patch.msgid.link/20260420212004.3938325-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"Loongarch:

- Add more CPUCFG mask bits

- Improve feature detection

- Add lazy lo

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"Loongarch:

- Add more CPUCFG mask bits

- Improve feature detection

- Add lazy load support for FPU and binary translation (LBT) register
state

- Fix return value for memory reads from and writes to in-kernel
devices

- Add support for detecting preemption from within a guest

- Add KVM steal time test case to tools/selftests

ARM:

- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception

- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process

- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers

- More pKVM fixes for features that are not supposed to be exposed to
guests

- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor

- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding

- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest

- Preliminary work for guest GICv5 support

- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures

- A small set of FPSIMD cleanups

- Selftest fixes addressing the incorrect alignment of page
allocation

- Other assorted low-impact fixes and spelling fixes

RISC-V:

- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()

- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM

- Transparent huge page support for hypervisor page tables

- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables

- Add RISC-V specific paging modes to KVM selftests

- Detect paging mode at runtime for selftests

s390:

- Performance improvement for vSIE (aka nested virtualization)

- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host

- Maintainership change for s390 vfio-pci

- Small quality of life improvement for protected guests

x86:

- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).

KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.

For more information, see the commit message for merge commit
bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")

- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN

- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,

- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry

- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly

- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue

- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM

- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace

- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2

- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration

- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)

- Clean up KVM's handling of marking mapped vCPU pages dirty

- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless

- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n

- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y

- Add a regression test for recent APICv update fixes

- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information

- Drop a dead function declaration

- Minor cleanups

x86 (Intel):

- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.

The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans

- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM

- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed

- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist

- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch

x86 (AMD):

- Drop a user-triggerable WARN on nested_svm_load_cr3() failure

- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP

- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model

- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig

- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0

- Treat exit_code as an unsigned 64-bit value through all of KVM

- Add support for fetching SNP certificates from userspace

- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2

- Misc fixes and cleanups

x86 selftests:

- Add a regression test for TPR<=>CR8 synchronization and IRQ masking

- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)

- Extend several nested VMX tests to also cover nested SVM

- Add a selftest for nested VMLOAD/VMSAVE

- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain

guest_memfd:

- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP

- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources

- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock

Generic:

- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...

show more ...

Merge tag 'kvm-x86-selftests-6.20' of https://github.com/kvm-x86/linux into HEAD

KVM selftests changes for 6.20

- Add a regression test for TPR<=>CR8 synchronization and IRQ masking.

- Overhaul

Merge tag 'kvm-x86-selftests-6.20' of https://github.com/kvm-x86/linux into HEAD

KVM selftests changes for 6.20

- Add a regression test for TPR<=>CR8 synchronization and IRQ masking.

- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support,
and extend x86's infrastructure to support EPT and NPT (for L2 guests).

- Extend several nested VMX tests to also cover nested SVM.

- Add a selftest for nested VMLOAD/VMSAVE.

- Rework the nested dirty log test, originally added as a regression test for
PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage
and to hopefully make the test easier to understand and maintain.

show more ...

KVM: selftests: Add support for nested NPTs

Implement nCR3 and NPT initialization functions, similar to the EPT
equivalents, and create common TDP helpers for enablement checking and
initialization.

KVM: selftests: Add support for nested NPTs

Implement nCR3 and NPT initialization functions, similar to the EPT
equivalents, and create common TDP helpers for enablement checking and
initialization. Enable NPT for nested guests by default if the TDP MMU
was initialized, similar to VMX.

Reuse the PTE masks from the main MMU in the NPT MMU, except for the C
and S bits related to confidential VMs.

Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230230150.4150236-17-seanjc@google.com
[sean: apply Yosry's fixup for ncr3_gpa]
Signed-off-by: Sean Christopherson <seanjc@google.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detecte

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.

Example use cases are "wake from suspend on approach" or to "lock
when leaving".

This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.

Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.

show more ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"Loongarch:

- Clear LLBCTL if secondary mmu mapping changes

- Add hypercall service s

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"Loongarch:

- Clear LLBCTL if secondary mmu mapping changes

- Add hypercall service support for usermode VMM

x86:

- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled

- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers

- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes

- Use str_enabled_disabled() to replace open coded strings

- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter

- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature

- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM

- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively

- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU

- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.

Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not

- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.

When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.

The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT

- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.

In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?

x86 - Intel:

- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost

- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt

- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty

- Misc cleanups

Generic:

- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions

- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw

- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined

- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not

RISC-V:

- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively

- Virtualize SBI system suspend extension for Guest/VM

- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host

Selftests:

- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly

- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended

- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports

- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel

- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled

- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters

- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...

show more ...