| f52fe6ef | 26-Apr-2025 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
selftests: net: tsn_lib: add window_size argument to isochron_do()
Make out-of-band testing (send a packet when its traffic class gate is
closed, expecting it to be delayed) more predictable by allo
selftests: net: tsn_lib: add window_size argument to isochron_do()
Make out-of-band testing (send a packet when its traffic class gate is
closed, expecting it to be delayed) more predictable by allowing the
window size to be customized by isochron_do().
From man isochron-send, the window size alters the advance time (the
delta between the transmission time of the packet, and its expected TX
time when using SO_TXTIME or tc-taprio on the sender). In absence of the
argument, isochron-send defaults to maximizing the advance time (making
it equal to the cycle length).
The default behavior is exactly what is problematic. An advance time
that is too large will make packets intended to be out-of-band still be
potentially in-band with an open gate from the schedule's previous cycle.
We need to allow that advance time to be reduced.
Perhaps a bit confusingly, isochron_do() has a shift_time argument
currently, but that does not help here. The shift time shifts both the
user space wakeup time and the expected TX time by equal amounts, it is
unable of bringing them closer to one another.
Set the window size properly for the Ocelot PSFP selftest as well.
That used to work due to a very carefully chosen SHIFT_TIME_NS.
I've re-tested that the test still works properly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
| 4ea1396a | 22-May-2022 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
selftests: ocelot: tc_flower_chains: reorder interfaces
Use the standard interface order h1, swp1, swp2, h2 that is used by the
forwarding selftest framework. The previous order was confusing even
w
selftests: ocelot: tc_flower_chains: reorder interfaces
Use the standard interface order h1, swp1, swp2, h2 that is used by the
forwarding selftest framework. The previous order was confusing even
with the ASCII drawing. That isn't needed anymore.
This also drops the fixed MAC addresses and uses STABLE_MAC_ADDRS, which
ensures the MAC addresses are unique.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
| 93196ef9 | 22-May-2022 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
selftests: ocelot: tc_flower_chains: use conventional interface names
This is a robotic rename as follows:
eth0 -> swp1
eth1 -> swp2
eth2 -> h2
eth3 -> h1
This brings the selftest more in line wit
selftests: ocelot: tc_flower_chains: use conventional interface names
This is a robotic rename as follows:
eth0 -> swp1
eth1 -> swp2
eth2 -> h2
eth3 -> h1
This brings the selftest more in line with the other forwarding
selftests, where h1 is connected to swp1, and h2 to swp2.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
| 434ef350 | 01-Oct-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
selftests: net: mscc: ocelot: add a test for egress VLAN modification
For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A wi
selftests: net: mscc: ocelot: add a test for egress VLAN modification
For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived
from VID_A_VAL plus the classified VLAN.
$eth3.200 is the generator port
$eth0 is the bridged DUT port that receives
$eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300
on egress via VCAP ES0
$eth2 is the port that receives from the DUT port $eth1
Since the egress rewriting happens outside the bridging service, VID 300
does not need to be in the bridge VLAN table of $eth1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
| 4a907f65 | 01-Oct-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
selftests: net: mscc: ocelot: rename the VLAN modification test to ingress
There will be one more VLAN modification selftest added, this time for
egress. Rename the one that exists right now to be m
selftests: net: mscc: ocelot: rename the VLAN modification test to ingress
There will be one more VLAN modification selftest added, this time for
egress. Rename the one that exists right now to be more specific.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|