Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus one new
device ID for an x86 laptop. Nothing that really stands out with
particularly big impact outside of the affected device.

show more ...

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.

Core
----

- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.

- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).

- Continue the work of annotating packet drop reasons throughout the
stack.

- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.

- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.

- Extend the ref_tracker to allow catching use-after-free bugs.

BPF
---

- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.

- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.

- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.

- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.

- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.

- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).

- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.

- Allow cgroup BPF progs to return custom errors to user space.

- Add support for AF_UNIX iterator batching.

- Allow iterator programs to use sleepable helpers.

- Support JIT of add, and, or, xor and xchg atomic ops on arm64.

- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.

- Large number of libbpf API improvements, cleanups and deprecations.

Protocols
---------

- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.

- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.

- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.

- Support inserting IPv6 IOAM information to a fraction of frames.

- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)

- Support setting socket and IPv6 options via cmsg on ping6 sockets.

- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.

- Add support for locked bridge ports (for 802.1X).

- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.

- IPv6 extension header handling in Open vSwitch.

- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.

- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY

- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)

- Multi-BSSID beacon handling in AP mode for WiFi.

- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events

- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements

- Increase the max PDU size in CAN ISOTP to 64 kB.

Driver API
----------

- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.

- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.

- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.

- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.

- Allow configuring completion queue event size.

- Refactor page_pool to enable fragmenting after allocation.

- Add allocation and page reuse statistics to page_pool.

- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.

- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering

New hardware / drivers
----------------------

- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches

- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6

- Mobile:
- iosm: Intel M.2 7360 WWAN card

Drivers
-------

- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.

- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support

- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions

- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP

- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support

- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports

- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload

- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches

- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock

- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets

- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode

- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices

- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915

- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan

- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...

show more ...

Merge branch 'netdevsim-support-for-l3-hw-stats'

Petr Machata says:

====================
netdevsim: Support for L3 HW stats

"L3 stats" is a suite of interface statistics aimed at reflecting traffi

Merge branch 'netdevsim-support-for-l3-hw-stats'

Petr Machata says:

====================
netdevsim: Support for L3 HW stats

"L3 stats" is a suite of interface statistics aimed at reflecting traffic
taking place in a HW device, on an object corresponding to some software
netdevice. Support for this stats suite has been added recently, in commit
ca0a53dcec94 ("Merge branch 'net-hw-counters-for-soft-devices'").

In this patch set:

- Patch #1 adds support for L3 stats to netdevsim.

Real devices can have various conditions for when an L3 counter is
available. To simulate this, netdevsim maintains a list of devices
suitable for HW stats collection. Only when l3_stats is enabled on both a
netdevice itself, and in netdevsim, will netdevsim contribute values to
L3 stats.

This enablement and disablement is done via debugfs:

# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex

Besides this, there is a third toggle to mark a device for future failure:

# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable

- This allows HW-independent testing of stats reporting and in-kernel APIs,
as well as a test for enablement rollback, which is difficult to do
otherwise. This netdevsim-specific selftest is added in patch #2.

- Patch #3 adds another driver-specific selftest, namely a test aimed at
checking mlxsw-induced stats monitoring events.

====================

Link: https://lore.kernel.org/r/cover.1647265833.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

selftests: mlxsw: hw_stats_l3: Add a new test

Add a test that verifies that UAPI notifications are emitted, as mlxsw
installs and deinstalls HW counters for the L3 offload xstats.

Signed-off-by: Pe

selftests: mlxsw: hw_stats_l3: Add a new test

Add a test that verifies that UAPI notifications are emitted, as mlxsw
installs and deinstalls HW counters for the L3 offload xstats.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...