Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Pull bpf updates from Alexei Starovoitov:

- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs

Merge tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Pull bpf updates from Alexei Starovoitov:

- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.

It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.

- Harden and extend ELF build ID parsing logic.

When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.

- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding

- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks

- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops

- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall

- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc

* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...

show more ...

Merge branch 'bpf/master' into for-6.12

Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterat

Merge branch 'bpf/master' into for-6.12

Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.

Signed-off-by: Tejun Heo <tj@kernel.org>

show more ...

selftests/bpf: add multi-uprobe benchmarks

Add multi-uprobe and multi-uretprobe benchmarks to bench tool.
Multi- and classic uprobes/uretprobes have different low-level
triggering code paths, so it'

selftests/bpf: add multi-uprobe benchmarks

Add multi-uprobe and multi-uretprobe benchmarks to bench tool.
Multi- and classic uprobes/uretprobes have different low-level
triggering code paths, so it's sometimes important to be able to
benchmark both flavors of uprobes/uretprobes.

Sample examples from my dev machine below. Single-threaded peformance
almost doesn't differ, but with more parallel CPUs triggering the same
uprobe/uretprobe the difference grows. This might be due to [0], but
given the code is slightly different, there could be other sources of
slowdown.

Note, all these numbers will change due to ongoing work to improve
uprobe/uretprobe scalability (e.g., [1]), but having benchmark like this
is useful for measurements and debugging nevertheless.

\#!/bin/bash
set -eufo pipefail
for p in 1 8 16 32; do
for i in uprobe-nop uretprobe-nop uprobe-multi-nop uretprobe-multi-nop; do
summary=$(sudo ./bench -w1 -d3 -p$p -a trig-$i | tail -n1)
total=$(echo "$summary" | cut -d'(' -f1 | cut -d' ' -f3-)
percpu=$(echo "$summary" | cut -d'(' -f2 | cut -d')' -f1 | cut -d'/' -f1)
printf "%-21s (%2d cpus): %s (%s/s/cpu)\n" $i $p "$total" "$percpu"
done
echo
done

uprobe-nop ( 1 cpus): 1.020 ± 0.005M/s ( 1.020M/s/cpu)
uretprobe-nop ( 1 cpus): 0.515 ± 0.009M/s ( 0.515M/s/cpu)
uprobe-multi-nop ( 1 cpus): 1.036 ± 0.004M/s ( 1.036M/s/cpu)
uretprobe-multi-nop ( 1 cpus): 0.512 ± 0.005M/s ( 0.512M/s/cpu)

uprobe-nop ( 8 cpus): 3.481 ± 0.030M/s ( 0.435M/s/cpu)
uretprobe-nop ( 8 cpus): 2.222 ± 0.008M/s ( 0.278M/s/cpu)
uprobe-multi-nop ( 8 cpus): 3.769 ± 0.094M/s ( 0.471M/s/cpu)
uretprobe-multi-nop ( 8 cpus): 2.482 ± 0.007M/s ( 0.310M/s/cpu)

uprobe-nop (16 cpus): 2.968 ± 0.011M/s ( 0.185M/s/cpu)
uretprobe-nop (16 cpus): 1.870 ± 0.002M/s ( 0.117M/s/cpu)
uprobe-multi-nop (16 cpus): 3.541 ± 0.037M/s ( 0.221M/s/cpu)
uretprobe-multi-nop (16 cpus): 2.123 ± 0.026M/s ( 0.133M/s/cpu)

uprobe-nop (32 cpus): 2.524 ± 0.026M/s ( 0.079M/s/cpu)
uretprobe-nop (32 cpus): 1.572 ± 0.003M/s ( 0.049M/s/cpu)
uprobe-multi-nop (32 cpus): 2.717 ± 0.003M/s ( 0.085M/s/cpu)
uretprobe-multi-nop (32 cpus): 1.687 ± 0.007M/s ( 0.053M/s/cpu)

[0] https://lore.kernel.org/linux-trace-kernel/20240805202803.1813090-1-andrii@kernel.org/
[1] https://lore.kernel.org/linux-trace-kernel/20240731214256.3588718-1-andrii@kernel.org/

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240806042935.3867862-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge branch 'master' into mm-stable

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Cross merge.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next into net-accept-more

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1557 commits)
net: qede: use extack in qe

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next into net-accept-more

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1557 commits)
net: qede: use extack in qede_parse_actions()
net: qede: propagate extack through qede_flow_spec_validate()
net: qede: use faked extack in qede_flow_spec_to_rule()
net: qede: use extack in qede_parse_flow_attr()
net: qede: add extack in qede_add_tc_flower_fltr()
net: qede: use extack in qede_flow_parse_udp_v4()
net: qede: use extack in qede_flow_parse_udp_v6()
net: qede: use extack in qede_flow_parse_tcp_v4()
net: qede: use extack in qede_flow_parse_tcp_v6()
net: qede: use extack in qede_flow_parse_v4_common()
net: qede: use extack in qede_flow_parse_v6_common()
net: qede: use extack in qede_set_v4_tuple_to_profile()
net: qede: use extack in qede_set_v6_tuple_to_profile()
net: qede: use extack in qede_flow_parse_ports()
net: usb: smsc95xx: stop lying about skb->truesize
net: dsa: microchip: Fix spellig mistake "configur" -> "configure"
af_unix: Add dead flag to struct scm_fp_list.
net: ethernet: adi: adin1110: Replace linux/gpio.h by proper one
octeontx2-pf: Reuse Transmit queue/Send queue index of HTB class
gve: Use ethtool_sprintf/puts() to fill stats strings
...

show more ...

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Complete rework of garbage collectio

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Complete rework of garbage collection of AF_UNIX sockets.

AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.

- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).

- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.

- Continue work of converting from rtnl lock to RCU protection.

Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.

- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.

- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.

- Support peek with an offset on TCP sockets.

- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.

- Add intra-node communication shortcut to improve SMC performance.

- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.

- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

- Add reset reasons for tracing what caused a TCP reset to be sent.

- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.

Things we sprinkled into general kernel code:

- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

This required touch-ups and renaming of a few existing users.

- Add Endian-dependent __counted_by_{le,be} annotations.

- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.

Netfilter:

- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.

BPF:

- Add eBPF JIT for ARCv2 CPUs.

- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.

- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.

- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.

- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.

- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.

- Harden the BPF verifier's and/or/xor value tracking.

- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.

- Support bpf_tail_call_static() helper for BPF programs with GCC 13.

- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.

Driver API:

- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.

- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.

- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.

- Common (ethtool) statistics for hardware timestamping.

Tests and tooling:

- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.

- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.

- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.

- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".

- Refactor BPF selftests to use common network helpers.

- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.

- Teach Python YAML Netlink to decode attribute policies.

- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.

- Add hyperlinks between definitions in generated Netlink docs.

Drivers:

- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action

- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect

- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching

- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup

- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger

- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support

- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-04-29

We've added 147 non-merge commit

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-04-29

We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).

The main changes are:

1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.

2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.

3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.

4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.

5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.

6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.

7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.

8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.

9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.

10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.

11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.

12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.

13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.

14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.

15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.

16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.

17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.

18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.

19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.

20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================

Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...