Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

spi: sun6i: fix RX data corruption in DMA mode

Merge series from Tobias Schramm <t.schramm@manjaro.org>:

This set of patches fixes two bugs in the sun6i SPI driver that result in
corruption of rece

spi: sun6i: fix RX data corruption in DMA mode

Merge series from Tobias Schramm <t.schramm@manjaro.org>:

This set of patches fixes two bugs in the sun6i SPI driver that result in
corruption of received data in DMA RX mode.

The first bug seems to be related to an incompatibility of the SPI RX FIFO
with wider than single byte read accesses during SPI transfers. I'm not
sure if this bug affects all types of SPI controllers found in Allwinner
SoCs supported by this driver. However reducing the access width should
always be safe. I've tested this change on a V3s SoC. Further testing to
narrow down the set of affected SoCs in the future would be welcome.

The second bug is a race between SPI RX DMA and FIFO drain logic for
interrupt-based SPI operation. This bug affects all SPI controllers
supported by this driver. Once again this change has been tested on the
Allwinner V3s SoC.

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around ine

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/

Adjacent changes:

drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")

drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")

drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")

net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

BackMerge tag 'v6.5-rc7' into drm-next

Linux 6.5-rc7

This is needed for the CI stuff and the msm pull has fixes in it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next

We need the serial-core fixes in here as well.

Signed-off-by: Greg Kr

Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next

We need the serial-core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
"Extraordinary embargoed times call for extraordinary measures. Tha

Merge tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
"Extraordinary embargoed times call for extraordinary measures. That's
why this week's x86/urgent branch is larger than usual, containing all
the known fallout fixes after the SRSO mitigation got merged.

I know, it is a bit late in the game but everyone who has reported a
bug stemming from the SRSO pile, has tested that branch and has
confirmed that it fixes their bug.

Also, I've run it on every possible hardware I have and it is looking
good. It is running on this very machine while I'm typing, for 2 days
now without an issue. Famous last words...

- Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return
sequence as latter clobbers flags which interferes with fastop
emulation in KVM, leading to guests freezing during boot

- A fix for the DIV(0) quotient data leak on Zen1 to clear the
divider buffers at the right time

- Disable the SRSO mitigation on unaffected configurations as it got
enabled there unnecessarily

- Change .text section name to fix CONFIG_LTO_CLANG builds

- Improve the optprobe indirect jmp check so that certain
configurations can still be able to use optprobes at all

- A serious and good scrubbing of the untraining routines by PeterZ:
- Add proper speculation stopping traps so that objtool is happy
- Adjust objtool to handle the new thunks
- Make the thunk pointer assignable to the different untraining
sequences at runtime, thus avoiding the alternative at the
return thunk. It simplifies the code a bit too.
- Add a entry_untrain_ret() main entry point which selects the
respective untraining sequence
- Rename things so that they're more clear
- Fix stack validation with FRAME_POINTER=y builds

- Fix static call patching to handle when a JMP to the return thunk
is the last insn on the very last module memory page

- Add more documentation about what each untraining routine does and
why"

* tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Correct the mitigation status when SMT is disabled
x86/static_call: Fix __static_call_fixup()
objtool/x86: Fixup frame-pointer vs rethunk
x86/srso: Explain the untraining sequences a bit more
x86/cpu/kvm: Provide UNTRAIN_RET_VM
x86/cpu: Cleanup the untrain mess
x86/cpu: Rename srso_(.*)_alias to srso_alias_\1
x86/cpu: Rename original retbleed methods
x86/cpu: Clean up SRSO return thunk mess
x86/alternative: Make custom return thunk unconditional
objtool/x86: Fix SRSO mess
x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()
x86/cpu: Fix __x86_return_thunk symbol type
x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT
x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG
x86/srso: Disable the mitigation on unaffected configurations
x86/CPU/AMD: Fix the DIV(0) initial fix attempt
x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()

show more ...

x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT

The kprobes optimization check can_optimize() calls
insn_is_indirect_jump() to detect indirect jump instructions

x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT

The kprobes optimization check can_optimize() calls
insn_is_indirect_jump() to detect indirect jump instructions in
a target function. If any is found, creating an optprobe is disallowed
in the function because the jump could be from a jump table and could
potentially land in the middle of the target optprobe.

With retpolines, insn_is_indirect_jump() additionally looks for calls to
indirect thunks which the compiler potentially used to replace original
jumps. This extra check is however unnecessary because jump tables are
disabled when the kernel is built with retpolines. The same is currently
the case with IBT.

Based on this observation, remove the logic to look for calls to
indirect thunks and skip the check for indirect jumps altogether if the
kernel is built with retpolines or IBT. Remove subsequently the symbols
__indirect_thunk_start and __indirect_thunk_end which are no longer
needed.

Dropping this logic indirectly fixes a problem where the range
[__indirect_thunk_start, __indirect_thunk_end] wrongly included also the
return thunk. It caused that machines which used the return thunk as
a mitigation and didn't have it patched by any alternative ended up not
being able to use optprobes in any regular function.

Fixes: 0b53c374b9ef ("x86/retpoline: Use -mfunction-return")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20230711091952.27944-3-petr.pavlu@suse.com

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next

Pull perf tools updates from Namhyung Kim:
"Internal cleanup:

- Refactor PMU d

Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next

Pull perf tools updates from Namhyung Kim:
"Internal cleanup:

- Refactor PMU data management to handle hybrid systems in a generic
way.

Do more work in the lexer so that legacy event types parse more
easily. A side-effect of this is that if a PMU is specified,
scanning sysfs is avoided improving start-up time.

- Fix hybrid metrics, for example, the TopdownL1 works for both
performance and efficiency cores on Intel machines. To support
this, sort and regroup events after parsing.

- Add reference count checking for the 'thread' data structure.

- Lots of fixes for memory leaks in various places thanks to the ASAN
and Ian's refcount checker.

- Reduce the binary size by replacing static variables with local or
dynamically allocated memory.

- Introduce shared_mutex for annotate data to reduce memory
footprint.

- Make filesystem access library functions more thread safe.

Test:

- Organize cpu_map tests into a single suite.

- Add metric value validation test to check if the values are within
correct value ranges.

- Add perf stat stdio output test to check if event and metric names
match.

- Add perf data converter JSON output test.

- Fix a lot of issues reported by shellcheck(1). This is a
preparation to enable shellcheck by default.

- Make the large x86 new instructions test optional at build time
using EXTRA_TESTS=1.

- Add a test for libpfm4 events.

perf script:

- Add 'dsoff' outpuf field to display offset from the DSO.

$ perf script -F comm,pid,event,ip,dsoff
ls 2695501 cycles: 152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
ls 2695501 cycles: ffffffff99045b3e ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968e107 ([kernel.kallsyms])
ls 2695501 cycles: ffffffffc1f54afb ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968382f ([kernel.kallsyms])
ls 2695501 cycles: ffffffff99e00094 ([kernel.kallsyms])
ls 2695501 cycles: 152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
ls 2695501 cycles: ffffffff992a6db0 ([kernel.kallsyms])

- Adjust width for large PID/TID values.

perf report:

- Robustify reading addr2line output for srcline by checking sentinel
output before the actual data and by using timeout of 1 second.

- Allow config terms (like 'name=ABC') with breakpoint events.

$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1

perf annotate:

- Handle x86 instruction suffix like 'l' in 'movl' generally.

- Parse instruction operands properly even with a whitespace. This is
needed for llvm-objdump output.

- Support RISC-V binutils lookup using the triplet prefixes.

- Add '<' and '>' key to navigate to prev/next symbols in TUI.

- Fix instruction association and parsing for LoongArch.

perf stat:

- Add --per-cache aggregation option, optionally specify a cache
level like `--per-cache=L2`.

$ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207\
perf bench sched messaging -p -t -l 100000 -g 8

# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 8 groups == 320 threads run

Total time: 7.648 [sec]

Performance counter stats for 'system wide':

S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote

7.779171484 seconds time elapsed

- Change default (no event/metric) formatting for default metrics so
that events are hidden and the metric and group appear.

Performance counter stats for 'ls /':

1.85 msec task-clock # 0.594 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
97 page-faults # 52.517 K/sec
2,187,173 cycles # 1.184 GHz
2,474,459 instructions # 1.13 insn per cycle
531,584 branches # 287.805 M/sec
13,626 branch-misses # 2.56% of all branches
TopdownL1 # 23.5 % tma_backend_bound
# 11.5 % tma_bad_speculation
# 39.1 % tma_frontend_bound
# 25.9 % tma_retiring

- Allow --cputype option to have any PMU name (not just hybrid).

- Fix output value not to added when it runs multiple times with -r
option.

perf list:

- Show metricgroup description from JSON file called
metricgroups.json.

- Allow 'pfm' argument to list only libpfm4 events and check each
event is supported before showing it.

JSON vendor events:

- Avoid event grouping using "NO_GROUP_EVENTS" constraints. The
topdown events are correctly grouped even if no group exists.

- Add "Default" metric group to print it in the default output. And
use "DefaultMetricgroupName" to indicate the real metric group
name.

- Add AmpereOne core PMU events.

Misc:

- Define man page date correctly.

- Track exception level properly on ARM CoreSight ETM.

- Allow anonymous struct, union or enum when retrieving type names
from DWARF.

- Fix incorrect filename when calling `perf inject --jit`.

- Handle PLT size correctly on LoongArch"

* tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits)
perf test: Skip metrics w/o event name in stat STD output linter
perf test: Reorder event name checks in stat STD output linter
perf pmu: Remove a hard coded cpu PMU assumption
perf pmus: Add notion of default PMU for JSON events
perf unwind: Fix map reference counts
perf test: Set PERF_EXEC_PATH for script execution
perf script: Initialize buffer for regs_map()
perf tests: Fix test_arm_callgraph_fp variable expansion
perf symbol: Add LoongArch case in get_plt_sizes()
perf test: Remove x permission from lib/stat_output.sh
perf test: Rerun failed metrics with longer workload
perf test: Add skip list for metrics known would fail
perf test: Add metric value validation test
perf jit: Fix incorrect file name in DWARF line table
perf annotate: Fix instruction association and parsing for LoongArch
perf annotation: Switch lock from a mutex to a sharded_mutex
perf sharded_mutex: Introduce sharded_mutex
tools: Fix incorrect calculation of object size by sizeof
perf subcmd: Fix missing check for return value of malloc() in add_cmdname()
perf parse-events: Remove unneeded semicolon
...

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>