Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:

- Use BPF + BTF to collect and

Merge tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:

- Use BPF + BTF to collect and pretty print syscall and tracepoint
arguments in 'perf trace', done as an GSoC activity

- Data-type profiling improvements:

- Cache debuginfo to speed up data type resolution

- Add the 'typecln' sort order, to show which cacheline in a target
is hot or cold. The following shows members in the cfs_rq's first
cache line:

$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)

- When a typedef resolves to a unnamed struct, use the typedef name

- When a struct has just one basic type field (int, etc), resolve
the type sort order to the name of the struct, not the type of
the field

- Support type folding/unfolding in the data-type annotation TUI

- Fix bitfields offsets and sizes

- Initial support for PowerPC, using libcapstone and the usual
objdump disassembly parsing routines

- Add support for disassembling and addr2line using the LLVM libraries,
speeding up those operations

- Support --addr2line option in 'perf script' as with other tools

- Intel branch counters (LBR event logging) support, only available in
recent Intel processors, for instance, the new "brcntr" field can be
asked from 'perf script' to print the information collected from this
feature:

$ perf script -F +brstackinsn,+brcntr

# Branch counter abbr list:
# branch-instructions:ppp = A
# branch-misses = B
# '-' No event occurs
# '+' Event occurrences may be lost due to branch counter saturated
tchain_edit 332203 3366329.405674: 53030 branch-instructions:ppp: 401781 f3+0x2c (home/sdp/test/tchain_edit)
f3+31:
0000000000401774 insn: eb 04 br_cntr: AA # PRED 5 cycles [5]
000000000040177a insn: 81 7d fc 0f 27 00 00
0000000000401781 insn: 7e e3 br_cntr: A # PRED 1 cycles [6] 2.00 IPC
0000000000401766 insn: 8b 45 fc
0000000000401769 insn: 83 e0 01
000000000040176c insn: 85 c0
000000000040176e insn: 74 06 br_cntr: A # PRED 1 cycles [7] 4.00 IPC
0000000000401776 insn: 83 45 fc 01
000000000040177a insn: 81 7d fc 0f 27 00 00
0000000000401781 insn: 7e e3 br_cntr: A # PRED 7 cycles [14] 0.43 IPC

- Support Timed PEBS (Precise Event-Based Sampling), a recent hardware
feature in Intel processors

- Add 'perf ftrace profile' subcommand, using ftrace's function-graph
tracer so that users can see the total, average, max execution time
as well as the number of invocations easily, for instance:

$ sudo perf ftrace profile -G __x64_sys_perf_event_open -- \
perf stat -e cycles -C1 true 2> /dev/null | head
# Total (us) Avg (us) Max (us) Count Function
65.611 65.611 65.611 1 __x64_sys_perf_event_open
30.527 30.527 30.527 1 anon_inode_getfile
30.260 30.260 30.260 1 __anon_inode_getfile
29.700 29.700 29.700 1 alloc_file_pseudo
17.578 17.578 17.578 1 d_alloc_pseudo
17.382 17.382 17.382 1 __d_alloc
16.738 16.738 16.738 1 kmem_cache_alloc_lru
15.686 15.686 15.686 1 perf_event_alloc
14.012 7.006 11.264 2 obj_cgroup_charge

- 'perf sched timehist' improvements, including the addition of
priority showing/filtering command line options

- Varios improvements to the 'perf probe', including 'perf test'
regression testings

- Introduce the 'perf check', initially to check if some feature is
in place, using it in 'perf test'

- Various fixes for 32-bit systems

- Address more leak sanitizer failures

- Fix memory leaks (LBR, disasm lock ops, etc)

- More reference counting fixes (branch_info, etc)

- Constify 'struct perf_tool' parameters to improve code generation
and reduce the chances of having its internals changed, which isn't
expected

- More constifications in various other places

- Add more build tests, including for JEVENTS

- Add more 'perf test' entries ('perf record LBR', pipe/inject,
--setup-filter, 'perf ftrace', 'cgroup sampling', etc)

- Inject build ids for all entries in a call chain in 'perf inject',
not just for the main sample

- Improve the BPF based sample filter, allowing root to setup filters
in bpffs that then can be used by non-root users

- Allow filtering by cgroups with the BPF based sample filter

- Allow a more compact way for 'perf mem report' using the
-T/--type-profile and also provide a --sort option similar to the one
in 'perf report', 'perf top', to setup the sort order manually

- Fix --group behavior in 'perf annotate' when leader has no samples,
where it was not showing anything even when other events in the group
had samples

- Fix spinlock and rwlock accounting in 'perf lock contention'

- Fix libsubcmd fixdep Makefile dependencies

- Improve 'perf ftrace' error message when ftrace isn't available

- Update various Intel JSON vendor event files

- ARM64 CoreSight hardware tracing infrastructure improvements, mostly
not visible to users

- Update power10 JSON events

* tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (310 commits)
perf trace: Mark the 'head' arg in the set_robust_list syscall as coming from user space
perf trace: Mark the 'rseq' arg in the rseq syscall as coming from user space
perf env: Find correct branch counter info on hybrid
perf evlist: Print hint for group
tools: Drop nonsensical -O6
perf pmu: To info add event_type_desc
perf evsel: Add accessor for tool_event
perf pmus: Fake PMU clean up
perf list: Avoid potential out of bounds memory read
perf help: Fix a typo ("bellow")
perf ftrace: Detect whether ftrace is enabled on system
perf test shell probe_vfs_getname: Remove extraneous '=' from probe line number regex
perf build: Require at least clang 16.0.6 to build BPF skeletons
perf trace: If a syscall arg is marked as 'const', assume it is coming _from_ userspace
perf parse-events: Remove duplicated include in parse-events.c
perf callchain: Allow symbols to be optional when resolving a callchain
perf inject: Lazy build-id mmap2 event insertion
perf inject: Add new mmap2-buildid-all option
perf inject: Fix build ID injection
perf annotate-data: Add pr_debug_scope()
...

show more ...

perf report: Support LLVM for addr2line()

In addition to the existing support for libbfd and calling out to
an external addr2line command, add support for using libllvm directly.

This is both faste

perf report: Support LLVM for addr2line()

In addition to the existing support for libbfd and calling out to
an external addr2line command, add support for using libllvm directly.

This is both faster than libbfd, and can be enabled in distro builds
(the LLVM license has an explicit provision for GPLv2 compatibility).

Thus, it is set as the primary choice if available.

As an example, running 'perf report' on a medium-size profile with
DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with
libbfd, 153 seconds with external llvm-addr2line, and I got tired and
aborted the test after waiting for 55 minutes with external bfd
addr2line (which is the default for perf as compiled by distributions
today).

Evidently, for this case, the bfd addr2line process needs 18 seconds (on
a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second
timeout and gets killed during initialization, getting restarted anew
every time. Having an in-process addr2line makes this much more robust.

As future extensions, libllvm can be used in many other places where
we currently use libbfd or other libraries:

- Symbol enumeration (in particular, for PE binaries).
- Demangling (including non-Itanium demangling, e.g. Microsoft
or Rust).
- Disassembling (perf annotate).

However, these are much less pressing; most people don't profile PE
binaries, and perf has non-bfd paths for ELF. The same with demangling;
the default _cxa_demangle path works fine for most users, and while bfd
objdump can be slow on large binaries, it is possible to use
--objdump=llvm-objdump to get the speed benefits. (It appears
LLVM-based demangling is very simple, should we want that.)

Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not
correctly detected using feature_check, and thus was not tested.

Committer notes:

Added the name and a __maybe_unused to address:

1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC)
util/srcline.c: In function 'dso__free_a2l':
util/srcline.c:184:20: error: parameter name omitted
void dso__free_a2l(struct dso *)
^~~~~~~~~~~~
make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2

Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240803152008.2818485-1-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
"Build:

- Build each directory as a libra

Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
"Build:

- Build each directory as a library so that depedency check for the
python extension module can be automatic

- Use pkg-config to check libtraceevent and libtracefs

perf sched:

- Add --task-name and --fuzzy-name options for `perf sched map`

It focuses on selected tasks only by removing unrelated tasks in
the output. It matches the task comm with the given string and the
--fuzzy-name option allows the partial matching:

$ sudo perf sched record -a sleep 1

$ sudo perf sched map --task-name kworker --fuzzy-name
. . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521
. . . . - *- . . 481065.315160 secs
*B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860
*- . . . . . . . 481065.316441 secs
. . . . . *A0 . . 481065.318703 secs
. . . . . *- . . 481065.318717 secs
. . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186
. . *- . . . . . 481065.320555 secs
. . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654
*B0 . D0 . - . . . 481065.328527 secs
*- . D0 . - . . . 481065.328535 secs
. . *- . . . . . 481065.328535 secs

- Fix -r/--repeat option of perf sched replay

The documentation said -1 will work as infinity but it didn't
accept the value. Update the code and document to use 0 instead

- Fix perf sched timehist to account the delay time for preempted
tasks

Perf event filtering:

- perf top gained filtering support on regular events using BPF like
perf record. Previously it was able to use it for tracepoints only

- The BPF filter now supports filtering by UID/GID. This should be
preferred than -u <UID> option as it's racy to scan /proc to check
tasks for the user and fails to open an event for the task if it's
already gone

$ sudo perf top -e cycles --filter "uid == $(id -u)"

perf report:

- Skip dummy events in the group output by default. The --skip-empty
option controls display of empty events without samples. But perf
report can force display all events in a group

In this case, auto-added a dummy event (for a system-wide record)
ends up in the output. Now it can skip those empty events even in
the group display mode

To preserve the old behavior, run this:

$ perf report --group --no-skip-empty

perf stat:

- Choose the most disaggregate option when multiple aggregation
options are given. It used to pick the last option in the command
line but it can be confusing and not consistent. Now it'll choose
the smallest unit

For example, it'd aggregate the result per-core when the user gave
both --per-socket and --per-core options at the same time

Internals:

- Fix `perf bench` when some CPUs are offline

- Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
patterns only so that it can not be confused by other /tmp/perf-*
files

- Many improvements and fixes for `perf test`

Others:

- Support some new instructions for Intel-PT

- Fix syscall ID mapping in perf trace

- Document AMD IBS PMU usages

- Change `perf lock info` to show map and thread info by default

Vendor JSON events:

- Update Intel events and metrics

- Add i.MX9[35] DDR metrics"

* tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits)
perf trace: Fix iteration of syscall ids in syscalltbl->entries
perf dso: Fix address sanitizer build
perf mem: Warn if memory events are not supported on all CPUs
perf arm-spe: Support multiple Arm SPE PMUs
perf build x86: Fix SC2034 error in syscalltbl.sh
perf record: Fix memset out-of-range error
perf sched map: Add --fuzzy-name option for fuzzy matching in task names
perf sched map: Add support for multiple task names using CSV
perf sched map: Add task-name option to filter the output map
perf build: Conditionally add feature check flags for libtrace{event,fs}
perf install: Don't propagate subdir to Documentation submake
perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics
perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
perf report: Calling available function for stats printing
perf intel-pt: Fix exclude_guest setting
perf intel-pt: Fix aux_watermark calculation for 64-bit size
perf sched replay: Fix -r/--repeat command line option for infinity
perf: pmus: Remove unneeded semicolon
...

show more ...

perf dso: Fix address sanitizer build

Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor

perf dso: Fix address sanitizer build

Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.

Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

tools/perf: Use is_perf_pid_map_name helper function to check dso's of pattern /tmp/perf-%d.map

commit 80d496be89ed ("perf report: Add support for profiling JIT
generated code") added support for pr

tools/perf: Use is_perf_pid_map_name helper function to check dso's of pattern /tmp/perf-%d.map

commit 80d496be89ed ("perf report: Add support for profiling JIT
generated code") added support for profiling JIT generated code.
This patch handles dso's of form "/tmp/perf-$PID.map".

Some of the references doesn't check exactly for same pattern.
some uses "if (!strncmp(dso_name, "/tmp/perf-", 10))". Fix
this by using helper function perf_pid_map_tid and
is_perf_pid_map_name which looks for proper pattern of
form: "/tmp/perf-$PID.map" for these checks.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-2-atrajeev@linux.vnet.ibm.com

show more ...

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>