Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:

- Use BPF + BTF to collect and

Merge tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:

- Use BPF + BTF to collect and pretty print syscall and tracepoint
arguments in 'perf trace', done as an GSoC activity

- Data-type profiling improvements:

- Cache debuginfo to speed up data type resolution

- Add the 'typecln' sort order, to show which cacheline in a target
is hot or cold. The following shows members in the cfs_rq's first
cache line:

$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)

- When a typedef resolves to a unnamed struct, use the typedef name

- When a struct has just one basic type field (int, etc), resolve
the type sort order to the name of the struct, not the type of
the field

- Support type folding/unfolding in the data-type annotation TUI

- Fix bitfields offsets and sizes

- Initial support for PowerPC, using libcapstone and the usual
objdump disassembly parsing routines

- Add support for disassembling and addr2line using the LLVM libraries,
speeding up those operations

- Support --addr2line option in 'perf script' as with other tools

- Intel branch counters (LBR event logging) support, only available in
recent Intel processors, for instance, the new "brcntr" field can be
asked from 'perf script' to print the information collected from this
feature:

$ perf script -F +brstackinsn,+brcntr

# Branch counter abbr list:
# branch-instructions:ppp = A
# branch-misses = B
# '-' No event occurs
# '+' Event occurrences may be lost due to branch counter saturated
tchain_edit 332203 3366329.405674: 53030 branch-instructions:ppp: 401781 f3+0x2c (home/sdp/test/tchain_edit)
f3+31:
0000000000401774 insn: eb 04 br_cntr: AA # PRED 5 cycles [5]
000000000040177a insn: 81 7d fc 0f 27 00 00
0000000000401781 insn: 7e e3 br_cntr: A # PRED 1 cycles [6] 2.00 IPC
0000000000401766 insn: 8b 45 fc
0000000000401769 insn: 83 e0 01
000000000040176c insn: 85 c0
000000000040176e insn: 74 06 br_cntr: A # PRED 1 cycles [7] 4.00 IPC
0000000000401776 insn: 83 45 fc 01
000000000040177a insn: 81 7d fc 0f 27 00 00
0000000000401781 insn: 7e e3 br_cntr: A # PRED 7 cycles [14] 0.43 IPC

- Support Timed PEBS (Precise Event-Based Sampling), a recent hardware
feature in Intel processors

- Add 'perf ftrace profile' subcommand, using ftrace's function-graph
tracer so that users can see the total, average, max execution time
as well as the number of invocations easily, for instance:

$ sudo perf ftrace profile -G __x64_sys_perf_event_open -- \
perf stat -e cycles -C1 true 2> /dev/null | head
# Total (us) Avg (us) Max (us) Count Function
65.611 65.611 65.611 1 __x64_sys_perf_event_open
30.527 30.527 30.527 1 anon_inode_getfile
30.260 30.260 30.260 1 __anon_inode_getfile
29.700 29.700 29.700 1 alloc_file_pseudo
17.578 17.578 17.578 1 d_alloc_pseudo
17.382 17.382 17.382 1 __d_alloc
16.738 16.738 16.738 1 kmem_cache_alloc_lru
15.686 15.686 15.686 1 perf_event_alloc
14.012 7.006 11.264 2 obj_cgroup_charge

- 'perf sched timehist' improvements, including the addition of
priority showing/filtering command line options

- Varios improvements to the 'perf probe', including 'perf test'
regression testings

- Introduce the 'perf check', initially to check if some feature is
in place, using it in 'perf test'

- Various fixes for 32-bit systems

- Address more leak sanitizer failures

- Fix memory leaks (LBR, disasm lock ops, etc)

- More reference counting fixes (branch_info, etc)

- Constify 'struct perf_tool' parameters to improve code generation
and reduce the chances of having its internals changed, which isn't
expected

- More constifications in various other places

- Add more build tests, including for JEVENTS

- Add more 'perf test' entries ('perf record LBR', pipe/inject,
--setup-filter, 'perf ftrace', 'cgroup sampling', etc)

- Inject build ids for all entries in a call chain in 'perf inject',
not just for the main sample

- Improve the BPF based sample filter, allowing root to setup filters
in bpffs that then can be used by non-root users

- Allow filtering by cgroups with the BPF based sample filter

- Allow a more compact way for 'perf mem report' using the
-T/--type-profile and also provide a --sort option similar to the one
in 'perf report', 'perf top', to setup the sort order manually

- Fix --group behavior in 'perf annotate' when leader has no samples,
where it was not showing anything even when other events in the group
had samples

- Fix spinlock and rwlock accounting in 'perf lock contention'

- Fix libsubcmd fixdep Makefile dependencies

- Improve 'perf ftrace' error message when ftrace isn't available

- Update various Intel JSON vendor event files

- ARM64 CoreSight hardware tracing infrastructure improvements, mostly
not visible to users

- Update power10 JSON events

* tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (310 commits)
perf trace: Mark the 'head' arg in the set_robust_list syscall as coming from user space
perf trace: Mark the 'rseq' arg in the rseq syscall as coming from user space
perf env: Find correct branch counter info on hybrid
perf evlist: Print hint for group
tools: Drop nonsensical -O6
perf pmu: To info add event_type_desc
perf evsel: Add accessor for tool_event
perf pmus: Fake PMU clean up
perf list: Avoid potential out of bounds memory read
perf help: Fix a typo ("bellow")
perf ftrace: Detect whether ftrace is enabled on system
perf test shell probe_vfs_getname: Remove extraneous '=' from probe line number regex
perf build: Require at least clang 16.0.6 to build BPF skeletons
perf trace: If a syscall arg is marked as 'const', assume it is coming _from_ userspace
perf parse-events: Remove duplicated include in parse-events.c
perf callchain: Allow symbols to be optional when resolving a callchain
perf inject: Lazy build-id mmap2 event insertion
perf inject: Add new mmap2-buildid-all option
perf inject: Fix build ID injection
perf annotate-data: Add pr_debug_scope()
...

show more ...

perf report: Name events in stats for pipe mode

In stats mode PERF_RECORD_EVENT_UPDATE isn't being handled meaning the
evsels aren't named when handling pipe mode output.

Before:

$ perf record -

perf report: Name events in stats for pipe mode

In stats mode PERF_RECORD_EVENT_UPDATE isn't being handled meaning the
evsels aren't named when handling pipe mode output.

Before:

$ perf record -e inst_retired.any -a -o - sleep 0.1|perf report --stats -i -
...
Aggregated stats:
TOTAL events: 23358
COMM events: 2608 (11.2%)
EXIT events: 1 ( 0.0%)
FORK events: 2607 (11.2%)
SAMPLE events: 174 ( 0.7%)
MMAP2 events: 17936 (76.8%)
ATTR events: 2 ( 0.0%)
FINISHED_ROUND events: 2 ( 0.0%)
ID_INDEX events: 1 ( 0.0%)
THREAD_MAP events: 1 ( 0.0%)
CPU_MAP events: 1 ( 0.0%)
EVENT_UPDATE events: 3 ( 0.0%)
TIME_CONV events: 1 ( 0.0%)
FEATURE events: 20 ( 0.1%)
FINISHED_INIT events: 1 ( 0.0%)
raw 0xc0 stats:
SAMPLE events: 174

After:

$ perf record -e inst_retired.any -a -o - sleep 0.1|perf report --stats -i -
...
Aggregated stats:
TOTAL events: 23742
COMM events: 2620 (11.0%)
EXIT events: 2 ( 0.0%)
FORK events: 2619 (11.0%)
SAMPLE events: 165 ( 0.7%)
MMAP2 events: 18304 (77.1%)
ATTR events: 2 ( 0.0%)
FINISHED_ROUND events: 2 ( 0.0%)
ID_INDEX events: 1 ( 0.0%)
THREAD_MAP events: 1 ( 0.0%)
CPU_MAP events: 1 ( 0.0%)
EVENT_UPDATE events: 3 ( 0.0%)
TIME_CONV events: 1 ( 0.0%)
FEATURE events: 20 ( 0.1%)
FINISHED_INIT events: 1 ( 0.0%)
inst_retired.any stats:
SAMPLE events: 165

This makes the pipe output match the regular output.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240827212757.1469340-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Print lost samples due to BPF filter

Print the actual dropped sample count in the event stat.

$ sudo perf record -o- -e cycles --filter 'period < 10000' \
-e instructions --filt

perf tools: Print lost samples due to BPF filter

Print the actual dropped sample count in the event stat.

$ sudo perf record -o- -e cycles --filter 'period < 10000' \
-e instructions --filter 'ip > 0x8000000000000000' perf test -w noploop | \
perf report --stat -i-
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.058 MB - ]

Aggregated stats:
TOTAL events: 469
MMAP events: 268 (57.1%)
COMM events: 2 ( 0.4%)
EXIT events: 1 ( 0.2%)
SAMPLE events: 16 ( 3.4%)
MMAP2 events: 22 ( 4.7%)
LOST_SAMPLES events: 2 ( 0.4%)
KSYMBOL events: 89 (19.0%)
BPF_EVENT events: 39 ( 8.3%)
ATTR events: 2 ( 0.4%)
FINISHED_ROUND events: 1 ( 0.2%)
ID_INDEX events: 1 ( 0.2%)
THREAD_MAP events: 1 ( 0.2%)
CPU_MAP events: 1 ( 0.2%)
EVENT_UPDATE events: 2 ( 0.4%)
TIME_CONV events: 1 ( 0.2%)
FEATURE events: 20 ( 4.3%)
FINISHED_INIT events: 1 ( 0.2%)
cycles stats:
SAMPLE events: 2
LOST_SAMPLES (BPF) events: 4010
instructions stats:
SAMPLE events: 14
LOST_SAMPLES (BPF) events: 3990

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240820154504.128923-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

perf report: Display the branch counter histogram

Reusing the existing --total-cycles option to display the branch
counters. Add a new PERF_HPP_REPORT__BLOCK_BRANCH_COUNTER to display
the logged bra

perf report: Display the branch counter histogram

Reusing the existing --total-cycles option to display the branch
counters. Add a new PERF_HPP_REPORT__BLOCK_BRANCH_COUNTER to display
the logged branch counter events. They are shown right after all the
cycle-related annotations.

Extend the 'struct block_info' to store and pass the branch counter
related information.

The annotation_br_cntr_entry() is to print the histogram of each branch
counter event. If the number of logged events is less than 4, the exact
number of the abbr name is printed. Otherwise, using '+' to stands for
more than 3 events.

Assume the number of logged events is less than 4.

The annotation_br_cntr_abbr_list() prints the branch counter's
abbreviation list. Press 'B' to display the list in the TUI mode.

$ perf record -e "{branch-instructions:ppp,branch-misses}:S" -j any,counter
$ perf report --total-cycles --stdio

# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1M of events 'anon group { branch-instructions:ppp, branch-misses }'
# Event count (approx.): 1610046
#
# Branch counter abbr list:
# branch-instructions:ppp = A
# branch-misses = B
# '-' No event occurs
# '+' Event occurrences may be lost due to branch counter saturated
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles Branch Counter [Program Block Range]
# ............... .............. ........... .......... .............. ..................
#
57.55% 2.5M 0.00% 3 |A |- | ...
25.27% 1.1M 0.00% 2 |AA |- | ...
15.61% 667.2K 0.00% 1 |A |- | ...
0.16% 6.9K 0.81% 575 |A |- | ...
0.16% 6.8K 1.38% 977 |AA |- | ...
0.16% 6.8K 0.04% 28 |AA |B | ...
0.15% 6.6K 1.33% 946 |A |- | ...
0.11% 4.5K 0.06% 46 |AAA+|- | ...
0.10% 4.4K 0.88% 624 |A |- | ...
0.09% 3.7K 0.74% 524 |AAA+|B | ...

With -v applied,

# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles Branch Counter [Program Block Range]
# ............... .............. ........... .......... .............. ..................
#
57.55% 2.5M 0.00% 3 A=1 ,B=- ...
25.27% 1.1M 0.00% 2 A=2 ,B=- ...
15.61% 667.2K 0.00% 1 A=1 ,B=- ...
0.16% 6.9K 0.81% 575 A=1 ,B=- ...
0.16% 6.8K 1.38% 977 A=2 ,B=- ...
0.16% 6.8K 0.04% 28 A=2 ,B=1 ...
0.15% 6.6K 1.33% 946 A=1 ,B=- ...
0.11% 4.5K 0.06% 46 A=3+,B=- ...
0.10% 4.4K 0.88% 624 A=1 ,B=- ...
0.09% 3.7K 0.74% 524 A=3+,B=1 ...

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240813160208.2493643-7-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf annotate: Save branch counters for each block

When annotating a basic block, it's useful to display the occurrences
of other events in the block.

The branch counter feature is only available f

perf annotate: Save branch counters for each block

When annotating a basic block, it's useful to display the occurrences
of other events in the block.

The branch counter feature is only available for newer Intel platforms.

So a dedicated option to display the branch counters is not introduced.

Reuse the existing --total-cycles option, which triggers the annotation
of a basic block and displays the cycle-related annotation.

When the branch counters information is available, the branch counters
are automatically appended after all the cycle-related annotation.

Accounting the branch counters as well when accounting the cycles in
hist__account_cycles().

In 'struct annotated_branch', introduce a br_cntr array to save the
accumulation of each branch counter.

In a sample, all the branch counters for a branch are saved in a u64
space.

Because the saturation of a branch counter is small, e.g., for Intel
Sierra Forest, the saturation is only 3.

Add ANNOTATION__BR_CNTR_SATURATED_FLAG to indicate if a branch counter
once saturated. That can be used to indicate a potential event lost
because of the saturation.

Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240813160208.2493643-5-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf report: Fix --total-cycles --stdio output error

The --total-cycles may output wrong information with the --stdio.

For example:

# perf record -e "{cycles,instructions}",cache-misses -b sleep

perf report: Fix --total-cycles --stdio output error

The --total-cycles may output wrong information with the --stdio.

For example:

# perf record -e "{cycles,instructions}",cache-misses -b sleep 1
# perf report --total-cycles --stdio

The total cycles output of {cycles,instructions} and cache-misses are
almost the same.

# Samples: 938 of events 'anon group { cycles, instructions }'
# Event count (approx.): 938
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range]
# ............... .............. ........... .......... ..................................................>
#
11.19% 2.6K 0.10% 21 [perf_iterate_ctx+48 -> >
5.79% 1.4K 0.45% 97 [__intel_pmu_enable_all.constprop.0+80 -> __intel_>
5.11% 1.2K 0.33% 71 [native_write_msr+0 ->>

# Samples: 293 of event 'cache-misses'
# Event count (approx.): 293
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range]
# ............... .............. ........... .......... ..................................................>
#
11.19% 2.6K 0.13% 21 [perf_iterate_ctx+48 -> >
5.79% 1.4K 0.59% 97 [__intel_pmu_enable_all.constprop.0+80 -> __intel_>
5.11% 1.2K 0.43% 71 [native_write_msr+0 ->>

With the symbol_conf.event_group, the 'perf report' should only report the
block information of the leader event in a group.

However, the current implementation retrieves the next event's block
information, rather than the next group leader's block information.

Make sure the index is updated even if the event is skipped.

With the patch,

# Samples: 293 of event 'cache-misses'
# Event count (approx.): 293
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range]
# ............... .............. ........... .......... ..................................................>
#
37.98% 9.0K 4.05% 299 [perf_event_addr_filters_exec+0 -> perf_event_a>
11.19% 2.6K 0.28% 21 [perf_iterate_ctx+48 -> >
5.79% 1.4K 1.32% 97 [__intel_pmu_enable_all.constprop.0+80 -> __intel_>

Fixes: 6f7164fa231a5f36 ("perf report: Sort by sampled cycles percent per block for stdio")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240813160208.2493643-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf report: Use perf_tool__init()

Use perf_tool__init() so that more uses of 'struct perf_tool' can be const
and not relying on perf_tool__fill_defaults().

Signed-off-by: Ian Rogers <irogers@googl

perf report: Use perf_tool__init()

Use perf_tool__init() so that more uses of 'struct perf_tool' can be const
and not relying on perf_tool__fill_defaults().

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tool: Constify tool pointers

The tool pointer (to a struct largely of function pointers) is passed
around but is unchanged except at initialization. Change parameter and
variable types to be co

perf tool: Constify tool pointers

The tool pointer (to a struct largely of function pointers) is passed
around but is unchanged except at initialization. Change parameter and
variable types to be const to lower the possibilities of what could
happen with a tool.

Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Add mode argument to sort_help()

Some sort keys are meaningful only in a specific mode - like branch
stack and memory (data-src). Add the mode to skip unnecessary ones.
This will be use

perf tools: Add mode argument to sort_help()

Some sort keys are meaningful only in a specific mode - like branch
stack and memory (data-src). Add the mode to skip unnecessary ones.
This will be used for 'perf mem report' later.

While at it, change the prefix for the -F/--fields option to remove
the duplicate part.

Before:

$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]

-F, --fields <key[,keys...]>
output field(s): overhead period sample overhead overhead_sys
overhead_us overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...
After:

$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]

-F, --fields <key[,keys...]>
output field(s): overhead overhead_sys overhead_us
overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.