Merge tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf-tools updates from Namhyung Kim:
"There are a lot of changes in the perf tools

Merge tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf-tools updates from Namhyung Kim:
"There are a lot of changes in the perf tools in this cycle.

build:

- Use generic syscall table to generate syscall numbers on supported
archs

- This also enables to get rid of libaudit which was used for syscall
numbers

- Remove python2 support as it's deprecated for years

- Fix issues on static build with libzstd

perf record:

- Intel-PT supports "aux-action" config term to pause or resume
tracing in the aux-buffer. Users can start the intel_pt event as
"started-paused" and configure other events to control the Intel-PT
tracing:

# perf record --kcore -e intel_pt/aux-action=start-paused/ \
-e syscalls:sys_enter_newuname/aux-action=resume/ \
-e syscalls:sys_exit_newuname/aux-action=pause/ -- uname

This requires kernel support (which was added in v6.13)

perf lock:

- 'perf lock contention' command has an ability to symbolize locks in
dynamically allocated objects using slab cache name when it runs
with BPF. Those dynamic locks would have "&" prefix in the name to
distinguish them from ordinary (static) locks

# perf lock con -abl -E 5 sleep 1
contended total wait max wait avg wait address symbol

2 1.95 us 1.77 us 975 ns ffff9d5e852d3498 &task_struct (mutex)
1 1.18 us 1.18 us 1.18 us ffff9d5e852d3538 &task_struct (mutex)
4 1.12 us 354 ns 279 ns ffff9d5e841ca800 &kmalloc-cg-512 (mutex)
2 859 ns 617 ns 429 ns ffffffffa41c3620 delayed_uprobe_lock (mutex)
3 691 ns 388 ns 230 ns ffffffffa41c0940 pack_mutex (mutex)

This also requires kernel/BPF support (which was added in v6.13)

perf ftrace:

- 'perf ftrace latency' command gets a couple of options to support
linear buckets instead of exponential. Also it's possible to
specify max and min latency for the linear buckets:

# perf ftrace latency -abn -T switch_mm_irqs_off --bucket-range=100 \
--min-latency=200 --max-latency=800 -- sleep 1
# DURATION | COUNT | GRAPH |
0 - 200 ns | 186 | ### |
200 - 300 ns | 256 | ##### |
300 - 400 ns | 364 | ####### |
400 - 500 ns | 223 | #### |
500 - 600 ns | 111 | ## |
600 - 700 ns | 41 | |
700 - 800 ns | 141 | ## |
800 - ... ns | 169 | ### |

# statistics (in nsec)
total time: 2162212
avg time: 967
max time: 16817
min time: 132
count: 2236

- As you can see in the above example, it nows shows the statistics
at the end so that users can see the avg/max/min latencies easily

- 'perf ftrace profile' command has --graph-opts option like 'perf
ftrace trace' so that it can control the tracing behaviors in the
same way. For example, it can limit the function call depth or
threshold

perf script:

- Improve physical memory resolution in 'mem-phys-addr' script by
parsing /proc/iomem file

# perf script mem-phys-addr -- find /
...
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-85f7fffff : System RAM 8929 69.7
547600000-54785d23f : Kernel data 1240 9.7
546a00000-5474bdfff : Kernel rodata 490 3.8
5480ce000-5485fffff : Kernel bss 121 0.9
0-fff : Reserved 3860 30.1
100000-89c01fff : System RAM 18 0.1
8a22c000-8df6efff : System RAM 5 0.0

Others:

- 'perf test' gets --runs-per-test option to run the test cases
repeatedly. This would be helpful to see if it's flaky

- Add 'parse_events' method to Python perf extension module, so that
users can use the same event parsing logic in the python code. One
more step towards implementing perf tools in Python. :)

- Support opening tracepoint events without libtraceevent. This will
be helpful if it won't use the tracing data like in 'perf stat'

- Update ARM Neoverse N2/V2 JSON events and metrics"

* tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (176 commits)
perf test: Update event_groups test to use instructions
perf bench: Fix undefined behavior in cmpworker()
perf annotate: Prefer passing evsel to evsel->core.idx
perf lock: Rename fields in lock_type_table
perf lock: Add percpu-rwsem for type filter
perf lock: Fix parse_lock_type which only retrieve one lock flag
perf lock: Fix return code for functions in __cmd_contention
perf hist: Fix width calculation in hpp__fmt()
perf hist: Fix bogus profiles when filters are enabled
perf hist: Deduplicate cmp/sort/collapse code
perf test: Improve verbose documentation
perf test: Add a runs-per-test flag
perf test: Fix parallel/sequential option documentation
perf test: Send list output to stdout rather than stderr
perf test: Rename functions and variables for better clarity
perf tools: Expose quiet/verbose variables in Makefile.perf
perf config: Add a function to set one variable in .perfconfig
perf test perftool_testsuite: Return correct value for skipping
perf test perftool_testsuite: Add missing description
perf test record+probe_libc_inet_pton: Make test resilient
...

show more ...

perf tools x86: Use generic syscall scripts

Use the generic scripts to generate headers from the syscall table for
both 32- and 64-bit x86.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tes

perf tools x86: Use generic syscall scripts

Use the generic scripts to generate headers from the syscall table for
both 32- and 64-bit x86.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-8-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge branch 'for-6.14/constify-bin-attribute' into for-linus

- constification of 'struct bin_attribute' in various HID driver (Thomas Weißschuh)

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
"perf record:

- Enable leader sampling fo

Merge tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
"perf record:

- Enable leader sampling for inherited task events. It was supported
only for system-wide events but the kernel started to support such
a setup since v6.12.

This is to reduce the number of PMU interrupts. The samples of the
leader event will contain counts of other events and no samples
will be generated for the other member events.

$ perf record -e '{cycles,instructions}:S' ${MYPROG}

perf report:

- Fix --branch-history option to display more branch-related
information like prediction, abort and cycles which is available
on Intel machines.

$ perf record -bg -- perf test -w brstack

$ perf report --branch-history
...
#
# Overhead Source:Line Symbol Shared Object Predicted Abort Cycles IPC [IPC Coverage]
# ........ ........................ .............. .................... ......... ..... ...... ....................
#
8.17% copy_page_64.S:19 [k] copy_page [kernel.kallsyms] 50.0% 0 5 - -
|
---xas_load xarray.h:171
|
|--5.68%--xas_load xarray.c:245 (cycles:1)
| xas_load xarray.c:242
| xas_load xarray.h:1260 (cycles:1)
| xas_descend xarray.c:146
| xas_load xarray.c:244 (cycles:2)
| xas_load xarray.c:245
| xas_descend xarray.c:218 (cycles:10)
...

perf stat:

- Add HWMON PMU support.

The HWMON provides various system information like CPU/GPU
temperature, fan speed and so on. Expose them as PMU events so that
users can see the values using perf stat commands.

$ perf stat -e temp_cpu,fan1 true

Performance counter stats for 'true':

60.00 'C temp_cpu
0 rpm fan1

0.000745382 seconds time elapsed

0.000883000 seconds user
0.000000000 seconds sys

- Display metric threshold in JSON output.

Some metrics define thresholds to classify value ranges. It used to
be in a different color but it won't work for JSON.

Add "metric-threshold" field to the JSON that can be one of "good",
"less good", "nearly bad" and "bad".

# perf stat -a -M TopdownL1 -j true
{"counter-value" : "18693525.000000", "unit" : "", "event" : "TOPDOWN.SLOTS", "event-runtime" : 5552708, "pcnt-running" : 100.00, "metric-value" : "43.226002", "metric-unit" : "% tma_backend_bound", "metric-threshold" : "bad"}
{"metric-value" : "29.212267", "metric-unit" : "% tma_frontend_bound", "metric-threshold" : "bad"}
{"metric-value" : "7.138972", "metric-unit" : "% tma_bad_speculation", "metric-threshold" : "good"}
{"metric-value" : "20.422759", "metric-unit" : "% tma_retiring", "metric-threshold" : "good"}
{"counter-value" : "3817732.000000", "unit" : "", "event" : "topdown-retiring", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "5472824.000000", "unit" : "", "event" : "topdown-fe-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "7984780.000000", "unit" : "", "event" : "topdown-be-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "1418181.000000", "unit" : "", "event" : "topdown-bad-spec", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
...

perf sched:

- Add -P/--pre-migrations option for 'timehist' sub-command to track
time a task waited on a run-queue before migrating to a different
CPU.

$ perf sched timehist -P
time cpu task name wait time sch delay run time pre-mig time
[tid/pid] (msec) (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- ---------
585940.535527 [0000] perf[584885] 0.000 0.000 0.000 0.000
585940.535535 [0000] migration/0[20] 0.000 0.002 0.008 0.000
585940.535559 [0001] perf[584885] 0.000 0.000 0.000 0.000
585940.535563 [0001] migration/1[25] 0.000 0.001 0.004 0.000
585940.535678 [0002] perf[584885] 0.000 0.000 0.000 0.000
585940.535686 [0002] migration/2[31] 0.000 0.002 0.008 0.000
585940.535905 [0001] <idle> 0.000 0.000 0.342 0.000
585940.535938 [0003] perf[584885] 0.000 0.000 0.000 0.000
585940.537048 [0001] sleep[584886] 0.000 0.019 1.142 0.001
585940.537749 [0002] <idle> 0.000 0.000 2.062 0.000
...

Build:

- Make libunwind opt-in (LIBUNWIND=1) rather than opt-out.

The perf tools are generally built with libelf and libdw which has
unwinder functionality. The libunwind support predates it and no
need to have duplicate unwinders by default.

- Rename NO_DWARF=1 build option to NO_LIBDW=1 in order to clarify
it's using libdw for handling DWARF information.

Internals:

- Do not set exclude_guest bit in the perf_event_attr by default.

This was causing a trouble in AMD IBS PMU as it doesn't support the
bit. The bit will be set when it's needed later by the fallback
logic. Also update the missing feature detection logic to make sure
not clear supported bits unnecessarily.

- Run perf test in parallel by default and mark flaky tests
"exclusive" to run them serially at the end. Some test numbers are
changed but the test can complete in less than half the time.

JSON vendor events:

- Add AMD Zen 5 events and metrics.

- Add i.MX91 and i.MX95 DDR metrics

- Fix HiSilicon HIP08 Topdown metric name.

- Support compat events on PowerPC"

* tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf tests: Fix hwmon parsing with PMU name test
perf hwmon_pmu: Ensure hwmon key union is zeroed before use
perf tests hwmon_pmu: Remove double evlist__delete()
perf/test: fix perf ftrace test on s390
perf bpf-filter: Return -ENOMEM directly when pfi allocation fails
perf test: Correct hwmon test PMU detection
perf: Remove unused del_perf_probe_events()
perf pmu: Move pmu_metrics_table__find and remove ARM override
perf jevents: Add map_for_cpu()
perf header: Pass a perf_cpu rather than a PMU to get_cpuid_str
perf header: Avoid transitive PMU includes
perf arm64 header: Use cpu argument in get_cpuid
perf header: Refactor get_cpuid to take a CPU for ARM
perf header: Move is_cpu_online to numa bench
perf jevents: fix breakage when do perf stat on system metric
perf test: Add missing __exit calls in tool/hwmon tests
perf tests: Make leader sampling test work without branch event
perf util: Remove kernel version deadcode
perf test shell trace_exit_race: Use --no-comm to avoid cases where COMM isn't resolved
perf test shell trace_exit_race: Show what went wrong in verbose mode
...

show more ...

perf build: Remove PERF_HAVE_DWARF_REGS

PERF_HAVE_DWARF_REGS was true when an architecture had a dwarf-regs.c
file. There are no more architecture dwarf-regs.c files, selection is
done using constan

perf build: Remove PERF_HAVE_DWARF_REGS

PERF_HAVE_DWARF_REGS was true when an architecture had a dwarf-regs.c
file. There are no more architecture dwarf-regs.c files, selection is
done using constants from the ELF file rather than conditional
compilation. When removing PERF_HAVE_DWARF_REGS was the only variable
in the Makefile, remove the Makefile.

Add missing SPDX for RISC-V Makefile.

Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

perf dwarf-regs: Remove PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET

PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET was used for BPF prologue
support which was removed in Commit 3d6dfae88917 ("perf parse-ev

perf dwarf-regs: Remove PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET

PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET was used for BPF prologue
support which was removed in Commit 3d6dfae88917 ("perf parse-events:
Remove BPF event support"). The code is no longer used so remove.

Remove the offset from various dwarf-regs.c tables and the dependence
on ptrace.h. Rename structs starting pt_ as the ptrace derived offset is
now removed.

Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

perf build: Rename NO_DWARF to NO_LIBDW

NO_DWARF could mean more than NO_LIBDW support, in particular no
libunwind support. Rename to be more intention revealing.

Signed-off-by: Ian Rogers <irogers

perf build: Rename NO_DWARF to NO_LIBDW

NO_DWARF could mean more than NO_LIBDW support, in particular no
libunwind support. Rename to be more intention revealing.

Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241017001354.56973-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.12-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'for-6.13/wacom' into for-linus

- Sanitization of BTN_TOOL_RUBBER handling (Jason Gerecke)

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>