Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 alternatives updates from Borislav Petkov:
"This is basically PeterZ's idea to nest the

Merge tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 alternatives updates from Borislav Petkov:
"This is basically PeterZ's idea to nest the alternative macros to
avoid the need to "spell out" the number of alternates in an
ALTERNATIVE_n() macro and thus have an ever-increasing complexity in
those definitions.

For ease of bisection, the old macros are converted to the new, nested
variants in a step-by-step manner so that in case an issue is
encountered during testing, one can pinpoint the place where it fails
easier.

Because debugging alternatives is a serious pain"

* tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer
x86/alternative: Replace the old macros
x86/alternative: Convert the asm ALTERNATIVE_3() macro
x86/alternative: Convert the asm ALTERNATIVE_2() macro
x86/alternative: Convert the asm ALTERNATIVE() macro
x86/alternative: Convert ALTERNATIVE_3()
x86/alternative: Convert ALTERNATIVE_TERNARY()
x86/alternative: Convert alternative_call_2()
x86/alternative: Convert alternative_call()
x86/alternative: Convert alternative_io()
x86/alternative: Convert alternative_input()
x86/alternative: Convert alternative_2()
x86/alternative: Convert alternative()
x86/alternatives: Add nested alternatives macros
x86/alternative: Zap alternative_ternary()

show more ...

x86/alternatives: Add nested alternatives macros

Instead of making increasingly complicated ALTERNATIVE_n()
implementations, use a nested alternative expression.

The only difference between:

ALT

x86/alternatives: Add nested alternatives macros

Instead of making increasingly complicated ALTERNATIVE_n()
implementations, use a nested alternative expression.

The only difference between:

ALTERNATIVE_2(oldinst, newinst1, flag1, newinst2, flag2)

and

ALTERNATIVE(ALTERNATIVE(oldinst, newinst1, flag1),
newinst2, flag2)

is that the outer alternative can add additional padding when the inner
alternative is the shorter one, which then results in
alt_instr::instrlen being inconsistent.

However, this is easily remedied since the alt_instr entries will be
consecutive and it is trivial to compute the max(alt_instr::instrlen) at
runtime while patching.

Specifically, after this the ALTERNATIVE_2 macro, after CPP expansion
(and manual layout), looks like this:

.macro ALTERNATIVE_2 oldinstr, newinstr1, ft_flags1, newinstr2, ft_flags2
740:
740: \oldinstr ;
741: .skip -(((744f-743f)-(741b-740b)) > 0) * ((744f-743f)-(741b-740b)),0x90 ;
742: .pushsection .altinstructions,"a" ;
altinstr_entry 740b,743f,\ft_flags1,742b-740b,744f-743f ;
.popsection ;
.pushsection .altinstr_replacement,"ax" ;
743: \newinstr1 ;
744: .popsection ; ;
741: .skip -(((744f-743f)-(741b-740b)) > 0) * ((744f-743f)-(741b-740b)),0x90 ;
742: .pushsection .altinstructions,"a" ;
altinstr_entry 740b,743f,\ft_flags2,742b-740b,744f-743f ;
.popsection ;
.pushsection .altinstr_replacement,"ax" ;
743: \newinstr2 ;
744: .popsection ;
.endm

The only label that is ambiguous is 740, however they all reference the
same spot, so that doesn't matter.

NOTE: obviously only @oldinstr may be an alternative; making @newinstr
an alternative would mean patching .altinstr_replacement which very
likely isn't what is intended, also the labels will be confused in that
case.

[ bp: Debug an issue where it would match the wrong two insns and
and consider them nested due to the same signed offsets in the
.alternative section and use instr_va() to compare the full virtual
addresses instead.

- Use new labels to denote that the new, nested
alternatives are being used when staring at preprocessed output.

- Use the %c constraint everywhere instead of %P and document the
difference for future reference. ]

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230628104952.GA2439977@hirez.programming.kicks-ass.net

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:

- Reduce memory u

Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:

- Reduce memory usage with CONFIG_DEBUG_INFO=y

In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.

On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.

These changes also improve the runtime significantly.

Debuggability improvements:

- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns

Unwinder improvements:

- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber

Cleanups:

- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables

Fixes for modern stack canary handling"

* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...

show more ...

objtool: Get rid of reloc->addend

Get the addend from the embedded GElf_Rel[a] struct.

With allyesconfig + CONFIG_DEBUG_INFO:

- Before: peak heap memory consumption: 42.10G
- After: peak heap mem

objtool: Get rid of reloc->addend

Get the addend from the embedded GElf_Rel[a] struct.

With allyesconfig + CONFIG_DEBUG_INFO:

- Before: peak heap memory consumption: 42.10G
- After: peak heap memory consumption: 40.37G

Link: https://lore.kernel.org/r/ad2354f95d9ddd86094e3f7687acfa0750657784.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...