Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- A significant effort all around the stac

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.

This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.

- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.

- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.

- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.

- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.

- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.

- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.

- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.

- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.

- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.

- Reduce tcp socket size by one cache line.

- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.

- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.

- Improve xsk generic performances with cache-alignment-oriented
optimizations.

- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.

Driver API:

- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.

- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.

- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.

- Add helper to create, prepare and enable managed clocks.

Device drivers:

- Add Huawei hinic3 PF etherner driver.

- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.

- Add ethernet driver for MaxLinear MxL862xx switches

- Remove parallel-port Ethernet driver.

- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().

- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.

- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors

- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation

- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC

- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework

- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema

- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust

- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling

- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211

- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support

- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections

- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"

* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

tools/net/ynl: suppress jobserver warning in ynltool version detection

When building ynltool with parallel make (-jN), a warning is emitted:

make[1]: warning: jobserver unavailable: using -j1.

tools/net/ynl: suppress jobserver warning in ynltool version detection

When building ynltool with parallel make (-jN), a warning is emitted:

make[1]: warning: jobserver unavailable: using -j1.
Add '+' to parent make rule.

The warning trips up local runs of NIPA's ingest_mdir.py, which
correctly fails on make warnings.

This occurs because SRC_VERSION uses $(shell make ...) to make
kernelversion. The $(shell) function inherits make's MAKEFLAGS env var
which specifies "--jobserver-auth=R,W" pointing to file descriptors that
the invoked make sub-shell does not have access to.

Observed with:

$ make --version | head -1
GNU Make 4.3

Instead of suppressing MAKEFLAGS and foregoing all future MAKEFLAGS
(some of which may be desirable, such as variable overrides) or
introducing a new make target, we instead just ignore the warning by
piping stderr to /dev/null. If 'make kernelversion' fails, the ' || echo
"unknown"' phrase will catch the failure.

Before:
NIPA ingest_mdir.py:

ynl
Full series FAIL (1)
Generated files up to date; build has 1 warnings/errors; no diff in
generated;

After:
NIPA ingest_mdir.py:

Series level tests:
ynl OKAY

Validated output:
$ ./ynltool/ynltool --version
ynltool 6.19.0-rc4

Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260112-ynl-make-fix-v1-1-c399e76925ad@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync-up some display code needed for Async flips refactor.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing l

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing layer with a lockless list.

Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.

- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.

Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.

Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.

- Optimize the NAPI skb cache, make it larger, use it in more paths.

- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).

- Various data structure layout and prefetch optimizations from Eric.

- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.

- Extend threaded NAPI polling to allow the kthread busy poll for
packets.

- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.

- Support memcg accounting of MPTCP socket memory.

- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.

- Improve heuristics for when to kick off AF_UNIX garbage collection.

- Allow users to control TCP SACK compression, and default to 33% of
RTT.

- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.

- Preserve skb metadata space across skb_push / skb_pull operations.

- Support for IPIP encapsulation in the nftables flowtable offload.

- Support appending IP interface information to ICMP messages (RFC
5837).

- Support setting max record size in TLS (RFC 8449).

- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

- Let users configure the number of write buffers in SMC.

- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.

- Some conversions away from the crypto_ahash API, from Eric Biggers.

- Some preparations for slimming down struct page.

- YAML Netlink protocol spec for WireGuard.

- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.

Driver API:

- Add CAN XL support to the CAN Netlink interface.

- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.

- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).

- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.

- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.

- Add standard device stats for PSP crypto offload.

- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.

- Add uAPI defines for 1.6Tbps link modes.

Device drivers:

- Add Motorcomm YT921x gigabit Ethernet switch support.

- Add MUCSE driver for N500/N210 1GbE NIC series.

- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.

- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.

- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules

- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device

- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices

- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control

- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality

- Bluetooth:
- add initial support for PASTa

- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements

- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...

show more ...

tools: ynltool: remove -lmnl from link flags

The libmnl dependency has been removed from libynl back in
commit 73395b43819b ("tools: ynl: remove the libmnl dependency")
Remove it from the ynltool Ma

tools: ynltool: remove -lmnl from link flags

The libmnl dependency has been removed from libynl back in
commit 73395b43819b ("tools: ynl: remove the libmnl dependency")
Remove it from the ynltool Makefile.

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251115225508.1000072-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynltool: correct install in Makefile

Use the variable in case user has a custom install binary.

Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20251111155214.2

tools: ynltool: correct install in Makefile

Use the variable in case user has a custom install binary.

Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20251111155214.2760711-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'tools-ynl-turn-the-page-pool-sample-into-a-real-tool'

Jakub Kicinski says:

====================
tools: ynl: turn the page-pool sample into a real tool

The page-pool YNL sample is qui

Merge branch 'tools-ynl-turn-the-page-pool-sample-into-a-real-tool'

Jakub Kicinski says:

====================
tools: ynl: turn the page-pool sample into a real tool

The page-pool YNL sample is quite useful. It's helps calculate
recycling rate and memory consumption. Since we still haven't
figured out a way to integrate with iproute2 (not for the lack
of thinking how to solve it) - create a ynltool command in ynl.

Add page-pool and qstats support.

Most commands can use the Python YNL CLI directly but low level
stats often need aggregation or some math on top to be useful.
Specifically in this patch set:
- page pool stats are aggregated and recycling rate computed
- per-queue stats are used to compute traffic balance across queues

v1: https://lore.kernel.org/20251104232348.1954349-1-kuba@kernel.org
====================

Link: https://patch.msgid.link/20251107162227.980672-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

tools: ynltool: add traffic distribution balance

The main if not only use case for per-queue stats today is checking
for traffic imbalance. Add simple traffic balance analysis to qstats.

$ ynltool

tools: ynltool: add traffic distribution balance

The main if not only use case for per-queue stats today is checking
for traffic imbalance. Add simple traffic balance analysis to qstats.

$ ynltool qstat balance
eth0 rx 44 queues:
rx-packets : cv=6.9% ns=24.2% stddev=512006493
min=6278921110 max=8011570575 mean=7437054644
rx-bytes : cv=6.9% ns=24.1% stddev=759670503060
min=9326315769440 max=11884393670786 mean=11035439201354
...

$ ynltool -j qstat balance | jq
[
{
"ifname": "eth0",
"ifindex": 2,
"queue-type": "rx",
"rx-packets": {
"queue-count": 44,
"min": 6278301665,
"max": 8010780185,
"mean": 7.43635E+9,
"stddev": 5.12012E+8,
"coefficient-of-variation": 6.88525,
"normalized-spread": 24.249
},
...

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251107162227.980672-5-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

tools: ynltool: add page-pool stats

Replace the page-pool sample with page pool support in ynltool.

# ynltool page-pool stats
eth0[2] page pools: 18 (zombies: 0)
refs: 171456 bytes: 70228377

tools: ynltool: add page-pool stats

Replace the page-pool sample with page pool support in ynltool.

# ynltool page-pool stats
eth0[2] page pools: 18 (zombies: 0)
refs: 171456 bytes: 702283776 (refs: 0 bytes: 0)
recycling: 97.3% (alloc: 2679:6134966 recycle: 1250981:4719386)
# ynltool -j page-pool stats | jq
[
{
"ifname": "eth0",
"ifindex": 2,
"page_pools": 18,
"zombies": 0,
"live": {
"refs": 171456,
"bytes": 702283776
},
"zombie": {
"refs": 0,
"bytes": 0
},
"recycling_pct": 97.2746,
"alloc": {
"slow": 2679,
"fast": 6135029
},
"recycle": {
"ring": 1250997,
"cache": 4719432
}
}
]

# ynltool page-pool stats group-by pp
pool id: 108 dev: eth0[2] napi: 530
inflight: 9472 pages 38797312 bytes
recycling: 95.5% (alloc: 148:208379 recycle: 45386:153842)
pool id: 107 dev: eth0[2] napi: 529
inflight: 9408 pages 38535168 bytes
recycling: 94.9% (alloc: 147:180178 recycle: 42251:128808)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251107162227.980672-3-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

tools: ynltool: create skeleton for the C command

Based on past discussions it seems like integration of YNL into
iproute2 is unlikely. YNL itself is not great as a C library,
since it has no backwa

tools: ynltool: create skeleton for the C command

Based on past discussions it seems like integration of YNL into
iproute2 is unlikely. YNL itself is not great as a C library,
since it has no backward compat (we routinely change types).

Most of the operations can be performed with the generic Python
CLI directly. There is, however, a handful of operations where
summarization of kernel output is very useful (mostly related
to stats: page-pool, qstat).

Create a command (inspired by bpftool, I think it stood the test
of time reasonably well) to be able to plug the subcommands into.

Link: https://lore.kernel.org/1754895902-8790-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251107162227.980672-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...